Looking for a puller wire? Have a look at this 2022 guide!
When you want to find puller wire, you may need to consider between many choices. Finding the best puller wire is not an easy task. In this post, we create a very short list about top 10 the best puller wire for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 puller wire:
Best puller wire
1. Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)
Feature
Perfect Flexibility and RigidityUnlike fiberglass wire, the Fish Tape Puller will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our PET Fish Tape has strong traction, good flexibility, Anti-aging and high temperature.Fish Tape with PET Reusable, excellent elasticity, the versatile Wire Puller is applicable for telecom, electrical wire, wall, floor conduit and other wiring installation. The Fish Cable is the perfect tool to assist you in pulling cables through occupied duct and panel boxes.
Fish Tape FastenerFish tape fastener is used to help wire fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly.
360Available Head WheelThe Head wheel at the end of the cable is 360 available, much easy to across through the bends. And the unique connection method makes it durable and convenient.
Attentionlt will take a little MORE STRENGTH to straighten the wire puller when you first use it. And the Wire Threader works great in smaller conduit, but not thicker cables or large pipe.
Description
The fish tapes are made of a non-conductive polymer that has a low coefficient of friction,allowing the tape to effortlessly glide
through EMT and PVC conduit much faster than steel and fiberglass fish tapes.
MaterialPET, Plastice Fastener with Steel rope.
Color: 12M Green Fish Cable and Red Fastener.
Size: 1200mm (40ft) x 4.3mm.
Package Content: 1 x 12M Green Fish Tape + 1 x Red Fastener.
How to Use? Please Pay Attention Below:
First, the line pipe should be paved properly (the elbow is best bent with a pipe bender), fix the line pipe;
Next, pass any end of the Fish tape through the line pipe, and pulls out a small segment of fish cable at another end;
Then, connect the wires and fish tape to Fastener;
Finally, one person pulls the end of the fish tape, and the other person slowly moves the wires into the pipe at another end.
When pulling difficult, you need to tap the pipe gently.
With bit pulling force, small friction and strong penetrating, the PET Fish Cable helps installers run network and power cables at home and the office.
Attention: The fish tape is used in the conduit only, but not in the wall directly.
A Fish Tape to End All Fish Tapes.
2. ABN Spark Plug Wire Puller & Install for Volkswagen & Audi, VW Spark Plug Tool Wire Puller Tool, Spark Plug Wire Tool
Feature
GET THE JOB DONE: The ABN | Spark Plug Wire Remover Tool makes changing spark plug connectors possible without removing the intake manifold or any fuel lines and rails; Easily fits on the end of the rubber boot to unlock/lock the boot and properly remove the plug wire without damageFITS YOUR VEHICLE: For Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads); Volkswagen - New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC); Audi - 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)
ACCESS DEEP SPARK PLUGS: Angled shaft allows access to deep plugs in hard-to-reach areas; 12.6-inch (32cm) overall length; 3.75" x 0.4" x 1.2" inch (9.5cm x 1cm x 3cm) handle, 9.25-inch (23.5cm) shaft, 2.2-inch x 0.8-inch (5.6cm x 2cm) boot end
EASY TO USE: No need to remove the intake - Simply push the spark plug boot removal tool down, turn, and pull; Perform spark plug change when engine is cold to prevent the heads from stripping; After pulling the plugs, we recommend applying lubrication to make the job easier; When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck
BUILT TO LAST: Handle constructed from hard plastic for comfort, less user fatigue, and more productivity; Shaft and boot end constructed from stainless-steel for maximum strength and longevity
Description
Save yourself from the frustration of trying to seat and unplug spark plug wires from poorly designed cars and instead use the ABN | Spark Plug Boot Puller. It makes it possible to change spark plug connectors without removing the intake manifold or any fuel lines and rails. Simply push the spark plug remover tool down, turn, and pull. This spark plug puller tool has an angled shaft to reach deep plugs on newer Volkswagen Beetle models and cars with 2.0 engines. It is suitable for VW Golf IV & V with 1.6 engine AZJ locking, VW, Audi, Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines. We recommend changing spark plugs when the engine is cold and applying lubrication (not included) to make the job easier. Not recommended for non-VW/Audi plug leads. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.3. AMERICAN POWER PULL CORP Pp7008 Fence and Wire Grip
Feature
Fence and Wire Grip used to stretch wire fencesAble to pull wire through conduit
Spring-loaded grip with 1;000 lbs. max capacity
Description
American Power Pull Fence and Wire Grip is for stretching smooth barb wire fence. Can be used for pulling wire through conduit. It has spring-loaded grip with 1,000 lbs. maximum capacity.4. Lisle 51250 Spark Plug Wire Puller
Feature
Removes Spark Plug Wire Boots from PlugsA simple, yet effective tool for disengaging spark plug boots
Tool performs well in difficult areas such as recessed and obstructed plugs
Square shaft prevents slipping
Thick plastic handle prevents electric shock and provides greater pulling power
Description
Removes Spark Plug Wire Boots from Plugs. A simple, yet effective tool for disengaging spark plug boots. Tool performs well in difficult areas such as recessed and obstructed plugs. Square shaft prevents slipping. Thick plastic handle prevents electric shock and provides greater pulling power.5. Madison Electric Products MWP Power Pull-It
Feature
Saves on labor costsPrecision bearing assembly
Sturdy construction
Reduces pulling fatigue and hand injuries
Description
Utilizes A Cordless Drill To Pull Wire Quickly And Efficiently.6. Vanitek 25 Foot Reach, Spring-Steel Fish Tape Reel, with High Impact Case, for Electric or Communication Wire Puller
Feature
Vanitek 25 feet Flat Flexible Spring-Steel Fish Tape with high impact plastic case and durable comfortable grip easy carry handle with built-in Thumb Lock for pulling electrical or communication wires. This reel winds up and stores excess tape as wire is pulled. Handle lever Assists on rolling the cable back in. The tape is 1/8'' x 1/16'' x 25' long with a pulling loop at the end.Perfect for Snaking/Thread or Pulling Cables and Wires through or Behind Ceiling, Walls/Drywall, Conduit, PVC, Pipe, Vent, Duct, Hose, Under Carpet or Insulation and more.
Use for your interior and exterior Electrical Site Wiring like, Outlet, Plug, Socket, light fixture, Ceiling Fan, Dimmer, Switch, short runs installing electrical box, Electrical Panel, Subwoofer Box, Switch Box, Junction Box, CPU, Breaker Box, Receptacle box, Transformer, Doorbell, Intercom, Surveillance Camera, DCC, Security systems, Smoke detector, Thermostat, Appliances, Hot Tub, Telephone/Internet Line or Cable TV Coax.
Also great for your vehicle's Wiring like for Alarm, Remote starter, Keyless entry, OnStar, Dash/Rear view Backup camera, Radar detector, Wi-Fi, Bluetooth, Entertainment system, Stereo, Horn, Audio speakers, Radio/cassette/Cd/MP3/DVD player units, USB port, GPS navigation, Fog lights, Headlights, And more for your Home, House, Car, Truck, SUV, Boat, Camper RV, ATV, UTV, Golf Car, and so.
A must for any wire and cable installation
Description
About the Vanitek 25 Foot Reach, Spring-Steel Fish Tape ReelThe Vanitek 25 Feet Fish Tape will make you easy to move or thread cables and Re-Wire through drywall, conduit or insulation. Simply guide the fish tape through the narrow opening, attach wires to the pulling loop and guide the wires to the new location smoothly and efficiently. It is housed in a sturdy carrying Reel case and is made from high-grade carbon steel for performance. An easy reel out allows you to finish the job faster without straining your body.1/8-Inch Wide 1/16 Inch Thick Steel 25 feet Long. Save a lot of money by doing your own wiring. Even if you've never picked up an electrical tool in your life, you can safely rough-in wiring by using the Vanitek Steel Fish Tape Reel while running cable throughout the room, and making the electrical connections.Easy-to-use installer's solution for pulling and installing cable in conduit.
Reel winds up and stores excess fish tape as the wire is pulled.
Strong pulling strength. Shatter proof.
Built-in thumb lock holds the wire in place.
Finger fitting grips around reel fits the hand comfortably.
Tape is wound directly into housing, no need to snap retaining tapes.
Greasy lubrication covers steel to help moving properly.
Exclusive hand trigger assembly helps wind tape tightly as it automatically wipes off excess lubricant.
End is tapered in formed Hook so that you can attach a cord or cable and pull it back through the wall.
Stiff enough for getting up a wall from the floor below.
Sturdy enough to support such an application.
No problem pushing it through several curvy parts of the conduits or raceway.
Glides through tricky bends without sticking or snagging.
Pull wire through a tight-spaced conduit or raceway with the Ideal Turf-Grip.
Trigger allows the snake to be forced without stressing the reel and always easy and smooth pull-out and rewind motion.
7. Lisle 51600 Spark Plug Wire Puller
Feature
It is also pull cartridge fuseComes in skin-pack
Pliers jaw is made to pull spark plug boots from different angles
The double-ended tool also pulls cartridge fuses up to 1 inches in diameter
Made of glass-filled nylon for shock resistance and extra strength
Description
Pliers jaw is made to pull spark plug boots from different angles. The double-ended tool also pulls cartridge fuses up to 1 inches in diameter. Made of glass-filled nylon for shock resistance and extra strength. It is also pull cartridge fuse. Comes in skin-pack.8. ezitown Fiberglass Fish Tape Kit Connectable Cable Puller Yellow Diameter 4mm 33 FT Pull Push Electrical Wire Rods with Hook and Eye
Feature
Fiberglass material, 3/16" 4mm diameter, hard but do not bend forcibly while usingSell with fish tape fastener kits, easy to use through corner and the wire knot will not lock in corner
Plastic storage case, easy to carry and store, pc material tube is solid and sturdy
Bright yellow rods are highly visible, brass terminal and hook will never rust
Total 10 pcs, 1 meter/pc, can be extended up to 33' and combined with second kit
Description
EZITOWN Fiberglass Fish Tape Kit is easy for everyone to use. No matter if it's difficult electric wiring installation, use our sturdy fiber glass, solid brass connectors, bendable extension, just by connecting and pushing and pulling, you will get the job done. It is great for running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, etc.EZITOWN Fiberglass Fish Tape Kit contains:
10 Rods: Length 39 Inches/1 Meter, Diameter 3/16"/4mm, can be extended up to 33' and combined with second kit
Fastener kits: a brass hook, an eyelet, brass push and pull rods, a flexible search head connector and a flexible extension connector which can be set to any angle (see more details in the picture)
A plastic storage case
9. Lisle 51420 Double Offset Spark Plug Boot Removal Pliers
Feature
The 5/8" opening of the pliers properly fits spark plug wire boots to help prevent damageOffset design works great on boots with heat sleeves found on some GM engines
Easy-to-use in tight spaces such as rear boots on V6 transverse mounted engines
Pliers can also be used on Hoses and for Holding other objects
Description
Used to remove stubborn spark plug wires. The 5/8" opening of the pliers properly fits spark plug wire boots to help prevent damage.10. ECO-WORTHY Fish Tape Fiberglass 6MM 425FT Reel Wire Cable Running Rod Duct Rodder Fishtape Puller
Feature
Cable Length: 426.5ft (130m)Cable Diameter: 6mm (1/4'')
Welded by high-quality steel, sturdy and durable, with good compression resistance capacity and proper structure.
Fish tape fiberglass: light weight, durable, resistance to acid and alkali, aging resistant,
Aluminum Cage
Description
Specification:Cable Length: 426.5 Ft/130m
Cable Diameter: 6mm(1/4'')
Min Bend Radius: 295mm
Breaking Tension: 4.5T
Work Situation Temperature: -40~+80
Epoxy Fiberglass (Inner) And High Density Polyethylene (Outer)
Package Size: 71 x 59 x 25cm (28 x 23 x 10inch)
Package Includes:
1 x Set Fish Type
Recent Comments