Top vent grilles
If you looking for vent grilles then you are right place. We are searching for the best vent grilles on the market and analyze these products to provide you the best choice.
Best vent grilles
1. 30" x 8" RETURN GRILLE - Easy Air FLow - Flat Stamped Face
Feature
Sidewall and/or Ceiling GrilleEasy Unrestricted Air Flow For Youre HVAC System
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Screws Included
No Sharp Surface Edges
Description
30w" x 8h" opening (vent hole) dimension - actual size is approx 2" wider.You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you'll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still very thin.
2. HG POWER 6 Inch Round Air Vent ABS Louver Grille Cover White Soffit Vent with Built-in Fly Screen Mesh for Bathroom Office Kitchen Ventilation
Feature
Built in fly screen mesh: it helps to prevent pests from entering your homePremium material: new high quality ABS was adopt, environment friendly and non-toxic.
Easy to use: the white panel can be freely detached, very convenient to clean and maintain.
Easy to install: available for wall mounted or ceiling mounted.
Diameter of 6 Inch, stylish design, ideal for room exhaust and ventilation use.
Description
Specification:material: ABS
size: 6 inch
color: white +black
Ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat
transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses.
3. Speedi-Grille SG-146 RAG 14-Inch by 6-Inch White Return Air Vent Grille with Fixed Blades
Feature
Speedi-Grille is made in the USAStamped 1/2-Inch fan shaped louvers
Louvers are parallel to longest side
Solid steel construction. Soft white paintable powder coat finish
Fits Duct Opening: 14"x6", Overall Size:15-9/16"x7-9/16"
Description
Speedi-Grille (Return) is a surface mount grille that can be installed with louvers in up or down position for a vision-proof effect. Speedi-Grille also comes in other sizes and styles which are available on this web site or by special order. Grille trim screws must be installed for secure installation. (Speedi-Grille can be installed in a non-Speedi-Boot installation).4. 20" X 30 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5"w X 32.5"h]
Feature
20"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5" Width X 32.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel and No Sharp Edges
Our Filter Grille Latch is Easy To Use On Your Fungers And Requires No Screwdriver To Open.
Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
20" X 30 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White20"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5" Width X 32.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
5. 12" x 2 Toe Space Grille - HVAC Vent Cover
Feature
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just WaxedQuality Packaging - Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
Smooth Surface Edges - Run Your Fingers Across The Surface To Feel The Smoothness
Easy Unrestricted Air Flow For Your HVAC System
12" x 2opening (vent hole - Neck Size) dimension - actual size is approx 2" wider
Description
12" x 2 Toe Space Grille - HVAC Vent CoverYou may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you'll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
Easy Unrestricted Air Flow For Your HVAC System
Easy Unrestricted Air Flow For Your HVAC System
Easy Unrestricted Air Flow For Your HVAC System
6. uxcell 400mmx80mm Aluminum Alloy Rectangular Ventilation Grille Air Vent Louvered Cover
Feature
Total Size: 400 x 80 x 15mm/16" x 3.15" x 0.6"(L*W*H); Package Content: 1 x Ventilation GrilleWeight: 106g; Product Name: Ventilation Grille
Material: Aluminum Alloy; Each Hole Size: 30 x 4mm/1.2" x 0.16"(L*W)
Main Color: Silver Tone; Fit for Install Hole Size: 366 x 64mm/14.4" x 2.5"(L*W)
Mount Hole Size: 3mm/0.12"; Mount Hole Distance: 315mm/12.4"
Description
Rectangle shape design.Made by aluminum alloy, anti-corrosion.
Ideal for ventilation of closed spaces.
Fixing on cabinet back or side panels for air ventilation purpose. Such as shoes cabinet, showcase with lightings, computer cabinet.
Need to cut square hole on cabinet back or side panel.
Easy to install and clean.
7. 24" X 18 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White
Feature
24"w X 18"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.5" Width X 20.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Our Filter Grille Latch is Easy To Use On Your Fungers And Requires No Screwdriver To Open.
Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
24" X 18 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White24"w X 18"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.5" Width X 20.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
8. 14"w X 14"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 15.75"w X 14.75"h]
Feature
14"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X "w X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
14"w X 14"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White14"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X "w X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
9. 10"w X 10"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 11.75"w X 11.75"h]
Feature
10"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X "w X 11.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
10"w X 10"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White10"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X "w X 11.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
10. 24"w X 24"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 25.75"w X 25.75"h]
Feature
24"w X 24"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 25.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
24"w X 24"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White24"w X 24"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 25.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
Recent Comments