Top 16 i3 y plate for 2022
What are criterias of the best i3 y plate? It is not easy to find the answer. We spent many hours to analyst top 16 i3 y plate and find the best one for you. Let’s find more detail below.
Best i3 y plate
![[Gulfcoast Robotics] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicator i3 3D Printers](https://m.media-amazon.com/images/I/41LSqGT+KzL.jpg)
![[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.](https://m.media-amazon.com/images/I/51RX52S+XIL.jpg)
![[DIYE] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers - Updated](https://m.media-amazon.com/images/I/41+gs6aJYmL.jpg)
1. [Gulfcoast Robotics] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicator i3 3D Printers
Feature
Compatible with Maker Select and Wanhao Duplicator V1, V2, V2.1 and Plus 3D PrintersDrop-in replacement for stock Y carriage, requires no modification
High quality production, manufactured by USA Company
Made of stiff, tempered 6061-T6 Aluminum Alloy. Brushed and anodized
Supports 3 point level adjustment for heated beds
Description
Please note that this product was designed only for Wanhao Duplicator, Maker Select and similar 3D Printers with 140mm distance between Y rods. Do not use this product for typical Prusa i3 like 3D Printer with 170mm Y rods distance. We have different Y carriage plates for other 3D Printers in our online store.
Maker Select Y Carriage Plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select, V2, V2.1 and Plus. Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick. Has additional provisioning hole for 3 point level adjustment of build surface. Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Package Contents
1 x Anodized Aluminum Carriage Plate for Maker Select and Wanhao Duplicator 3D Printers.
2. BMW i License Plate Frame
Feature
Powder-coated with the striking BMW i Blue ColorCoating includes special reflective material that will appear to glow under the direct headlight focus
Comes with matching mounting hardware-hiders to complete the look
Stainless steel base with BMW i logo
3. GO-3D PRINT 220mm x 220mm Borosilicate Glass Plate/Bed w/Flat Polished Edge for MK2 MK3 Heated Bed 3D Printer
Feature
This glass is 220mm x 220mm and NOT for Creality3D Ender 3 3D PrinterTo print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.
Flat Polished Edge for safe to handle
Good fits Anet A8 and most of I3 MK2 MK3 Heated Bed 3D Printers
Designed by GO-3D Print in California
4. [Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.
Feature
Thick 4mm glass plate will not warp or bend under heatCompatble with Maker Select, Wanhao Duplicator, Anet A8 and other 3D Printers
219x219mm outer size, see attached drawing for details.
Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8
100% Borosilicate glass content
5. Platypus License Plate Mount for The BMW i3 | 2014-2019 | No Drilling | Installs in Seconds | Made of Stainless Steel & Aluminum | Made in The USA
Feature
IMPROVE THE LOOK OF YOUR BMW: This is not a one size fits all. We tested hundreds of configurations on vehicle models to fit the exact model of your BMW i3 (2014-2019). The Platypus fits your bumper like it was meant to be thereEASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, leaving no trace that it was ever there.
NO DRILLING, NO RISKS: The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates.
BUILT TO LAST FOREVER: The Platypus plate is machined from 6061 aluminum with a durable black powder-coat finish that will not rust, fade, or bend.
MADE IN USA: Each Platypus is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
6. 3D Printer Glass Bed Upgraded, Borosilicate Glass Plate w/Corners Cut for Monoprice Maker Select V2 Anet A8/A6 Wanhao Duplicator i3 220x220x3mm with4 Glass Clips
Feature
Borosilicate Glass High binding power when heating. Easy to separate the plastic parts when cooling.Size 220mm x 220mm x 3mm.Compatble with Maker Select V2, Wanhao Duplicator, Anet A8, Anet A6 and other 3D Printers.
Safety Flat Polished Edge for safe to handle.
Hight quality Resistant to thermal shock compared to regular glass. A good build plate upgrade replacement.
Flat Enough Reduces warping,keep the printing surface level.
7. Li-SUN Aluminum Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1 V2 V2.1 Plus 3D Printers with Nozzle Cleaning Needles
Feature
Works for Maker Select and Wanhao Duplicator V1, V2, V2.1 and Plus 3D Printers.Drop-in replacement for stock Y carriage, requires no modification.
Made of high quality Anodized 6061-T6 Aluminum Alloy.
Supports 3 points level adjustment for heated beds.
Includes 3 pcs stainless steel cleaning needle for the nozzle (Diameter: 0.2mm, 0.3mm, 0.4mm). One year warranty. For any reason you're not completely satisfied with the product, you can ask for a replacement or full refund.
8. VIPMOTOZ Full LED License Plate Light Tag Lamp Assembly Replacement Pair For BMW 6-Series Z4 i3 X2 & Mini Cooper Clubman Countryman Paceman - 6000K Diamond White, 2-Piece Set
Feature
[5X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chipsto Maximize Rear End Illumination[Fully Plug & Play] - Simply Remove Original T10 Bulbs & Connect The Plug. Done.
[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.
[SAE & DOT Approved] - 100% Street Legal. Meet All Regulations In USA & Canada.
[Purchase with Confidence] - Limited Lifetime Warranty to Ensure 100% Satisfaction
9. 1pcs Prusa i3 MK3 Aluminum and axis Belt tensioner kit for Prusa I3 MK3 and axis Adjustable Belt Tensioner kit
10. XtremeAmazing Front Bumper Tow Hook License Plate Mount Bracket Holder Bolt Adapter Relocation Kit
Feature
Fit BMW F22 2 series 2012 up, BMW F30 Sedan/F31 Wagon 3 series 2012-up, BMW F32 F33 F36 4 Series 2012-up, BMW F10 F11 F07 5 Series 2011-up, BMW F25 X3,2015-up BMW F26 X4 2011-up, 2009-up BMW Z4, BMW 220i 230i 320i 328d 330e 330i 340i 420i 430i 440i 520i 530i 540iEasy installation, No drill or modification required, directly screw into the tow hook area/hole
8 mounting holes to ensure plate will not block intake vents / lights / sensors, come with angle adjustment and 2 size of spacer for plates to follow the curve of the bumper
Package Contents: 1 x License plate bracket bar , 1 x License plate mounting plate , 1 x Spacer , 1 x Pack of Steel locking screws and nut
11. [DIYE] Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers - Updated
Feature
Upgrade Replacementfor Wanhao Duplicator i3 andMonoprice Maker SelectAnodized 3mm Thick aluminum alloy plate
Allows configuration of 3x linear bearings and configuration of 4x bearings.
Additional supply hole for 3-point construction surface adjustment
High Quality Manufactured
12. BCZAMD V2 Aluminum Y Carriage Plate Upgrade for Prusa i3 Style Heatbed Hotbed Reprap DIY 3D Printer Parts, Black
Feature
Prusa i3 V2 Plate size: 219mmx219mmx3mm. Apply to prusa i3 style 3d printers, MK1/2/A/B heated beds.Has 2 x additional provisioning holes for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration. Made of stiff, tempered aluminum alloy, brushed and anodized.
Has cutout similar to original Prusa i3 Y carriage design. This helps to clear with Y motor when you use LM8UUs on straps and Y plate is laying low.
Linear bearing mounting options: LM8UUa (M3x12 screws & M3 nuts), SC8UUs (M4x10 screws) and SCV8UUs (M4x10 screws).
13. FYSETC 3D Printer Heatbed Parts Upgrade Aluminum Y Carriage Anodized Y Axis Plate for Maker Select/Wanhao Duplicator i3/ i3 Mega Printers, Silver
Feature
This is an amazing, solid piece and a must buy upgrade Bed accessories, Compatible with Wanhao Duplicator V1 V2 V2.1 Plus Serial Printer, Monoprice Maker Plus family of printers, i3 Mega.Great improvement, Drop-in replacement for stock Y carriage, requires no modification, Supports 3 point level adjustment for heated beds.
Thickness: about 3.1mm , slightly heavier than the old one, slightly thicker, and much stiffer.
Solid milled aluminum plate: Made of stiff, tempered 6061-T6 Aluminum Alloy. Brushed and anodized.
After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or Q&A us, we and our engineers are very happy to assist you.
14. BCZAMD Prusa I3 MK3 MK52 Gold Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate for Prusa i3 MK2.5S MK3 MK3S, 253.8 x 241MM
Feature
It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.Size: 253.8 x 241mm. It is a must 3d printer part for Prusa I3 MK3 MK52 DIY or replace a new printer hot bed build surface.
Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain.
Get you out of the trouble (Bubble) when plastic film decreased after a period of usage.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
15. GO-3D PRINT 220mm x 220mm Polypropylene Glass Fiber Build Plate Bed w/Corners Cut for Wanhao i3 Anet A8 MP Maker Select 3D Printer Platform
Feature
Size: 220mm x 220mm x 2mm w/ corner cutTo print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.
Be sure to print your Z Spacer before install the build plate
Good fit Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers
Designed by GO-3D Print in California
16. FYSETC 3D Printing Buildplate Steel Spring Sheet Bed w/Corner Cut 220x220mm/ 8.6x8.6 inch with PEI B Magnetic Mounting Base for Anet A8 Wanhao Duplicator i3 Monoprice Maker
Feature
Upgrade Replacement FlexPlate for Wanhao Monoprice 220 hotbed: Cut corner to fit well, flexible, removable.Complete FlexPlate build surface System: Include FlexPlate, a magnetic mounting base and PEI print surface.
Specially-coated FlexPlates are resistant to rust and work on both heated and non-heated print beds. The FlexPlate is engineered to maintain shape over time.
Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
About How to install the PEI well on the Steel spring: clean the steel spring with some alcohol; rip off the PEI 3M adhesive, spray some alcohol on the PEI surface, then directly stick on the steel spring surface, rip off the PEI dustproof film
Recent Comments