Which is the best subaru quick release fasteners?
Finding your suitable subaru quick release fasteners is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best subaru quick release fasteners including detail information and customer reviews. Let’s find out which is your favorite one.
Best subaru quick release fasteners
1. Dewhel JDM Quick Release Fastener Bumper Fender Trunk Hatch Screws Kit Set (Black)
Feature
black color powder-coated anodized finishAllow quickly, easily and frequently removal
Perfect for front bumpers, rear bumpers, trunk/hatch lids, etc
For off-road use only
Made with 6061 T6-grade high quality solid billet aluminum
Description
DescriptionQuantity: one set
Color: Red/Green/Black/Silver/Gold
Contents:
4x Nuts
4x washers
4x Stainless Bolts
2x O-Ring Fasteners
4x Aluminum Fasteners
Application: universal for all vehicles
100% brand new,never used or installed.
Easy to install,installation instructions not included.
2. iJDMTOY Universal Fit Blue Finish JDM Quick Release Fastener Kit For Car Bumper Trunk Fender Hatch Lid
Feature
Universal fit for most cars (sedan/coupe/convertible)Come with (4) blue color powder-coated anodized finish aluminum fasteners, (4) sets of stainless bolts/nuts/washers, (2) high strength fastener O-ring rubber bands
Made with T6 6061 high quality solid billet aluminum
Perfect for front or rear bumpers, hood, trunk or hatch lids, etc for a quickly, easily and frequently removal
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
This page features one complete set of Bumper Quick Release Fasteners in powder-coated anodized blue finish.
This Quick Release Fasteners are ideal for front bumpers, rear bumpers, and trunk / hatch lids, that you need to remove frequently, or remove and reinstall quickly, such as in the pits.
This complete set includes
4 pieces powder-coated anodized finish aluminum quick release fasteners
4 pieces steel washers
4 pieces steel locking nuts with screws
2 pieces O-rings
Universal fit:
Acura MDX RDX RL RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Cruze Malibu Silverado 1500 2500HD 3500HD Tahoe
Dodge Avenger Caliber Challenger Charger Dart Durango Neon Ram
Ford Edge Escape Explorer F-150 F-250 F-350 Fiesta Flex Focus Fusion Mustang
GMC Canyon Denali Sierra Yukon
Honda Accord Civic CR-V CR-Z Element Fit Pilot Ridgeline
Hyundai Genesis Santa Fe Sonata Tucson
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX60 QX70 QX80
Jeep Compass Grand Cherokee Patriot Wrangler
Lexus CT ES GS GX HS IS LS LX RX SC
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GL GLA GLK ML R S
Nissan 350Z 370Z Altima Cube Frontier Juke Maxima Murano Rogue Sentra Titan Xterra
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy Outback WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Land Prius RAV4 Sequoia Sienna Tacoma Tundra
Volkswagen Beetle CC Eos Golf GTI Jetta Passat Rabbit, etc
3. Anxingo Quick Release Fasteners for Car Bumpers Trunk Fender Hatch Lids Kit (Red)
Feature
Fist for Acura Chevrolet Infiniti Lexus Mazda Scion Dodge Ford Nissan Subaru Toyota Audi Cadillac Chrysler GMC Honda Jeep BMW Mercedes-Benz Mitsubishi Porsche Volkswagen Ford.Package includes: 4 pcs powder-coated anodized finish aluminum quick release fasteners, 4 pcs steel washers, 4 pcs steel locking nuts with screws, 2 pcs O-rings
Powder-coated anodized finish, Made with 6061 T6-grade high quality solid billet aluminum.
Perfect for front bumpers, rear bumpers, trunk/hatch lids, etc Allow quickly, easily and frequently removal.
For off-road use only.
Description
Universal Fitment:Acura MDX RDX RL RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Cruze Malibu Silverado 1500 2500HD 3500HD Tahoe
Dodge Avenger Caliber Challenger Charger Dart Durango Neon Ram
Ford Edge Escape Explorer F-150 F-250 F-350 Fiesta Flex Focus Fusion Mustang
GMC Canyon Denali Sierra Yukon
Honda Accord Civic CR-V CR-Z Element Fit Pilot Ridgeline
Hyundai Genesis Santa Fe Sonata Tucson
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX60 QX70 QX80
Jeep Compass Grand Cherokee Patriot Wrangler
Lexus CT ES GS GX HS IS LS LX RX SC
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GL GLA GLK ML R S
Nissan 350Z 370Z Altima Cube Frontier Juke Maxima Murano Rogue Sentra Titan Xterra
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy Outback WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Land Prius RAV4 Sequoia Sienna Tacoma Tundra
Volkswagen Beetle CC Eos Golf GTI Jetta Passat Rabbit, etc
4. QUIOSS Red Quick Release Fasteners For Car Bumpers Trunk Fender Hatch Lids Kit
Feature
Condition: Brand new and high quality, well packedSurface Finish: Red
Fits many Subaru Hyundai Ford Nissan models (see details)
Package includes all the accessories in the pictures
3-month hassle-free return and money back, please buy with confidence
Description
Welcome to QUIOSS.
We provide 100% perfect customer service, please contact us if you have ANY question!
These Quick Release Fasteners are ideal for front bumpers, rear bumpers, and trunk / hatch lids, that you need to remove frequently, or remove and reinstall quickly, such as in the pits.
Features:
Bolt Size:(M6) 6mm*20mm
Washer size: 23mm*11mm
Powder-coated anodized finish
Made with 6061 T6-grade high quality solid billet aluminum
Perfect for front bumpers, rear bumpers, trunk/hatch lids, etc
Allow quickly, easily and frequently removal
Professional installation recommended (no instruction included)
For off-road use only
Color: Red
Fit models:
Subaru: 2013-2014 BRZ, 2000-2013 Forester, 2006-2011 Impreza, 2000-2011 Legacy
BMW: 2003-2005 320i
Ford: 2004-2012 Focus, 2008-2010 Fiesta
Hyundai: 2011-2012 Elantra, 2009-2010 Genesis
Mitsubishi: 2005-2012 Lancer
Nissan: 2010-2012 370Z, 2000-2012 Altima, 2009-2011 Frontier, 2009-2011 GT-R
Audi: 2007-2011 A4
Chevrolet: 2005-2010 Aveo
Dodge: 2004-2007 Caravan
Package includes:
4 pcs powder-coated anodized finish aluminum quick release fasteners
4 pcs steel washers
4 pcs steel locking nuts with screws
2 pcs O-rings
5. For BRZ And Mits Only! JDM Flush Kit Front Quick Release Bumper Fastener Frame Neochrome
Feature
Quantity: 4 PIECESColor: Anodized NEO CHROME
This bumper quick release kit allows you to take off the bumper bolts in a few seconds
Fits Subaru, Mitshibishi and Infiniti
Made of High Quality CNC Machined Aluminum
Description
This kit also fix the unflush problem caused by the bumper being taken off many times. Comes with steel bolts and nuts. Please note that they have to be mounted on the bumper surface. Drilling is needed for installation. Please check dimension in the pic. Installation instruction is not included. Professional auto installation experience needed. We do carry other colors. Please visit our store! Washer: 24mm in diameter, bolt size: 6mm6. beler 4pcs Universal Rubber O-Rings Bands Bumper Fender Quick Release Fasteners Replacement
Feature
Color: BlackMaterial: Rubber
Easy to crack when you have too much tension or stretch.
Quick release fastener replacement O-rings.
Easy to use.
Description
Specifications
Condition: 100% new
Color: Black
Material: Rubber
Outside Ring Diameter: 5.5cm (2.16 inch)
Inner Ring Diameter: 4.4cm (1.73 inch)
Compatible With: Fit for car
Item included: 4 x Replacement Rubber O-Ring
Feature:
1) Made of rubber.
2) Quick release fastener replacement O-rings.
3) Easy to use.
7. CravenSpeed Platypus License Plate Mount for Subaru XV Crosstrek 2019 | No Drilling | Made of Stainless Steel & Aluminum | Made in USA
Feature
IMPROVE THE LOOK OF YOUR SUBARU: This is not a one size fits all. We tested hundreds of configurations on vehicle models to fit the exact model of your Subaru XV Crosstrek (2019). The Platypus fits your bumper like it was meant to be there.EASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, leaving no trace that it was ever there.
NO DRILLING, NO RISKS: The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates.
BUILT TO LAST FOREVER: The Platypus plate is machined from 6061 aluminum with a durable black powder-coat finish that will not rust, fade, or bend.
MADE IN USA: Each Platypus is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
Description
The Platypus mounts to the tow hook eye that is hidden on your bumper. Now you can install a front license plate onto your brand new car with no drill required. This tow hook mounted plate is also easily removable for track days and shows; it takes less than 5 minutes to install, and even less to remove with the included low profile wrench.This is true American made stuff and will last forever! The stud is 6061 aluminum (Read: plenty strong but still softer than the frame of the vehicle so that it cannot damage anything.) The studs for our plate mount are designed over-sized so that they do not vibrate loose, and you will want (NEED!) tools to install it. The plate backing is 12 gauge steel that is treated and powder coated to prevent rust and color fading. It has enough thickness to make it completely solid (ordinary humans cannot bend the plate backing with by hand), but once installed you will be able to adjust the angle of the tab with just your hands. The included hardware is all stainless steel, with button heads for a clean look once installed.
This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off. Use the included low-profile wrench to slightly loosen the bolt that attaches the backplate, then slide the backplate off of the stud. The plate is balanced to ensure that even if it were to come loose accidentally, it would still hang on the stud so that your plate does not fall off.
NOTE: The included hardware is just the right length for a plate, and not long enough to also mount a plate frame. Contact CravenSpeed for longer bolts or specs for your friendly local hardware supplier.
IMPORTANT: This model was designed for, and fits ONLY the following years of the Subaru XV Crosstrek:
- 2019
- Subaru Impreza 2017
- Subaru Impreza 2018
- Subaru Impreza 2019
- XV Crosstrek 2013
- XV Crosstrek 2014
- XV Crosstrek 2015
- XV Crosstrek 2016
- XV Crosstrek 2017
- XV Crosstrek 2018
8. CravenSpeed The Platypus License Plate Mount for The Subaru Impreza | 2017-2019 | No Drilling | Installs in Seconds | Made of Stainless Steel & Aluminum | Made in USA
Feature
IMPROVE THE LOOK OF YOUR SUBARU: This is not a one size fits all. We tested hundreds of configurations on vehicle models to fit the exact model of your Subaru Impreza (2017-2019). The Platypus fits your bumper like it was meant to be there.EASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, making car washes a breeze!
NO DRILLING, NO RISKS: The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates.
BUILT TO LAST FOREVER: The Platypus plate is machined from 6061 aluminum with a durable black powder-coat finish that will not rust, fade, or bend.
MADE IN USA: Each Platypus is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
Description
The Platypus mounts to the tow hook eye that is hidden on your bumper. Now you can install a front license plate onto your brand new car or aero kit with no drill required. This tow hook mounted plate is also easily removable for track days and shows; it takes less than 5 minutes to install, and even less to remove with the included low profile wrench.This is true American made stuff and will last forever! The stud is 6061 aluminum (Read: plenty strong but still softer than the frame of the vehicle so that it cannot damage anything.) The studs for our plate mount are designed over-sized so that they do not vibrate loose, and you will want (NEED!) tools to install it. The plate backing is 12 gauge steel that is treated and powder coated to prevent rust and color fading. It has enough thickness to make it completely solid (ordinary humans cannot bend the plate backing with by hand), but once installed you will be able to adjust the angle of the tab with just your hands. The included hardware is all stainless steel, with button heads for a clean look once installed.
This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off. Use the included low-profile wrench to slightly loosen the bolt that attaches the backplate, then slide the backplate off of the stud. The plate is balanced to ensure that even if it were to come loose accidentally, it would still hang on the stud so that your plate does not fall off.
NOTE: The included hardware is just the right length for a plate, and not long enough to also mount a plate frame. Contact CravenSpeed for longer bolts or specs for your friendly local hardware supplier.
IMPORTANT: This model was designed for, and fits ONLY the following:
9. CravenSpeed The Platypus License Plate Mount for Subaru XV Crosstrek | 2013-2018 | No Drilling | Installs in Seconds | Made of Stainless Steel & Aluminum | Made in USA
Feature
IMPROVE THE LOOK OF YOUR SUBARU: This is not a one size fits all. We tested hundreds of configurations on vehicle models to fit the exact model of your Subaru XV Crosstrek (2013-2018). The Platypus fits your bumper like it was meant to be there.EASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, leaving no trace that it was ever there.
NO DRILLING, NO RISKS: The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates.
BUILT TO LAST FOREVER: The Platypus plate is machined from 6061 aluminum with a durable black powder-coat finish that will not rust, fade, or bend.
MADE IN USA: Each Platypus is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
Description
The Platypus mounts to the tow hook eye that is hidden on your bumper. Now you can install a front license plate onto your brand new car or aero kit with no drill required. This tow hook mounted plate is also easily removable for track days and shows; it takes less than 5 minutes to install, and even less to remove with the included low profile wrench.This is true American made stuff and will last forever! The stud is 6061 aluminum (Read: plenty strong but still softer than the frame of the vehicle so that it cannot damage anything.) The studs for our plate mount are designed over-sized so that they do not vibrate loose, and you will want (NEED!) tools to install it. The plate backing is 12 gauge steel that is treated and powder coated to prevent rust and color fading. It has enough thickness to make it completely solid (ordinary humans cannot bend the plate backing with by hand), but once installed you will be able to adjust the angle of the tab with just your hands. The included hardware is all stainless steel, with button heads for a clean look once installed.
This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off. Use the included low-profile wrench to slightly loosen the bolt that attaches the backplate, then slide the backplate off of the stud. The plate is balanced to ensure that even if it were to come loose accidentally, it would still hang on the stud so that your plate does not fall off.
NOTE: The included hardware is just the right length for a plate, and not long enough to also mount a plate frame. Contact CravenSpeed for longer bolts or specs for your friendly local hardware supplier.
IMPORTANT: This model was designed for, and fits ONLY the following Subarus:
10. Car Repair Equipments - Bumper Fasteners Clips Subaru Automotive Fastener Removal Tool - 10pcs Side Skirt Door Sill Card Panel Linning Repair Trim Clips For Mercedes Benz - Fastener Removal Tool
Feature
80 % ORDERS ARRIVE WITHIN 7 - 12 BUSINESS DAYS:This item can be searched by below relevant keywords: Fastener removal tool remover pliers snapon front bumper fasteners honda civic toyota cover subaru clips clicker climate knob clip assortment
Subaru clips fasteners clicker climate knob clip assortment visor glasses angel driver garage door opener light sunglasses guardian mirror cross religio clipper clipon honda bumper quick release 1997 stop emblem decal bumpers cover retainer 2000 1998 brackets bolts accord 2013
Honda bumper clips quick release fasteners 1997 stop emblem decal bumpers cover retainer 2000 1998 brackets bolts accord 2013 10mm gold fastener rivet 2001 ford mtang rubber bands tool chevy pickup 2500 purple automotive clip removal assortment toyota remover board screw pullers tree
Automotive clips clip removal tool assortment toyota fasteners remover board screw pullers tree clipboard plier 10mm ford honda metal nissan auto body tools filler repair hammer sander stand tape primer paint pulling clamps plugs paper machine supplies putty parts subaru bumper quick release sticker guard cover forester engine
Description
Specification:Color: White
Material: Plastic
Type: Fastener push in repair trim clips
Size: As picture shown
Quantity: 1 Set = 10 Clips = 20 pcs
Fitment: For MERCEDES BENZ
Note:
1. Please check the size measurement chart carefully before making payment.
2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
Package includes:
1 x One Set Trim Clips
Recent Comments