Which are the best arduino sd card available in 2022?
We spent many hours on research to finding arduino sd card, reading product features, product specifications for this guide. For those of you who wish to the best arduino sd card, you should not miss this article. arduino sd card coming in a variety of types but also different price range. The following is the top 10 arduino sd card by our suggestions:
Best arduino sd card
![Adafruit MicroSD Card Breakout Board+ [ADA254]](https://images-na.ssl-images-amazon.com/images/I/51uTuPMJr2L.jpg)
1. ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice packageThe most economical way to starting Arduino programming for those beginners who are interested
Lcd1602 module with pin header (not need to be soldered by yourself)
This is the upgraded starter kits with power supply module, 9V battery with dc
High quality kite with uno R3, 100 percent compatible with Arduino uno R3
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire
2. Adafruit MicroSD Card Breakout Board+ [ADA254]
Feature
Adafruit Part Number: 254Stock Type: Breakout Boards >> Storage
In Stock & Ready to Ship
Description
Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use.
- Onboard 5v->3v regulator provides 150mA for power-hungry cards
- 3v level shifting means you can use this with ease on either 3v or 5v systems
- Uses a proper level shifting chip, not resistors: less problems, and faster read/write access
- Use 3 or 4 digital pins to read and write 2Gb+ of storage!
- Activity LED lights up when the SD card is being read or written
- Four #2 mounting holes
- Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove
- Comes with 0.1" header (unattached) so you can get it on a breadboard or use wires - your choice
- Tested and assembled here at the Adafruit factory
- Works great with Arduino, with tons of example code and wiring diagrams
To use with an Arduino, connect GND to ground, 5V to 5V, CLK to pin 13, DO to pin 12, DI to pin 11, and CS to pin 10. Then you can use the Arduino IDE's SD library which supports FAT and FAT32 SD cards. For details on getting started, check out our detailed tutorial discusses microSD cards, wiring and how to use this breakout board with an Arduino
3. SenMod 5PCS Micro SD Card Micro SDHC Mini TF Card Adapter Reader Module for Arduino
Feature
Level conversion circuit board that can interface level is 5V or 3.3VPower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
Communications interface is a standard SPI interface
4 M2 screws positioning holes for easy installation
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Description
Description:The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver,
SCM system can be completed within a file MicroSD card
Support Micro SD Card, Micro SDHC card (high speed card)
Level conversion circuit board that can interface level is 5V or 3.3V
Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
Communications interface is a standard SPI interface
4 M2 screws positioning holes for easy installation
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply;
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is
also converted to 3.3V, general AVR microcontroller systems can read the signal;
Micro SD card connector: self bomb deck, easy card insertion.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Package Content: 5 pcs Micro SD Card Module
4. WINGONEER 5PCS Micro SD TF card reader module SPI interface with chip level conversion
Feature
Support Micro SD card, Micro SDHC card (high speed card)board level conversion circuit, namely the interface level for 5V or 3.3V
power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
The communication interface is a standard SPI interface
M2 screw positioning holes for easy installation
Description
WINGONEER trademark Reg.NO:4747611Specifications:
The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read
Module features are as follows:
1 Support Micro SD card, Micro SDHC card (high speed card)
2.-board level conversion circuit, namely the interface level for 5V or 3.3V
3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
4.The communication interface is a standard SPI interface
5.4 M2 screw positioning holes for easy installation
Interface Description:
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply;
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal;
Micro SD card connector: self bomb deck, easy card insertion.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination
Size: app.4.4*2.4cm
Package Includes:
5 x Micro SD TF card reader module SPI interface with chip level conversion
5. Virtuabotix SD Card Reader/Writer for Arduino and other Microcontrollers
Feature
Works with all standard SD Cards! (dependent on your library 1 to 2 GB recommended for embedded use much more is just crazy overkill for most applications)Easy to wire to any Microcontroller that has SPI support (or any microcontroller with a programmer willing to write SPI protocol from scratch).
Easy to use examples, and instant compatability with the built in Arduino library
Working Voltage 3.3 & 5V(DC Both required), 7 wires required (including power and ground)
Comes with the Virtuabotix exclusive 100% Satisfaction Guarentee!
Description
Description: This SD Card Reader/Writer is ideal for many Micro-controller projects (Arduino, Pic, Versalino, etc...) Including (but not limited to) projects involving sensor and other data logging activities. Audio playing and/or recording. Video, Image, and other multimedia storage and retrieval for advanced embedded applications.Processing large quantities of data with a robot, or storing/retrieving items larger than the limited memory available on your microprocessor. This can be used for a broad range of applications from scientific data collection for biological/geological and other statistical studies in the field, to storing map data for your robots surroundings in and outside the home. Technical Specifications: Working Voltage : 3.3 & 5V(DC Both required) Requires SPI Capable Microprocessor Size limitations are library dependent, but most microprocessors have libraries pre-coded that will support sizes upward of 1GB 7 wires required (including power and ground) Fits standard size SD Cards Package Contents: SD Card Reader/Writer Pin-out and Instruction Pamphlet Arduino Library Features: Supported by built in library, which provides file reading/writing/deletion/creation Easy to use examples are included with the standard Arduino IDE6. 5PCS Micro SD Card Micro SDHC Mini TF Card Adapter Reader SPI interface driver Module for Arduino
Feature
Level conversion circuit board that can interface level is 5V or 3.3V?Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board?
Communications interface is a standard SPI interface?
4 M2 screws positioning holes for easy installation
Brand new and high quality
Description
Description:The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver,
SCM system can be completed within a file MicroSD card
Support Micro SD Card, Micro SDHC card (high speed card)
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply;
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is
also converted to 3.3V, general AVR microcontroller systems can read the signal;
Micro SD card connector: self bomb deck, easy card insertion.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Package Content: 5 pcs Micro SD Card Module
7. HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
Feature
The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card).
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply.
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Description
Description:The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver,
SCM system can be completed within a file MicroSD card
Support Micro SD Card, Micro SDHC card (high speed card)
Level conversion circuit board that can interface level is 5V or 3.3V
Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
Communications interface is a standard SPI interface
4 M2 screws positioning holes for easy installation
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply;
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal;
Micro SD card connector: self bomb deck, easy card insertion.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Package Included:
5* Micro SD TF Card Adater Reader Module
8. SunFounder SD Card Module Slot Socket Reader for Arduino UNO R3 Mega 2560 Nano
Feature
This SD Card module can make your SD application more easier and simple.It is easily interfaced as a peripheral to your arduino sensor shield module.
Through programming, you can read and write to the SD card using your arduino
Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control
All SD SPI pins output, MOSI, SCK, MISO and CS
Description
1.This SD Card module can make your SD application more easier and simple.2.It is easily interfaced as a peripheral to your arduino sensor shield module.
3.Through programming, you can read and write to the SD card using your arduino.
A.Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control.
B. All SD SPI pins output, MOSI, SCK, MISO and CS.
C. Support 5V/3.3V input
Package Content
1 X SunFounder SD Card Module Slot Socket Reader for Arduino
9. HiLetgo Stackable SD Card and TF Card Shield for Arduino UNO R3 Arduino Mega 2560
Feature
This SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project.Stackable SD Card Shield is a stackable design Arduino SD / TF card expansion board. It supports direct insertion in the Arduino board to extend SD / TF read and write functions.
SD / TF card expansion board uses the Arduino hardware ISP interface, so only supports SIP mode SD / TF card.
This expansion board uses only a handful of Arduino pins, so the stack design allows you to plug in another expansion board on this board, provided that the same SPI pins are not used, such as Bluetooth expansion board, GPRS expansion board.
Many electronic enthusiasts have provided Arduino with a simple documentation program. And we provide a simple TinyFAT file system library, you can easily achieve Arduino control SD / TF card reader - this library only supports FAT16 small capacity card, such as 1G card, if you need to support FAT32, you can use Arduino heard Official library.
Description
Features:Compatible SD card, Micro SD card and SDHC card supportable.Prototype expand Library support
Size: 53mm x 47mm
Weight: 35g
Pin With SD Card 5V
VCC ---3v3
GND--GND
D13---SD_CLK
D12-- SD_OUT
D11---SD_IN
D10--SD_CS
1.The shield is missing pins for SCL and SDA
If you need those two for I2C communication like a display shield, you have to use Analog pin 4 and Analog pin 5
2. How to build an eeprom programmer to program 2708s for computer?
A: Set the switch to "3.3"and pressed on, SD cards require 3.3v or you could damage them.
B:Installed the shield on a Mega 2560 R3 if you need lot of I/O pins forprom programmer,You can plug any shield, in general, into any Arduino as long as you "match" up the pins which are marked.
C: Installed the shield on Mega,put the shield on the Duemilanove, changed the chip select pin to "10" again, and Cardinfo ran. Note that when you compile using the IDE, you have to CHANGE the target board to the board you are using or it just won't work.
D:when you modify the code, make sure that you replace "10" with "53".
3.You can by googling ""SD shield 3.0"" and clicking on the iTEAD wiki link.
A-Put the SD shield on whatever arduino you have. Using the labels on the shield and arduino, make sure the pins match.
B-Use the wiki instructions' "Compatibility" section to find out what position the 3.3V/5V selector switch should be in, and whether you need to remove ALL 3 of the adjacent SPI Jumpers on the top of the board given the arduino board you're using. For the arduino DUE,you can remove these jumpers and keep the switch on 3.3V.
10. Gikfun SD Storage Board TF Card Memory Shield Module For Arduino EK1442
Recent Comments