torque indicator buyer’s guide
We spent many hours on research to finding torque indicator, reading product features, product specifications for this guide. For those of you who wish to the best torque indicator, you should not miss this article. torque indicator coming in a variety of types but also different price range. The following is the top 10 torque indicator by our suggestions:
Best torque indicator
1. ACDelco 1/2 Digital Torque Adapter (4-250 ft-lbs) with Audible Alert ARM602-4A
Feature
Digital Torque AdapterConverts any ratchet wrench into a precision torque wrench; accurate calibration device for existing digital and analog torque wrenchesDigital Torque AdapterThree color LED light indicator and audible sound once torque setting is reaching (4-250-foot pounds wide torque range)
Digital Torque AdapterGuaranteed Accuracy Range: 1.5% clockwise 2.5% CCW of indicated value, CW, from 20% to 100% of full scale - CR2032 Coin sell batteries required to operate the adapter. (Included)
Digital Torque AdapterThe product quality meets or exceeds ASME B107.14-2004, ISO 6789 standards, individually serialized with matching certificate of calibration traceable to N.I.S.T.
Digital Torque Adapter1 Year ACDelco Tools Limited Warranty: One-year limited manufacturer's warranty against defects in materials and workman ship.
Description
Turn your ratchet wrench into a digital torque wrench and tighten your bolts with complete accuracy. The ACDelco ARM602-4A 1/2-inch Digital Torque Adapter features an audible alert that buzzes once you've reach your setting and torques between 4 to 250 ft.-lbs.Features
-With three (3) mode settings
- The little decide operates in both clockwise and counter-clockwise with an LCD display that shows N-m (or kg-cm, in-lb., ft-lb) measurements.
Package includes :
one (1) digital torque adapter
two (2) CR2032 coin cell batteries.
2. Stanley Proto J6280TA100 3/8-Inch Drive Digital Torque and Angle Adapter, 5-99.5-Feet Pound
Feature
Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors and delivers high precision+/-2 (rotating 90 at speed of 30/sec) for angle accuracy
+/-3% clockwise or +/-4% counter clockwise for torque accuracy
LEDs for easy viewing of results and audible beep when desired level is reached
Buzzer and LED indicator for the 9 pre-settable target torques or angles
Description
Stanley J6280TA100 Proto 3/8-inch Drive Digital Torque and Angle Adapter 5-99.5 ft-lbs Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors and delivers high precision. +/-2 (rotating 90 at speed of 30/sec) for angle accuracy. +/-3% clockwise or +/-4% counter clockwise for torque accuracy. LEDs for easy viewing of results and audible beep when desired level is reached. Buzzer and LED indicator for the 9 pre-settable target torques or angles. Five Units Selectable (N.m, ft-lb, in.lb, kg.cm, degree). 50 data memory for recall and joint torque-angle auditing. Auto Sleep after about 2 minutes idle. Both AAA and rechargeable batteries are compatible.3. 1/2"Dr Torque Angle Gauge,Torque Wrench
Feature
1/2" Dr toqure angle wrenchFor the fasteners used on some vehicles, automotive manufactures are specifying both torque and angle settings.
360 degree angle scale- clearly marked in 2 degree increments and in intervals of 10 degree and 30 degrees indicator etched on clear plastic plate.
grease Adjustable arm keeps angle scale stationary. the arm has two lengths for additional flexibility in placement against components.
L type wrench included.
Description
For the fasteners used on some vehicles, automotive manufactures are specifying both torque and angle settings. 360 degree angle scale- clearly marked in 2 degree increments and in intervals of 10 degree and 30 degrees indicator etched on clear plastic plate to protect angle scale from dirt and grease Adjustable arm keeps angle scale stationary. the arm has two lengths for additional flexibility in placement against components.4. Wright Tool 4470 Dial Indicator Torque Wrench, 0 - 175 Foot Pounds
Feature
1/2-Inch driveRubber handle
0-175 foot pound torque range
0-240 nm torque range
Equally accurate in both left and right hand direction
1/2 inch drive
Description
Since 1927, the Wright Tool Company has manufactured top quality hand tools. The use of Wright Alloy Steel, precision heat treating and advanced manufacturing techniques results in products of long life, durability and toughness. All Wright Tool products are designed to meet or exceed the applicable ASME Standards for each particular tool.5. Imperial 73705 Loose Wheel Indicator 33mm - Yellow (Per Package of 10)
Feature
Provides a simple, visual means of confirming proper wheel torque in secondsTemperature-sensitive polymer detects bearing or brake overheating problems by deforming at temperatures above 250F (120C)
Reduce your risk of wheel detachment accidents
Lower your maintenance costs by eliminating unnecessary re-torquing
Decrease equipment downtime
Description
Highlights : Provides a simple, visual means of confirming proper wheel torque in seconds Temperature-sensitive polymer detects bearing or brake overheating problems by deforming at temperatures above 250F (120C) Reduce your risk of wheel detachment accidents Lower your maintenance costs by eliminating unnecessary re-torquing Decrease equipment downtime Facilitates official roadside inspections Clearly visible at night and in bad weather (rain, snow, muddy conditions) Will withstand extreme cold temperatures -100F (-75C) without cracking Easy to install and difficult to tamper with or dislodge Resistant to highway and cleaning chemicals 1-5/16" (33 mm across flats) Color: high-visibility yellow Per Package of 106. Wright Tool 2471 1/4" Drive Dial indicator Torque Wrench 0 - 75
Feature
1/4-Inch driveEqually accurate in both left and right hand direction
Torsion drive design
Large easy to read dial
Follower needle
Description
Since 1927, the Wright Tool Company has manufactured top quality hand tools. The use of Wright Alloy Steel, precision heat treating and advanced manufacturing techniques results in products of long life, durability and toughness. All Wright Tool products are designed to meet or exceed the applicable ASME Standards for each particular tool.7. Wera 05027910001 Kraftform 300 Hex Torque-Indicator Hexagon Screwdriver, 2mm Head, 65mm Blade Length
Feature
Torque -indicator with pre-set and tamperproof torque valueDistinct audible and perceivable excess-load signal when the pre-set torque is reached
Non-adjustable and tamperproof
Description
Wera torque screwdriver with fixed torque for hexagon socket screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Comes with Hex-Plus profile which avoids any rounding of the screw head. The Black Point tip offers high corrosion protection and an exact fit.8. Presa CP31006 Tools Foot Pound Torque Wrench - Beam Style, 1/4", 0-80"
Feature
Accurately tighten and loosen nuts and bolts on your car, truck or garden tractor with this beam style torque wrenchDual in both directions, 0-80 Inch Pounds, 0-9 Newton Meters
This 1/4" drive beam style torque wrench features a graduated indicator tip to eliminate parallax error
A rugged, steel construction with corrosion resistant, mirror=chrome finish makes this a vital tool
Greater gripping capability is provided by a textured black handle
Description
Get the most precise readings every time, and get the job done better. This Presa beam style torque wrench has guaranteed precision. It's ideal for accurately tightening and loosening nuts and bolts for your automobiles, motorcycles, bicycles, and other appliances. This 1/4" drive beam style torque wrench features a graduated indicator tip to eliminate parallax error. The intuitive scale is calibrated in both directions from 0 to 80 inch pounds. The wrench is constructed with a powerful steel alloy and a durable corrosion-resistant mirror-chrome finish with an added textured black handle for the best grip possible. It has a dual scale, which measures 0 to 9 Newton-Meters and/or 0 to 80 inch pounds.9. GaoCold 1/4" 3/8" 1/2" 3/4" Drive Digital Torque Adapter, Led Light Indicator Digital Torque Wrench Adapter (1.5-30nm-1/4")
Feature
Five types of torque unit conversion N. m / Kgf. m / Kgf. cm / Ft. LB / POL. LBPower saving mode design, when not in use, 80 seconds off automatically
Peak / Trace mode, CW: 2%, CCW: 3%, Aarm: LED + Buzzer
Display Range: 1.5-30nm/6.8-135nm/20-200nm/17-340nm/60-600nm/100-1000nm
Description
Description:
Only with a ratchet wrench, immediately become a digital torque wrench display, the same function with digital torque wrench display, this product is fully functional, small portable, cost-effective. widely used in machinery, aviation, railway, maintenance, inspection, etc.
Product characteristics:
1. Peak / Trace mode
2. Five types of torque unit conversion N. m / Kgf. m / Kgf. cm / Ft. LB / POL. LB
3. CW: 2%, CCW: 3%
4. Aarm: LED + Buzzer
5. The low battery warning reminds you
6. Power saving mode design, when not in use, 80 seconds off automatically
7. Battery: 2 AA batteries (not included)
Specifications:
Display Range: 1.5-30nm/6.8-135nm/20-200nm/17-340nm/60-600nm/100-1000nm
Main Color: Black
For detail size as picture shown.
Quantity: 1 Pc
Note:
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Torque Adapter
10. Neiko 20743A Digital Torque Adapter, Drive, 147-750 Foot-Pound, Audible Alert, 3/4"
Feature
Converts any ratchet wrench into a precision torque wrench; accurate calibration device for existing digital and analog torque wrenchesAdapter can calculate torque both metric and SAE units (Ft.-Lb., N-m and kg-m); 3/4-inch drive and socket is compatible with size adapters
Two types of modes: peak mode indicates when a specific level of torque is reached and trace mode actively shows how much torque is being applied on the display
Audible confirmation with 3 LED light indicator and progressive audio notification when reaching specified torque
Range: 150-750 Ft-Lb or 200-1000 N-m; Accuracy: +-2%; Memory: 50; Uses 2 AA batteries
Auto shut off in 80 seconds
Recent Comments