Top sata raid 5 controller for 2022
If you looking for sata raid 5 controller then you are right place. We are searching for the best sata raid 5 controller on the market and analyze these products to provide you the best choice.
Best sata raid 5 controller
1. I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid with Low Profile Bracket SI-PEX40064
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
Description
PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.2. IO Crest 2-port SATA III PCIe 2.0 x2 Controller Card Green, SY-PEX40039
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
ASM1061 Chipset (Asmedia 1061 SATA Host Controller)
Supports Hot Plug and Hot Swap
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps, 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Supports 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Works with SSDs
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Supports Port Multiplier
Description
The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer with SATA ports. Once installed this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device. The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer system.3. I/O CREST 4 Port SATA III PCI-e 2.0 x2 Non RAID Hard Drive Controller Card Marvell 9235 Chipset
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9235
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports Native Command Queue (NCQ)
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x4, x8, and x16 slots
Description
The SI-PEX40062 4 port SATA III PCI-E 2.0 X2 controller card marvel 88SE9235 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.4. IOCrest SATA II 4 x PCI RAID Host Controller Card SY-PCI40010
Feature
Compatible with PCI specificationsSupports Plug & play and hot Plug
Compliant with SATAII Specification Revision 1.1
Compliant with Gen2i, Gen2m SATA II electrical Specification Revision 1.0
Backward compatible with SATA 1.0 Specification
Description
Brings new life to any old desktop PC. Connects up to 4 SATA II High speed SATA hard disk drives. Supports Windows 8 and server 2012.5. Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card
Feature
Adds 10 SATA 6G ports through a Low Profile PCIe 2.0 x2 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required. It is not positioned for performance storage such as multiple SSD drives.PCIe 2.0 x2 Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included. Compliant with PCI Express v2.0 and backward compatible with PCI Express 1.x
Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive. Support Native Command Queuing (NCQ), Hot plug and Hot swap SATA ports
No driver installation is required. The AHCI drivers are natively built-in on Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
Fully RoHS compliant. High quality product. Made in Taiwan.
Description
The Ableconn PEX10-SAT adds 10 SATA 6G ports through a Low Profile PCIe 2.0 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.
Specification
* Connector:
- 10 x SATA (7-pin, DATA) Female
* Chipset: ASMedia ASM1062 + 2x JMicron JMB575
* Data transfer rate:
- Up to 6 GBps
* Software:
- No driver installation required. The AHCI drivers are natively built-in on most Operating Systems
- Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
* 6Gbps SATA III Internal 10 Ports PCIe Gen2 2-lane Host Adapter
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps x2 PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0
* Pin headers on board for activity indication on each channel
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports ATA and ATAPI commands
* Supports SATA Hotplug, and Native Command Queuing (NCQ)
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
*Note: does NOT support SATA Port Multiplier
* BIOS on board supports Windows and Linux OS booting
* Fully RoHS compliant
* Made in Taiwan
Note: the product is not positioned for performance storage such as solid state drives. It's ideal for applications that need a lot of drives, or a huge capacity such as surveillance system, etc.
Package Contents
* Ableconn PEX10-SAT 10-Port SATA 6G PCIe Card
* 1x low profile PCIe bracket
6. Vantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology UGT-ST644R
Feature
4 Channel for Additional Devices. This Card will let You Grow as Your Needs Grow to Add more Devices to your System6 Flex Configurable Port for configuring as Internal SATA or External eSATA Port using simple setting on the Host Card
SATA III 6Gb/s on Every Channel for all your SSDs and HDD. This Offers the Maximum Performance for all your Drives
Port Multiplier Function For Multi-Bay Enclosures to Minimize multiple cable and Maximize Storage, Support both FIS and Command-based Switching
RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your DATA Safe and at the same time Faster Disk Access
More lanes to Prevent bottleneck for All the SATA III drives Moving Data between the Drives and the System Board
Low Profile Bracket Included to Simplify Your Installation into Standard Desktop or SlimLine or Low Profile System
HyperDuo is a Technology Created by Marvell that Encompasses Both SSD and HDD Technologies to give You the Speed Without the Premium Price
Support Windows XP, Server 2003, Server 2008, Vista, 7, 8, 8.1, 10
Description
The UGT-ST644R design encompasses great design and server technology into simple RAID Host controller. It uses the latest storage technology to bring SSD caching storage to the HDD drive to gain unparalleled access speed. This RAID Host controller enables7. Ableconn PEX-SA115 2-Port SATA 6G PCI Express Host Adapter Card - AHCI 6Gbps SATA III PCIe 2.0 Controller Card (Marvell 88SE9128 Chipset) - Support Hardware RAID 0, 1
Feature
Supports SATA III transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0GbpsBuilt with Marvell 88SE9128. Supports Hardware RAID 0 and 1 modes
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.
Description
Add two SATA 6G ports with up to 6 Gbps data rate to your computer.
Specification
* Connector:
- 2 x SATA (7 pin; DATA) Plug
- PCI Express x1 Male
* Chipset: MARVELL 88SE9128
* Software:
- No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
- Drivers are available for Windows XP
* Data transfer rate:
- Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 2 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 5
* 6Gbps SATA III Internal 2 Ports PCIe Gen2 x1 lane host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 5Gbps PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports Non-Raid, Hardware RAID 0, 1 for HDD & SSD
* Supports Non-Raid mode for Optical Drive and Blu-Ray Drive
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Supports one (1) Port Multiplier with FIS-based or Command-based switching
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan
Package Contents
* Ableconn 2-Port SATA 6G AHCI PCI Express Host Adapter Card
* One (1) low profile PCIe bracket
* Quick Installation Guide
Warranty
* Limited One-Year Warranty and Lifetime Product Support
8. QNINE PCI Express SATA 3.0 Controller Card, 2 Port PCIe SATA III 6GB/s Internal Adapter Converter for Desktop PC Support SSD and HDD with Low Profile Bracket
Feature
PCIe to SATA 3.0 2 Port Expansion Card with a low profile BracketOnly can be used to extend the new storage hard disk
Built in 2 SATA3.0 interfaces,Support SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Compatible with Serial ATA Specification 3.0, Compliant with PCIe 2.0 specification
Support Windows XP/Server 2003/Vista/7/8(32/64 bit)/10/MAC/Linux
Description
PCIe to 2 Port SATA3.0 Expansion CardThis PCI-e to 2 SATA3.0 controller card offers simple connectivity between a host computer and SATA 3.0 devices.
9. StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter
Feature
Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slotPCI Express 2.0 SATA Controller with HyperDuo SSD Tiering
4 Port PCI Express SATA III 6Gb
Maximize system capability with SATA III connection speeds
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Description
Add Four Internal SATA III (6Gbps) Ports To A Computer Through A PCI Express x2 Slot
The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds four AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput up to 80% of SSD performance! Note: The HyperDuo automatic storage tiering feature is compatible with Windows XP, Vista, 7, and 8 only.
View larger
View larger
View larger
View larger
The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of seven drives (up to four drives through PM on one port, and a single drive to the remaining three ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support.
Product Features & Applications
- Use SSD tiering to optimize your system for I/O intensive applications such as Office Suites, photo/video editing and media players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability
- Perfect for multi-drive internal RAID storage solutions
- Supports HyperDuo SSD auto-tiering
- Four AHCI SATA III (6Gbps) ports through PCI Express x2
- Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives
- Supports hardware RAID 0, 1, and 1+0 modes configured through BIOS
- Compliant with PCI Express 2.0 standards
- Port Multiplier FIS-based and Command-based switching supported
- Natively supported single chipset design
- Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only)
- Supports Native Command Queuing (NCQ) and ATA/ATAPI commands
- Includes Low Profile/Half-Height installation bracket
- Supports HDDs/SSDs/Optical/Blu-Ray drives
- LED headers for HDD activity LED indicators
10. Syba SD-PEX40104 PCI-Express 8-Port Internal SATA 6Gbps Dual Chipset PCI-E V2.0 x 1 Slot Controller Card
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Connect up to 8 SATA III devices at a time and 8 internal SATA III Ports
DImensions of the product is 6 x 3 x 1 inches
Dual Marvell 88SE9215 + 88sm9705 chipset, software RAID capable
1 -Lane PCI-Express 2.0 interface, up to 6.0Gbps, low-profile bracket included
OS supported: Windows 7, 8, 10, Windows server 2008/R2, 2012/R2, Linux, Mac OSX
Recent Comments