Top alarm lock pg21
If you looking for alarm lock pg21 then you are right place. We are searching for the best alarm lock pg21 on the market and analyze these products to provide you the best choice.
Best alarm lock pg21
1. Alarm Lock PG21MS Pilfergard 95 Decibel Dual Piezo Siren Surface Mount Door Alarm, 9V Battery, Metallic Silver Finish
Feature
Grade 1. Continuous power with the addition of an external power supplyMultiple door monitoring permitted with built-in external reed switches
Status Indicator: The LED will indicate RED when armed
Entry Delay Time Options: include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds
Sleek design for use on standard size and narrow stile doors
Description
Alarm Lock Pilfergard 95 Decibel Dual Piezo Siren Surface Mount Door Alarm, 9V Battery, Metallic Silver Finish2. Alarm Lock PG21MS Narrow Stile Door Alarm
Feature
Accepts 1-1/8" mortise cylinder inside, rim cylinder outside, long tailpiece recommended9V battery included with low alert & flashing LED - 9-1/2" W x 2" H x 2-3/8"
Has programmable 15 sec. entry or delay, comes with two types of tamper proof switches
Audible low battery warning, 3 Programmable 95 db siren styles: sweep, pulsed and steady
Dimensions: 9" W x 2-1/2" H x 2-3/8" D, For exterior key control, optional rim cylinder may be used
Description
Alarm Lock Narrow Stile Door Alarm3. Alarm Lock PG21
Feature
Alarm Lock PG21Description
Alarm Lock PG21 microprocessor-controlled door alarm for4. Alarm Lock PG21 Visual/Audible Narrow-Stile Door Alarm
Feature
Alarm Lock PG21Description
Alarm Lock PG21 microprocessor-controlled door alarm for5. Alarm Lock Pilfergard 95 Decibel Dual Piezo Siren Surface Mount Keypad-Controlled Door Alarm, 9V Battery, Metallic Silver Finish
Feature
Alarm lock is programmable through keypad for 3 digital entry codes, and 3 security levels for secure keyless entryFor use with a mortise leverset (sold separately)
For installation on interior doors
Alarm siren alerts at 95 dB to signal an attempted breach
Stainless steel trim with metallic silver finish resists corrosion
Description
The Alarm Lock Pilfergard surface mount keypad-controlled door alarm supports up to 3 user entry codes of 3 to 5 digits to arm or disarm an alarm siren, is for installation on interior doors, and has a metallic silver finish. The alarm is for use with a mortise leverset (sold separately). The alarm can be manually programmed through the keypad for 3 entry codes (master, management, and passage), and 3 security levels that limit the time the door may be open before the alarm sounds.. The alarm unit and a magnetic sensor align on the door and door frame to detect when the door is opened and activate the siren when armed to signal an attempted breach. The alarm can monitor multiple doors by wiring a series of reed switches (sold separately) to its terminal block. The Piezo electronic sounder can be selected to emit a sweep, steady, or pulsing siren, at low or high volume to 95 decibels. The trim is made of stainless steel with a metallic silver finish to resist corrosion. The alarm can be installed with a remote keypad to provide functions from the opposite side of the door (sold separately). The alarm is powered by a single 9V battery (included), or may be wired for external power through its terminal block.
Specifications
Unique user codes supported | 3 (Master, Management, and Passage) |
Number of digits each code | 3 to 6 |
Security levels | 3 (1, 2, or 3) |
Siren | 95 dB at 10 feet |
Operation | 9V battery or external power |
Dimensions | 9 x 2-1/2 x 2-3/8 inches/22.8 x 6.3 x 6.8 cm (H x W x D) |
Access control keypads for doors limit entry to authorized users. The door remains locked until a recognized code is entered through the numeric keypad and returns to the locked state when the door is closed after passage. Many units include a leverset with a lock mechanism for key override to bypass the keypad. The lock mechanism may be a fixed key cylinder installed by the manufacturer, or it may accept an interchangeable core that can be replaced if security is compromised. A cylindrical lock mechanism requires two bored perpendicular holes in the door for installation, one in the door face and a crossbore hole in the door edge. A mortise lock mechanism fits into a pocket recess in the door edge.
Alarm Lock Systems manufactures mechanical and electronic access controls for secure entry and egress. The company, headquartered in Amityville, NY, meets International Organization for Standardization (ISO) standard 9002.
What's in the Box?
- Alarm Lock Pilfergard door alarm
- Magnetic actuator
- Self-adhesive warning notice
6. Alarm Lock CEM1234526D CEM-12345 Interior Arming/Disarming Mortise Cylinder
Feature
BHMA grade 1 CommercialRequired for interior arming/disarming
Includes 2 keys
Description
Mortise cylinder used with the pilfergard models PG10 and PG21/E to arm and disarm the alarm circuit. Includes two keys.7. Alarm Lock PG30KPD Low-Profile Exterior Keypad for PG30 Alarm
Feature
Flush mount keypadKeypad-controlled Narrow sterile door alarm
Digital codes for Master, management and passage
Recent Comments