Top 9 best arduino buttons and switches for 2022
Finding the best arduino buttons and switches suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best arduino buttons and switches
1. Cylewet 25Pcs 12x12x7.3mm Momentary Tact Tactile Push Button Switch Touch Switch Micro Switch 4 Pins SMD PCB with Cap for Arduino (Pack of 25) CYT1009
Feature
Size of Tact Tactile Push Button Switch: 12x 12x 7.3 mm/ 0.47 0.47 0.29inchesFive colors for caps: Black, Blue, Green, Yellow, Red
Total Number: 25Pcs Push Button Momentary Switches + Caps(5 per each color)
Description
Weight of Tact Tactile Push Button Switch: 0.03ozSize of Tact Tactile Push Button Switch: 12x 12x 7.3 mm/ 0.47 0.47 0.29inches
Five colors for caps: Black, Blue, Green, Yellow, Red
Package Includes:
25Pcs Tact Tactile Push Button Switch
5Pcs Push Button Momentary Switch witch Blue Cap
5Pcs Push Button Momentary Switch witch Red Cap
5Pcs Push Button Momentary Switch witch Green Cap
5Pcs Push Button Momentary Switch witch Yellow Cap
5Pcs Push Button Momentary Switch witch Black Cap
2. Gikfun 12x12x7.3 mm Tact Tactile Push Button Momentary SMD PCB Switch with Cap for Arduino (Pack of 25pcs) AE1027
Feature
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Blue Cap5pcs 12x12x7.3 mm Push Button Momentary Switch witch Red Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Green Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Yellow Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Black Cap
Description
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Blue Cap5pcs 12x12x7.3 mm Push Button Momentary Switch witch Red Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Green Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Yellow Cap
5pcs 12x12x7.3 mm Push Button Momentary Switch witch Black Cap
3. Gikfun 12mm 250V 3A Push Button Switch PBS-11B No Self-Lock ON/OFF Lock for Arduino (Pack of 10pcs) AE1122
Feature
Model: Touch Micro Switch 250V / 3AType: Non-self-locking
Package: 5pcs Red, 5pcs Green
Description
Model: Touch Micro Switch 250V / 3AType: Non-self-locking
Foot width: 3MM
Thickness: 0.5MM
Package: 5pcs Red, 5pcs Green
4. Gikfun 6x6x5mm TACT Switch Push Button For Arduino PCB (Pack of 50pcs) EK1019
Feature
Rated Load DC12V 50mALife 100000 times
50pcs 6 x 6 x 5mm TACT Switch Push Button
Description
50pcs 6x6x5mm TACT Switch Push Button For Arduino AVR ARM PCB5. WINGONEER DIY 5PCS TTP223B Digital Touch Capacitive Sensor Switch Module for Arduino
Feature
Low power consumptionPower supply for 2 ~ 5.5V DC
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
Size:2.4 x 2.4 x 0.7cm(LxWxH)
Description
WINGONEER trademark Reg.NO:4747611Features:
The module is based on a touch-sensing IC TTP223B capacitive touch switch module. In the normal state, the module output low, low power consumption, but when a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.Module can be installed in such as surface plastic, glass of non-metallic materials.You can put to a thin non-metallic paper cover the surface of the module , when touch the correct location of the module , that you can put it hidden in the walls, desktops and other buttons.Low power consumption.Green LED Indicator, and it is bright when power on right.Both positive and negative can be used as a touch surface, and replace the traditional touch of a button.
include
5x WINGONEER TTP223B Digital Touch Capacitive Sensor Switch Module for Arduino
6. Gikfun 50Pcs 6x6x9mm Tact Tactile Push Button Momentary Micro Switch with Cap for Arduino (Pack of 50PCS) EK1852
Feature
10pcs 6x6x9mm Push Button Momentary Switch witch Blue Cap10pcs 6x6x9mm Push Button Momentary Switch witch Red Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Green Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Yellow Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Black Cap
Description
10pcs 6x6x9mm Push Button Momentary Switch witch Blue Cap10pcs 6x6x9mm Push Button Momentary Switch witch Red Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Green Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Yellow Cap
10pcs 6x6x9mm Push Button Momentary Switch witch Black Cap
7. Gikfun 12mm Self-Locking Latching Push Button Switch DIY Kit for Arduino (Pack of 10pcs) EK1920
Feature
Color: red, blue, green, yellow and blackPress the button, power on; press it again, power off
Material: plastic and metal
Package content: 10 x self-locking Latch push button in 5 colors
Description
Package content: 10 x self-locking Latch push button in 5 colorsTips:
Any incorrect soldering operation will make the pins and switches damaged, please pay attention to the following points when operating:
1.Choose the appropriate electric soldering iron, and speed up the welding speed.
2.It is recommended to use 20W electric soldering iron to complete the welding in three seconds.
3.The flux must be the right amount. And try to turn the pins of the switch down when welding.
4.In addition, it would be better to use plug wire with terminal, such as pins with spring, auxiliary plug and try to avoid direct welding.
8. Cylewet 35Pcs 669mm Tactile Tact Push Button Switch Micro Switch Touch Switch with Button Caps of 7 Color for Arduino (Pack of 35) CYT1052
Feature
Dimension of the Switch: 6 6 9mm/ 0.24 0.24 0.35inch7 Color of the Button Caps: black, red, blue, yellow, white, green, gray
Description
Dimension of the Switch: 6 6 9mm/ 0.24 0.24 0.35inch7 Color of the Button Caps: black, red, blue, yellow, white, green, gray
Package Includes:
35 Tactile Tact Push Button Switch Micro Switch
5 Black Button Cap
5 Red Button Cap
5 Blue Button Cap
5 Yellow Button Cap
5 White Button Cap
5 Green Button Cap
5 Gray Button Cap
9. Tactile Switch Panel PCB Mount Momentary TACT Switch Push Button for Arduino 6x6x5mm (Pack of 50 Pcs)
Feature
Great for electronics hobbies & fixing anything that requires a tactile switchThese push buttons have an excellent tactile feel and work well as activation devices for microprocessor devices such as Arduino or the PI
Small little pushbutton works as"Normally open, momentary closed action"
The switches are momentary contact SPST and have a nice tactile/audible click when pressed.They were a perfect fit after straightening the leads to fit the holes in the printed circuit board
These small switches make good contact, snap or click when pressed. The pin placement is perfect for PC boards and bread boards. On bread boards you will need to flatten the legs so they insert properly
Description
Ardess is U.S' first online marketplace exclusively for embedded electronics and robotics components. Ardess caters to the requirements of students, hobbyists, hackers, experts, etc. Choose your favorite product from Arduino, AVR, ARM Development boards, sensors, wireless modules.Product Dimention
Product Name : Tact Switch
Contact Type: Momentary Contact
Dimension: 6 x 6 x 5mm / 4pin
Material: Plastic, Metal, Electric Parts
Color: Black, Silver Tone
Net Weight: 29g
Temperature:-30~+70Centigrade
Withstand Voltage:AC250V
Rated Load:DC12V 50mA
Contact Resistance:=0.03O
Insulation Resistance:=100MO
Product Features
6x6x5mm micro tact switches for connecting electrical circuits.These are great little project board buttons
High precision mechanism design offers acute operation and long service life
Buttons are great for various electronics experimenting / prototypes, household appliances, or more in the field of electronic products
Feature momentary contact, 4 pins, round black push button, through hole mounting, 6 x 6 x 5mm size, etc.
Package included:
100 x Push Button Momentary Tact Tactile Switch 6 x 6 x 5mm DIP-4
Recent Comments