Top 4 best betafpv lite fc: Which is the best one in 2022?

When you want to find betafpv lite fc, you may need to consider between many choices. Finding the best betafpv lite fc is not an easy task. In this post, we create a very short list about top 4 the best betafpv lite fc for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 4 betafpv lite fc:

Best betafpv lite fc

Product	Features	Go to site
	BETAFPV FPV FC Lite Brushed Flight Controller Compatible with Sliverware Firmware	Go to amazon.com
	BETAFPV Beta65S Lite Mini Drone 1S Brushed FPV Whoop Quadcopter with Lite FC Silverware Firmware M01 AIO Camera 7X16 19000KV Motor for Tiny Whoop FPV Racing	Go to amazon.com
	BETAFPV LiteModule RF Module Multiprotocol TX Module for Toy Quadcopters Bayang Protocol Work with Betafpv Lite Flight Controller and Drone	Go to amazon.com
	BETAFPV Beta65S 65mm Whoop Frame Yellow Green for 7x16mm Motors Like Beta65S lite BNF etc	Go to amazon.com

Related posts:

1. BETAFPV FPV FC Lite Brushed Flight Controller Compatible with Sliverware Firmware

Feature

The world's first FC board compatible with Silverware firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
Support level mode and acro mode. Also it has the ability to change settings for custom builds, or to adapt to personal preferences by stick gestures.
Designed to work with current Tiny Whoop or Blade Inductrix frames.Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module. Deviation Compatible : https://www.deviationtx.com/
The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions

Description

Specification:
CPU: STM32F030
Six-Axis: MPU6050
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Silverware firmware
Receiver: Bayang protocol
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 2.5g

Silverware:
Silverware is a firmware for some micro quadcopters, which support level mode and acro mode. So you could use this on whoop FPV racing. Also it has the ability to change settings for custom builds, or to adapt to personal preferences.
By default, Silverware use stick sequences, which also called gestures, to change modes, tune PIDs, calibrate accelerometer or save settings.
Eg, with Frsky QX7 radio transmitter, change the FC's mode between level and acro. Just move the right stick as show below.

Supported radio transmitter:
Currently the built-in receiver is compatible with Bayang protocol. Here is a listing of radio transmitter that could be compatible with this FC board.
BETAFPV TX01 radio transmitter: https://betafpv.com/products/betafpv-t01-radio-transmitter-bayang-protocol
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc, that using the Bayang protocol
Jumper T8SG radio transmitter
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO):https://betafpv.com/collections/rx-tx/products/multiprotocol-mtx90-module
Other 4in1 multiprotocol module that support the Bayang protocol

Package:
1 * BETAFPV Lite brushed flight controller V1.0 ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers

2. BETAFPV Beta65S Lite Mini Drone 1S Brushed FPV Whoop Quadcopter with Lite FC Silverware Firmware M01 AIO Camera 7X16 19000KV Motor for Tiny Whoop FPV Racing

Feature

Supported radio transmitterBETAFPV TX01 radio transmitter; Jumper T8SG radio transmitter; Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol. If not sure whether your radio transmitter could support this FC board, please email us ( [email protected]) for help.
As same as the Beta65S, more punch on throttle wth faster 716 17500KV motors and 4-blade props. BETAFPV Z01 aio 25mW vtx camera with 48 channels in total.
Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviration compatible transmitter module.
Support level mode and acro mode. Also it has the ability to change setting for custom builds, or to adapt to personal preferences by stick gestures.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions

Description

BETAFPV 65S Lite Micro Whoop Quadcopter Silverware Firmware with Lite Brushed Flight Controller

The Beta65S Lite is a new version with BETAFPV Lite brushed flight controller. Powered by silverware, much simple and much affordable. It is ready to fly and the Silverware software does not require switch setting like Betaflight does.

Specification:
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV Lite Brushed Flight Controller
https://www.amazon.com/dp/B07BBN1S62
Motor: 7X16mm 17500KV Brushed Motor
http://www.amazon.com/dp/B074MWWQHD
Receiver: Bayang protocol
Camera and 5.8G Tx AIO 520TVL 1/4 Inch Camera 25mW 40CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Battery: 3.7V 260mah Lipo battery
Flight time: 3 mins

Supported radio transmitter
BETAFPV TX01 radio transmitter
Jumper T8SG radio transmitter
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol.

Note: If you have a Frsky Tanaris QX7/X9D radio transmitter and want to try this FC board, just plug in a MTX90 multiprotocol module and done.
Compatible multiprotocol module:
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO)
Other 4in1 multiprotocol module that support the Bayang protocol

Package Included
1 * Beta65S Lite Mico FPV Quad

3. BETAFPV LiteModule RF Module Multiprotocol TX Module for Toy Quadcopters Bayang Protocol Work with Betafpv Lite Flight Controller and Drone

Feature

LiteModule RF Module works with BETAFPV Lite flight controller and drone. Only Bayang protocol is supported now.
LiteModule RF Module is suitable for many toy quadcopters that use Bayang protocol, Lite Lite whoop drones. You can control RC quadcopters, RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S, Flysky TH9X, Turnigy 9XR/9XR PRO radio transmitter.
Supported radio transmitter: Frsky X9D/X9D Plus/X12S, Flysky TH9X, Turnigy 9XR/9XR PRO.
This Multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X. But JR and TAER remote control channel order is not available now .
Any question or problem please click "BETAFPV Store" and choose "ask a question" to email us!

Description

BETAFPV LiteModule RF Module Multiprotocol TX Module for Toy Quadcopters Bayang Protocol Work with Betafpv Lite Flight Controller and Drone

SPECIFICATION
Item: LiteModule RF Module
Signal frequency: 2400-2483.5Mhz
Controllable range: > 300m
Input voltage: 6V-13.5V
Supported radio transmitter: Frsky X9D/X9D Plus/X12S, Flysky TH9X, Turnigy 9XR/9XR PRO
Supported channel order: AETR
Supported toy: Bayang protocol

BINDING PROCEDURE
Here use the Frsky Taranis X9D Plus for example.
1. Creat a model in OpenTX using external module in PPM mode, 12 channels and AETR sequence order.
2. Turn off Frsky Taranis X9D Plus.
3. Power up the drone. Wait for it in the binding status.
4. Power up. Hold BOTH sticks DOWN and to the LEFT for 3 seconds. The blue LED is flashing slow indicates that the module is in binding status. When bind successfully, the blue LED would be in solid on. Now you could control your drone.
*5. If you re-power your drone, like change the battery, you need to restart the LiteModule to re-do the binding procedure. Hold left stick DOWN and to the RIGHT, right stick DOWN and to the LEFT for 3 seconds to restart the LiteModule.

Note:
This Multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X. But JR and TAER remote control channel order is not available now.

PACKAGE
1 * LiteModule RF Module (Bayang Protocol)
1 * Whip Antenna

4. BETAFPV Beta65S 65mm Whoop Frame Yellow Green for 7x16mm Motors Like Beta65S lite BNF etc

Feature

With 65mm wheelbase distance and 7x16mm motor holder. These motors give this quad more power and more flight time than your regular 6mm Whoop.
The frame is made of the same material as the stock Inductrix, but even lighter and more durable.
Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
This frame works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs.
No need to modify the battery slot. No need to add a foam adapter. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Also you could use the dampers in hte frame.

Description

BETAFPV 2pcs Beta65S Whoop Frame 65mm FPV Frame Yellow Green for 7x16mm Motors like Eachine E011

Specifications:
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Yellow, Green
Propeller: 3-blades 31mm props (Not including)

Package:
1 * Beta65S 65mm Frame Yellow
1 * Beta65S 65mm Frame Green

Conclusion

By our suggestions above, we hope that you can found the best betafpv lite fc for you. Please don't forget to share your experience by comment in this post. Thank you!