Top 10 solar charger regulator 12v

If you looking for solar charger regulator 12v then you are right place. We are searching for the best solar charger regulator 12v on the market and analyze these products to provide you the best choice.

Best solar charger regulator 12v

Product	Features	Go to site
	ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V	Go to amazon.com
	ZEALLIFE Solar Panels Charge Controller, 8A Battery Regulator For 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection	Go to amazon.com
	Sunway Solar Panels Charge Controller Battery Regulator 7A For 12Volt Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection	Go to amazon.com
	Solar Charge Controller 30A, Solar Panel Battery Controller 12V/24V PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Load Timer Setting ON/Off Hours	Go to amazon.com
	Anself Solar Charge Controller Charging Regulator for Solar Panel Battery Overload Protection (11A)	Go to amazon.com
	Sunway Solar Panel Charger Controller Regulator 20A 12V/24V with USB Port, Packed with 5pairs MC4 Connectors Female/Male for Solar Power Battery Charger System Kit	Go to amazon.com
	Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller	Go to amazon.com
	Schumacher SPC-7A 12 Volt Solar Charge Controller	Go to amazon.com
	ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V Auto Paremeter Adjustable PWM LCD Solar Controller Regulator with Load Timer Setting ON/Off Hours	Go to amazon.com
	Solar Charge Controller Waterproof, Y-SOLAR 5A Solar Panel Controller 6V/12V Auto 24Hours Load on IP67 Waterproof Solar Controller for Lead-acid Battery Charging and Discharging Control	Go to amazon.com

Related posts:

1. ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

Feature

PROMOTION for 3 Days, Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge
Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place)
Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc

Description

"Your Satisfaction is our Highest Priority", contact us firstly if you have any question

The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.

Note:
<1>Please keep it in cool and well ventilated place to maintain good heat dissipation
<2>the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.

Features:
--Automatically manage the working of solar panel and battery in solar system.
--Overloading and short-circuit protection.
--Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
--Protection from lightning strike.
--Prolong the battery life cycle and keep the load work well.
--Easy to set up and operate.
--Suitable for small solar energy system.

Specification:
*Voltage: DC 12V/24V
*Self-consuming: 10mA
*Rated Charge Current: 20A
*Rated Load Current: 20A
*Over charge Protection: 14.4V/28.8V
*Over charge Floating charge: 13.7V/27.4V
*Charge recover voltage: 12.6V/25.2V
*Over discharge Protection: 10.7V/21.4V
*Over discharge Recover: 12.6V/25.2V
*USB output: 5V/3A
*Operating temperature: -35?-60?
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in

Package List:
1 * Solar Charge Controller
1 * User's Manual
Warranty: 18-month product guarantee from ALLPOWERS

2. ZEALLIFE Solar Panels Charge Controller, 8A Battery Regulator For 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection

Feature

[ APPLY TO 12V SOLAR PANELS]:The 8A solar controller is used only for 12V solar panels and 12V batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
[THE MAXIMUM INPUT OF SOLAR ENERGY IS 130W]:The maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. It is suitable for 12V rechargeable batteries. In order to lengthen its service life, please do not overload.
[EASY TO MONITOR THE LED INDICATOR LIGHTS]:The solar controller integrates two LED lights, green (fully charged) and yellow (charging). The product also provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection
[QUICK AND EASY CONNECTION]:This solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment. Users don't have to worry about positive (+) and negative (-)
The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.

Description

ZEALLIFE 8-Amp Solar Charge Controller will prevent overcharging of
batteries by regulating the voltage from a 12-volt solar panel to a safe level for charging 12-volt batteries.

A solar charge controller is required for any solar array of 20-Watt or higher.

Designed for use with 12-volt solar panels, this solar charge controller is safe for
use with up to 8-amp or 130-Watt from a solar array.

A simple two LED display shows that the solar panel is functioning and whether your battery is charging or fully charged.

The solar controller will also prevent a battery from losing power through the solar panel at night.

Solar charge controllers should be installed close to the battery in a dry and ventilated area.

Protection:
Over-load protection; Short circuit protection; Lightning protection;
Under-voltage protection; Over-charging protection; Reverse Polarity protection

Specification:
Rated voltage: 12V
Rated charging current: 8A
Rated load current: 8A
Cut-in Voltage:13Volts
Cut-out Voltage:14.2Volts
Adjustable controlling parameter of the system
Suitable for Home, Industrial, Commercial etc

Note:
Never deeply discharge your battery
Never let your battery voltage pass below 11.0 volts
Use a DMM(DIGITAL MULTI-METER) to measure your battery's voltage
Connect charge controller to the battery first and remove last
The charge controller is not waterproof, should be placed in a well ventilated dry area, free from flammable gases and moist

Package List:
1 x Solar Charge Controller
1 x User Manual



Key wordssolar battery voltage regulator charger panel charge controller 12v control panels and controllers for 12 volt 8amp 130 watt automotive maintainer with power waterproof 7amp charging sunforce dc 12volt controler 12vdc

3. Sunway Solar Panels Charge Controller Battery Regulator 7A For 12Volt Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection

Feature

[For 12V DC Systems]-This 7A solar charge Regulator use only for 12 volt DC power systems, solar panels and 12 volt rechargeable battery protection. {IMPORTANT: Always Connect The Battery First and Disconnect Last.} If you need a 12V DC Quick Connect 16FT Extension Cable, please check the ASIN: B06X6LJTD6 .
[Solar Power Input 100W Max.]- Max. input Voltage:22 VDC, Max. Current:7 AMP, solar Panel 100 Watt Maximum. Power Output: 12 VDC Battery. This solar charge regulator works in a better condition when the solar panel is under 80W.
[LED Indicators For Easy Monitoring]-This solar battery controller integrated with 3 LED indicatorsgreen.yellow,and red for low voltage(over discharge protection),charging and high voltage(over charge protection).
[Quick and Easy Connection]-This solar battery charger controller coming with Versatile quick connect clips 2-Way Plug Cable, quick and easy connection to solar panel,battery and load appliance. Users don't worry about the Positive(+) and Negative(-).
Not waterproof.Place the charging regulator at a cool and ventilated place. Avoid contact with water.If you need extension cable, battery clamps,male/female cigarette lighter plug and 12V Adapter for this solar controller solar power system, please check the Asin B06X6LJTD6.

Description

Solar charge regulator is designed to control the charging from solar panel into battery, and the power draw from the battery to outputs. Therefore keep the whole solar system at proper working condition. This solar charge regulator can be best used with our series solar panel with quick connector end.
Technical data:
Operating Temperature :-10 to 42
Humidity:80 %
Max. input Voltage :22V
Max. array current:7A
Over discharge protection:11V +/- 0.3V
Over charge protection:15.5V +/- 0.5V
How to Charge:
Please always connect the battery first.
Connect Solar panel, 12V rechargeable battery, and application (if any) as describe in the image of No.4 .
When solar panel is connected to the solar charge regulator, the charging LED will go on to show that the 12V rechargeable battery is receiving charge from the solar panel
The charge regulator provides following protections for the whole system
Over-discharge protection: When activated, "Low Voltage" indicator will go on, the charge regulator will shut off power output to prevent damage to the battery. In such case, Please stop using any application.
Over-charge protection: When activated, "High Voltage" indicator will go on, the charge regulator will shut off power input from solar panel to battery. Please disconnect solar panel from the charge regulator.
This solar charge regulator can be mounted through its three mounting holes
Caution:
1.Please do not short circuit and/or reverse the polarity of the load, the solar panel, & the battery.
2.Place the charge regulator at a cool and ventilated place. Avoid contact with water.
AFTER EACH USE: Disconnect the Charge Regulator from the battery and solar panels. Always disconnect the battery first.

4. Solar Charge Controller 30A, Solar Panel Battery Controller 12V/24V PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Load Timer Setting ON/Off Hours

Feature

Recently, there are unethical sellers selling counterfeit products! Please be careful ! Don't lose more for two or three dollars! Be sure to look for Y-SOLAR stores when you buy!
The solar regulatoSolar charge Controller with dual USB ports, USB Output: 5V/2A max. 12V/24V auto; Rated Charge & Discharge Current: 30A; Settable operating modes of loads, fully 4-stage PWM charge management.r is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
The solar regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
Mutiple Electric Protection: short-circuit protection,open-circuit protection,reverse protection,over-load protection, more safty for using, suitable for home, industrial, commercial etc.
Easy to install and operate: Solar controller can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc. And has 12-months warranty.

Description

Tips
This product belongs to Y-Solar brand, there are some unreliable follow sellers who sell counterfeit, please be careful.

Features:
12V/24V auto work
LCD screen display
Two USB output
Easy operation interface
PWM charging mode
short-circuit protection
Battery reverse discharge protection
Battery reverse polarity protection
open-circuit protection
Overload protection

Parameters:

1. Floating charge Voltage(HVD 13.3V-15V)
2. Recovery after under Voltage(LVD 11V-13.5V)
3.Under Voltage protection (RVD 9V-12.3V)
4.Load Mode(24hours,1-23hours,0hour)
5.Battery Option (GEL,LEAD-ACID,FLOODED)

Batt voltage: 12V/24V auto
Charge current: 30A
Discharge current: 30A
Max Solar input: <50V
Equalization: B01 sealed 14.4V
B02 Gel 14.2V
B03 flood 14.6V
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
USB output: 5V/3A
Self-consume: <10mA
Operating temperature: -35~+60 degree C

System Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
NOTE: The reverse order applies when deinstalling! An improper sequence order can damage the controller!

Package:

1.1X 30A Solar Charge Contorller
2.1X English User Manual

5. Anself Solar Charge Controller Charging Regulator for Solar Panel Battery Overload Protection (11A)

Feature

Automatically control the solar panel and battery in solar system.
Over-load & short-circuit protection.
Reverse discharging & reverse-polarity protection.
Under-voltage and over-charging protection.
Protection from lightning strike.

Description

The product is used to control solar panel and battery in solar system automatically. It is easy to set up and operate.

Features:
Prolong the battery life cycle and keep the load work well.
Easy to set up and operate.
Suitable for small solar energy system.

Specifications:
Color: Black
Rated Voltage: 12V / 24V (Auto Switch)
Rated Charge Current: 10A / 20A (Optional)
Rated Load Current: 10A / 20A
Stop Power Supply Voltage: 10.8V / 21.6V
Resume Power Supply Voltage: 12.6V / 25.2V
Stop Charging Voltage: 14.4V / 28.8V
Temperature Compensation: -3mV/Cell/C
Operation Temperature: -20C~60C
Item Size: 103 * 95 * 38mm / 4 * 3.74 * 1.5in
Item Weight: 117g / 4.14oz
Package Size: 11.5 * 10 * 5.2cm / 4.5 * 3.94 * 2in
Package Weight: 153g / 5.41oz

Note:
1. Order of Connection: connect storage battery firstly, then connect the solar panel; Order of Disconnection: disconnect the solar panel firstly, then the storage battery; otherwise it will cause damage to the controller.
2. The inverter can't be connected to the controller directly.
3. The controller will generate heat during operation, please notice that put the controller on flat surface with good ventilation.

Configuration Selection:
For 12V System, battery voltage is 12V, recommended input voltage of solar panel: 16-22V, when actual input voltage>50V, controller will be damaged;
For 24V System, battery voltage is 24V, recommended input voltage of solar panel: 32-44V, when actual input voltage>50V, controller will be damaged.

Package List:
1 * Solar Charge Controller
1 * User Manual (English)

6. Sunway Solar Panel Charger Controller Regulator 20A 12V/24V with USB Port, Packed with 5pairs MC4 Connectors Female/Male for Solar Power Battery Charger System Kit

Feature

[FULLY PROTECT YOUR SOLAR SYSTEM]-This solar power battery charge controller provide mutiple electric protection: Overcharge and Over discharge protection, Short-circuit protection, Over-current protection, Overload protection and Voltage low protection, Anti reverse charge protection/Anti reverse connection protection.
{Hard Plastic and Better Heat Dissipation}-This solar panel battery charger controller has Aluminum Backboard, It is better for heat dissipation. and this solar power regulator protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. The solar controller is also covered with hard plastic housing, Durable and Longer life time.
{Easy To Use With LCD Display}-This solar panels controller is 12V/24V(Battery voltage) Automatic self-adaption,PWM charge management. Rated Charge and Discharge Current: 20A. With two USB port and the Output Voltage is 5V/3A for mobile phones and battery power bank. It integrated with a LCD display, make it easier to operate.
[MC4 Compatible with More Solar Cable or PV wires]--The solar mc4 connectors Rated Current: 30A , Rated voltage: 1000VDC, Suitable cable: 2.5mm2, 4mm2, 6mm2(AWG14, AWG12, AWG10).
[Waterproof and Hard Plastic MC4 Connectors]--The mc4 solar connectors has double seal rings for better waterproof. It can be used in harsh environment. The mc4 tool connectors are made of PPO+PA material, with excellent aging resistance and UV endurance.

Description

Solar Controller Specification:
Rated charging current:20A
Rated discharging current: 20A
Max PV voltage:<50V
Float voltage:13.7V(default,adjustable)
Discharge cut-off voltage:10.7V(default,adjustable)
Discharge recovery voltage:12.6V(default,adjustable)
USB Output:5V/3A
Standby current: <10mA
Work temperature:-35-+60

MC4 Connectors Specification:
-Rated Current: 30A
-Rated voltage: 1000VDC
-Suitable cable: 2.5mm2, 4mm2, 6mm2(AWG14, AWG12, AWG10)
-Contact resistance: <0.2mm
-Waterproof degreeIP67
-Safety Class:II
-Pin dimension: 4.0mm dia.
-Insulation material: PPO+PA
-Connecting system: crimping connection
-Contact material: copper, tin plated
-Temperature range: -40 degree ~ +90 degree

Package includes:
-5 Pairs of MC4 Solar Panel Cable Connectors (5 Male&5 Female)
-5 pairs of solar connector copper pins (5 male & 5 female)
-1pcs solar charge controller
-1pcs User Manual(English Version)

Note:
1. Solar Controller should always connect the 12v battery first, and then connect the solar panel ,and finally the load! The disassembly sequence is contrary to the wiring order !
2. Make sure your battery has enough voltage for the controller to recognize the battery before your first installation.
3. The regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
4. Let the children keeps far away from the storage battery and the controller.
5. When switch between different display or to enter/exit setting, please long press(3-5seconds) the first menu button.

7. Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller

Feature

PWM (Pulse Width Modulation) technology with temperature compensation protects battery from over-charging
4-LED Battery charge status LED indicators
Suitable for both sealed and flooded lead-acid batteries & automatic voltage detection, 12 volts only
Maximum 5 amp under load, compatible with Instapark solar panels and many other manufacturers
Includes a plug-n-charge connection cable for the Mercury27 solar charger

Description

The Instapark INCC1205 solar charge controller is designed and engineered to prevent your 12V battery from overcharging when it's connected to a solar panel, therefore protect your investment and extend the battery life. The INCC1205 solar charge controllers is equipped with PWM technology to ensure that your battery reaches its maximum charging capacity without causing any damage to the battery. Similar to other modern high quality battery chargers, PWM algorithm gradually reduces the charging current to avoid over-heating of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time resulting in higher charging efficiency, faster recharging and a healthier battery at its full capacity.

Each INCC1205 charge controller comes with four green LED indicators and one red LED indicator displaying battery status, connection status and real-time battery charge capacity. The INCC1205 solar charge controller is in full conformance with both CE and RoHS standards and is backed up by a standard 2-year manufacturer's warranty.

Specifications:

Rated solar input current: 5A
Rated output charging current: 5A
Charging voltage: 12.8V
Cut-off voltage: 14.6V
Float voltage: 13.8V Temp Comp. (mV/C): -30mV/-60mV
Temperature: -31F to 131F

Package Includes:

Instapark INCC1205 12 volt / 5 amp Solar Charge Controller
Battery Terminal Clamps
5.5mm x 2.1mm female to bare wires (solar panel output) adapter
User manual

8. Schumacher SPC-7A 12 Volt Solar Charge Controller

Feature

For use with 12 Volts solar panels and batteries only
Provides overcharge protection to the battery and optional load connection to manage discharge of the battery
Handles up to 7 ampere of array current and up to 100 watts of solar power
Versatile quick-connect clips make easy connections between 12 Volts rechargeable battery, solar panel and load application
Environmentally safe - no electricity needed

Description

This charge controller offers protection for your 12 Volts lead-acid batteries and solar panels. It protects your battery from overcharge and discharge. For use with 12 Volts solar panels and batteries only, it handles up to 7 ampere of array current and up to 100 watts of solar power.

9. ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V Auto Paremeter Adjustable PWM LCD Solar Controller Regulator with Load Timer Setting ON/Off Hours

Feature

Clear stock, buy ASAP Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge
Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place)
Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc

Description

Change the default setting of solar controller, requires:
1. Disconnect the solar panel
2. ensure the remain voltage of battery no less than 12V

Note:
<1>Please keep it in cool and well ventilated place to maintain good heat dissipation
<2>the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
<4>Indoor use only: the working temperature of this controller is -35C to +60C, during hot sunny days, the temperature outside might go up to 60-75C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation. <5>When the battery voltage is too low, the controller will stop output( 8V, controller turn off itself, LCD is blank, 10.7V, 12Voutput ports are not available); after the solar panels charging, the battery will return to 12.6 V. It is a natural to output.

Warm Tips:
Only voltage reading in the screen of the solar controller, no amps or amp hours.

Specification:
*Voltage: DC 12V/24V
*Self-consuming: 10mA
*Rated Charge Current: 20A
*Rated Load Current: 20A
*Over Charge Protection: 14.4V/28.8V
*Over Charge Floating Charge: 13.7V/27.4V
*Charge Recover Voltage: 12.6V/25.2V
*Over Discharge Protection: 10.7V/21.4V
*Over Discharge Recover: 12.6V/25.2V
*USB Output: 5V/3A
*Operating Temperature: -35-60
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in

Warm Tips: Wire Range 26-10 AWG(4.0mm)

10. Solar Charge Controller Waterproof, Y-SOLAR 5A Solar Panel Controller 6V/12V Auto 24Hours Load on IP67 Waterproof Solar Controller for Lead-acid Battery Charging and Discharging Control

Feature

Mini Size solar controller Waterproof for small power system, IP67 Waterproof Rating make it suit for Outdoor Use
Battery Voltage: 6V/12V auto; Rated Charge & Discharge Current: 5A; Maximum power of solar panel: 30W for 6V battery, or 60W for 12V battery
Easy to install and operate; Load On 24 Hours; Smart PWM technology, high efficiency
Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights
IP67 Waterproof Rating make it suit for Outdoor Use like: Boat, water pump, Control landscape Lights and Water Feature

Description

Notice: New type: 5A solar controller waterproof for 6V or 12V battery, please connect battery first.

Function:
1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.
2. Easy to install and operate, Load On 24 Hours, Smart PWM technology, high efficiency.

Your Satisfaction is our Highest Priority, please kindly contact us via email firstly if you have any question with our this solar panel controller, we will always standby and try our best to help you solve the problem, thank you.

Specifications:
Waterproof IP67
Rated Voltage:DC 6V/12V
Max input VOC: 11V(6V) / 22V(12V)
Max Current:5A
voltage of solar panels: 30W (5A,6V)/60W (5A,12v)
Float:13.8V
Charge reconnect: 6.5V (6V) / 13V (12V)
Discharge stop: 5.6V(6V) / 11.2V(12V)
Discharge reconnect: 6.3V(6V) / 12.6V(12V)
Working Temp:-10- +40degree;
Weight:33g

Package:
1Pcs 5A WATERPROOF Solar Charge Controller

Conclusion

All above are our suggestions for solar charger regulator 12v. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using solar charger regulator 12v with us by comment in this post. Thank you!