Top 10 best robot zumo for 2022
Finding the best robot zumo suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best robot zumo
1. Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors) by Pololu
Feature
This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller.It uses two 75:1 HP micro metal gearmotors to drive the treads, providing plenty of torque and a top speed of approximately 2 feet per second (60 cm/s).
The Zumo robot includes a 0.036"-thick laser-cut stainless steel sumo blade mounted to the front of the chassis for pushing around objects like other robots.
The Zumo robot has a reflectance sensor array mounted along the front edge of the Zumo (behind the sumo blade) allows the Zumo to detect features on the ground in front of it, such as lines for following or edges for avoiding.
Required Accessories (Not Included): Arduino or compatible control board (Arduino Uno, Leonardo, NOT COMPATIBLE with Mega or Due). Four AA batteries (Alkaline or NiMH).
Description
Integrated 75:1 HP micro metal gearmotors that offer a good blend of speed (up to 2 feet per second), power, and control. Mounted array of six IR reflectance sensors that allows the Zumo to detect contrasts in reflectivity directly beneath its blade, which can be used for following lines or detecting edges (e.g. the white outer area of a sumo ring or the edge of a table). Integrated DRV8835 dual motor drivers capable of delivering enough current for the Zumo's two high-power gearmotors. Piezo buzzer for playing simple sounds and music. The buzzer is controlled by one of the Arduino's PWM outputs, so tones can be generated in the background without taking up a lot of processing power.2. Pololu Genuine Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors) (Item: 2510)
Feature
The Zumo robot for Arduino is an Arduino-controllable tracked robot platform that is less than 10cm10cm-small enough to qualify for Mini Sumot measures less than 10cm on each side and weighs approximately 300g with an Arduino Uno and batteries
so it is both small enough and light enough to qualify for Mini-Sumo competitions
Description
The Zumo robot for Arduino is an Arduino-controllable tracked robot platform that is less than 10cm10cm-small enough to qualify for Mini Sumo. It includes two micro metal gearmotors coupled to a pair of silicone tracks, a stainless steel bulldozer-style blade, an array of six infrared reflectance sensors for line following or edge detection, a buzzer for simple sounds and music, a 3-axis accelerometer, magnetometer, and gyro for detecting impacts and tracking orientation. Just add 4 AA batteries and an Arduino (or compatible controller) and you are ready to push! No soldering or assembly is required.
3. Pololu Genuine Zumo Robot Kit for Arduino, v1.2 (No Motors) (Item: 2509)
Feature
consists of aZumo Shield for Arduino, v1.2, aZumo chassis kit, and aZumo bladeYou will also need a pair ofmicro metal gearmotors, fourAA batteries, and anA-Star 32U4 PrimeorArduinoto complete your Zumo robot (motors, batteries, and Arduino sold separately)
Description
This kit contains most of the parts you need to build an Arduino-controlled Zumo robot. It consists of aZumo Shield for Arduino, v1.2, aZumo chassis kit, and aZumo blade. You will also need a pair ofmicro metal gearmotors, fourAA batteries, and anA-Star 32U4 PrimeorArduinoto complete your Zumo robot (motors, batteries, and Arduino sold separately). This product is akit; assembly (including soldering) is required
4. ZUMO CHASSIS KIT NO MOTORS
Description
The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo competitions. The main body is composed of black ABS and features a compartment for four AA batteries and sockets for two micro metal gearmotors. It ships as a kit with two silicone tracks, two drive and two idler sprockets, a 1/16 acrylic mounting plate, and mounting hardware. (Motors and batteries are not included.) The Pololu Zumo chassis kit contains the components necessary to build a small, high-performance tracked robot platform that is compact enough to qualify for Mini Sumo competitions. Each side of the chassis has an idler sprocket that spins freely and a drive sprocket that connects to a micro metal gearmotor (not included). The main body is composed of ABS plastic and has sockets for two micro metal gearmotors and a compartment for four AA batteries (not included). The battery compartment terminals protrude through the chassis and can be accessed from the top side. A black acrylic plate is included with the chassis. This plate holds the motors in place and can be used for mounting your electronics, such as your microcontroller, motor drivers, and sensors.5. Pololu Genuine Zumo 32U4 Robot (Assembled with 50:1 HP Motors) (Item: 3125)
Feature
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCUIt includes two50:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation
The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weighs approximately 275g with batteries
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU. It includes two50:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation. The low-profile robot is less than 10cm10cm-small enough to qualify for Mini Sumo. No soldering or assembly is required; just add 4AA batteriesand aUSB cableand your Zumo is ready for programming.
6. Pololu Genuine Zumo 32U4 Robot (Assembled with 100:1 HP Motors) (Item: 3127)
Feature
It measures less than 10 cm on each side and weighs approximately 275g with batteriesThis version of the Zumo 32U4 robot (item #3127) ships fully assembled
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU. It includes two100:1 HPmicro metal gearmotors along with integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors for detecting objects, and a full IMU for detecting impacts and tracking orientation. The low-profile robot is less than 10cm10cm-small enough to qualify for Mini Sumo. No soldering or assembly is required; just add 4AA batteriesand aUSB cableand your Zumo is ready for programming.
7. Pololu Genuine Zumo 32U4 Robot Kit (No Motors) (Item: 3124)
Feature
The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot.It measures less than 10 cm on each side and weighs approximately 275g with batteries (170g without), so it is both small enough and light enough to qualify for Mini-Sumo competitions
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU, and this kit contains most of the parts you need to build one-all you need to add are a pair ofmicro metal gearmotorsand fourAA batteries. It includes integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors, and a full IMU. The assembled robot is less than 10cm10cm-small enough to qualify for Mini Sumo.This product is a kit; assembly (including soldering) is required.8. 4WD Robot Chassis Kit with 4 TT Motor for Arduino/Raspberry Pi
Feature
Smart 4WD robot car chassis with 4 TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 12V.DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM).
Robot chassis kit made of PCB material, Size:256*150*2MM, Maximum Load 500g.
With many circuit mounting holes, users can add some micro-controller (such as Arduino/Raspberry Pi) and sensor modules to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
This 4WD robot car chassis convenient installation, firm and reliable.
9. Zumo 32U4 Robot Kit (No Motors)
Feature
Zumo Chassis KitZumo 32U4 Main Board (this includes two magnetic encoder discs that work with encoder sensors integrated into the main board and a through-hole buzzer)
Zumo 32U4 Front Sensor Array
Stainless steel Zumo 32U4 Blade and plastic IR LED holder
82 character LCD
Description
The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU, and this kit contains most of the parts you need to build one-all you need to add are a pair of micro metal gearmotors and four AA batteries. It includes integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors, and a full IMU. The assembled robot is less than 10 cm 10 cm-small enough to qualify for Mini Sumo. This product is a kit; assembly (including soldering) is required.The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weighs approximately 275 g with batteries (170 g without), so it is both small enough and light enough to qualify for Mini-Sumo competitions, but its versatility makes it capable of much more than just robot sumo battles.
10. Zumo Robot winning Mini Sumo Robot Body for Arduino Compatible Microcontroller
Feature
At up to 2 feet per second, this Zumo Robot is fast! With powerful 75:1 HP micro metal gearbox motors, high traction silicon tank-like tracks and a bulldozer-style blade, this tiny bot has the big muscle to push competitors out of the way!The Zumo Robot includes powerful micro metal motors to help you win at Mini Sumo. There are six infrared reflectance sensors to perform line and edge detection, a triple access accelerometer to detect collisions and a compass to assist with navigation.
The Zumo Robot is a robot body that attaches to an Arduino or compatible microcontroller to create a full Mini Sumo compliant robot. It attaches to your favorite Arduino just like a shield.
Recent Comments