Top 10 best optical rca audio cable
Finding the best optical rca audio cable suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best optical rca audio cable
1. AutoWT Digital Coaxial Toslink Adapter with Optical Cable, 3.5mm Audio Cable and USB Power Cable
Feature
Converts coaxial or optical digital audio input to analog stereo output over RCAProvides electromagnetic-noise-free transmission
Easy to install and simple to operate
Supports sampling rate at 32, 44.1, 48 and 96 KHz, up to 24-bit resolution
Converts coaxial or toslink digital audio signals to analog L/R audio and connects to an external device such as an amplifier via standard RCA jacks
This item does not work with Netflix
Description
Important Notice:1. Please close Dolby digital of your device or turn to LPCM or other audio format when convert digital to analog, since most of new generation devices with Dolby or set Dolby as default audio output.
2. Please increase the audio source's speaker level after converted.
Package Included:
1 x Digital to Analog Audio Converter Adapter
1 x USB Power Cable
1 x 3.5mm Audio Cable
1 x 1M Fiber Optical Cable
1 x User Manual
Features:
1. This Digital to Analog Audio Converter is designed for either home or professional audio switching.
2. It converts Coaxial or Toslink digital audio signals to analog L/R audio.
3. This Converter has many features that enable it to perform in a superior manner.
4. Converts Coaxial or Toslink digital audio signals to analog L/R audio
5. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
6. 24-bit S/PDIF incoming bit stream on left and right channels
7. Provides electromagnetic-noise-free transmission.
8. Easy to install and simple to operate.
9. Note:
A. The Reason of cancel the external power adapter and use USB powered.
Many devices (e.g. Computer TV DVD) USB ports output stable voltage and current, And filters some bad waves. So the DAC(Digital to Analog audio converter) will work better
B. In addition, Use USB output power that is more environmentally friendly, And reduce costs, And compatible with all country
Specifications:
1. Input Audio: Coaxial or Toslink digital audio
2. Output Audio: L/R audio
3. Input audio connector: Toslink, 1 x RCA(Coaxial)
4. Output audio connector: 2 x RCA(R/L)
5. Sampling rate: 32, 44.1, 48 and 96 KHz
6. Operating temperature: 0 to + 70
7. Operating humidity: 10%~85%RH(no condensation)
8. External power supply: 5V DC/1A
9. Power consumption: 0.5W
Please kindly Note: This item NOT convert Dolby.
2. eSynic DAC Digital to Analog Audio Converter Digital Optical SPDIF Coaxial to Analog L/R RCA Converter Toslink to 3.5mm Jack Audio Adapter with 1m Optical Cable for HDTV Blu Ray HD DVD Apple TV
Feature
DAC Converter with 3.5mm Jack and RCA -- The Adapter Output RCA L/R and 3.5mm Jack Simultaneously, You can Play Music and Share at the Same Time; Glad Idea for Your Bluetooth Headphone/Speaker with Your TV.High-grade Aluminum Alloy Design -- Overall Shielding without Signal Interference, Gold Plated Sockets, Enhance HD Sound Signals over Long Distance Broadcasting Smoothly.
Supports Mainstream Digital Optical/Coaxial Input -- Provides Electromagnetic-noise-free Transmission, Sampling Rate at 32, 44.1, 48, and 96 KHz, 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels.
Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output -- This DAC Adapter Only Support 2.1 Channel, Not for 5.1 Channel, Please Set The Audio Output to PCM or LPCM.
Plug and Play -- No Need to Install Drivers, Easy to Install and Operate; Also, Compact Size, Easy to Carry, Ideal for Home or Professional Audio Switching. ( Comes with 18 Months Warranty )
Description
Overview:This digital to analog audio converter is designed for either house or professional audio switching.
Connect to TV with a Toslink cable (also called Digital SPDIF or Optical Cable) or Coaxial cable.
Connect to amplifier with a RCA Audio cable or headphone with a 3.5mm Stereo Jack cable simultaneously
It also can be used for PS3 XBox Blu Ray Player, HD DVD, etc. which have no RCA(L/R) outputs or 3.5mm Jack output
This Converter is small in size and quite easy to install.
Features:
Converts Coaxial or Toslink Digital Audio Signals to Analog L/R RCA & 3.5mm Jack Audio Simultaneously (Not Support Reversed)
Support Connect to an amplifier via standard RCA jacks or a headphone via 3.5mm jack cable
Supports uncompressed 2-channel LPCM digital audio signal output
Supports sampling rate at 32KHz, 44.1KHz, 48KHz and 96KHz
24-bit SPDIF incoming bit stream on left and right channels
Provides electromagnetic-noise-free transmission
Certificated by FCC ROHS
Specifications:
Color: Black
Weight: approx 90g
Dimension: 73 x 55 x 22 mm
Consumption: 0.5W (Max)
Converter Unit: FCC, CE, UL
Power Supply: UL, CE, FCC
Powered by 5.5mm USB Power Cable(Power Adapter is Not Included)
Input Audio Connector: Toslink, RCA (Coaxial)
Output Audio Connector: RCA(R/L), 3.5mm Jack
Package List:
1 x Digital to Analog Audio Converter
1 x Toslink Cable (Optical cable)
1 x USB Power Cable (Power Adapter is Not Included)
1 x User Manual
Note: The SPDIF input must be Stereo PCM, please configure the output of your device. It won't work with Dolby 5.1.
3. Optical to RCA, Digital to Analog Audio Converter, Optical to Analog Converter with Remote, DAC Converter Support 192KHz/24bit with IR Remote Control, Optical Cable and Power Adapter (Silver)
Feature
Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA audio ( NOT capable of being reversed)Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz; 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels, Support speakers and headphones play simultaneously. Make sure your TV audio OUTPUT setting is changed from TV speaker to "External Speaker" or "External Speaker(optical)
Support REMOTE Control: With IR wireless remote control, easily adjust volume/ choose coaxial or toslink input/ Mute/Power ON or OFF by using the IR wireless remote, no need to leave the comfortable couch; In order to received signal better PLEASE make sure the remote is FACING the infrared IR indicator on the converter.
Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output; (5.1 channel is incompatible, Some TV may have PCM / LPCM as the default setting. If not, please set the PCM or LPCM setting as below: Setting--sound--audio format.), Not Support Dolby, DTS, or other surround sound signals
Provides Electromagnetic-noise-free Transmission, The Digital to Analog Adapter Compatible with PS3, PS4, Xbox one, HD DVD, Sky HD, Plasma, Blu-ray, Home Cinema Systems, AV Amps, Apple TV, etc.
Description
If you get no audio, Please note:1. Please make sure the dinger DCA converter's sound volume to maximum
2. Please set your tv's audio out as "toslink" format
3. Please choose the dinger DCA converter's input as "toslink"
4.Check all the cables are well connected, and make sure they are well condition, or please try a high quality optical cable
Please NOTE:
1. SET tv's Audio Output to the PCM/LPCM Format.
2. This converter doesn't Support 5.1 Channel Such As Dolby and DTS.
3. PS4 Pro and PS4 Slim CANNOT use this converter as they haven't Optical fiber output interface.
4. For Samsung TV, if there is no sound even you set the audio output to the PCM/LPCM format, please turn ON the TV external speakers (Menus-Sounds- Speaker Setup- HESB/external speaker-ON)
Digital to Analog Converter
The Digital to Analog Audio Converter is converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device. It designed for either home or professional audio switching.
This Digital to Analog Converter with IR wireless remote control, easily adjust volume/ choose coaxial or toslink input/ Mute/Power ON or OFF by using the IR wireless remote, no need to leave the comfortable couch.
Specification
Dimension: 2.16" x 1.37" x 0.75"
Weight: 200g
AC: 100V-240V, Output: DC 5V/1A
Support Audio Format: PCM
Input Audio: Coaxial or Toslink digital audio
Output Audio: L/R audio
Accurate convert digital audio to analog stereo audio
Support sample rates include 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz
Support SPDIF incoming signal up to 24-bit
Package Contain
1 x Digital to Analog Converter
1 x Remote Control
1 x AC Adapter
1 x USB Cable
1 x Optical Cable
1 x User Manual
4. Musou Digital Optical Coax to Analog RCA Audio Converter Adapter with Fiber Cable
Feature
Converts Coaxial or Toslink digital audio signals to analog L/R audioSupports sampling rate at 32, 44.1, 48 and 96 KHz
24-bit S/PDIF incoming bit stream on left and right channels
Easy to install and simple to operate
Provides electromagnetic-noise-free transmission
Description
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install. Specifications - Input Audio:Coaxial or Toslink digital audio - Output Audio:L/R audio - Input audio connector:Toslink+1XRCA(Coaxial) - Output audio connector:2xRCA R/L) - Sampling rate:32, 44.1, 48 and 96 KHz NOTE:When connected to the Toslink and Coaxial cables at the same, the product will give priority to Toslink input This converter doesn't support Dolby Digital Package Includes - Main unit (Digital to Analog Audio Converter) - 5V/DC POWER SUPPLY - USER'S Manual - 1xOptical Cable Warranty:1 year limited5. Neoteck DAC Converter Digital SPDIF Coaxial Toslink to Analog Stereo L/R RCA 3.5mm Jack Audio Converter Adapter with Optical Cable for PS3 XBox HD DVD PS4 Sky HD Plasma Blu-ray Home Cinema Systems
Feature
Aluminum Metal DAC ConverterAll New Look with Aluminum Metal Shell, Lightweight and Durable Use, It Converts Digital Optical Coaxial or Toslink to Analog RCA L/R Audio and 3.5mm Jack Audio, Supporting Simultaneously Connecting with RCA Jacks Amplifier and 3.5mm Jack HeadphoneGold Plated Jack InterfaceGold Plated Jack Plug, Reduce Interference, Electromagnetic-Noise-Free Transmission and 24Bit S/PDIF Incoming Bit Stream on Left and Right Channels Make the Sound Stereo, Pure and Clear
Powere SourcePowered by 5.5mm USB Power Cable (Power Adapter is NOT Included), Do Not Use Other Plugs, It Can Only Use 5V 1A Plug
Plug and PlayEasy to Install and Simple to Operate, Greatly Compatible with PS3 XBox HD DVD PS4 Sky HD Plasma Blu-ray Home Cinema Systems AV Amps Apple TV(If You Also Need An Optical Cable, Please Search Asin: B0721W2X5Z)
Uncompressed 2CH Audio Output SupportedIt Supports Uncompressed 2-Channel PCM or LPCM Digital Audio Signal Output, Sampling Rate at 32, 44.1, 48 and 96 KHz as Well (NOTE: It is Incompatible with 5.1 Channel Signal Such as Dolby AC3, Please Set the Audio Output to PCM or LPCM before Using)
Description
All Neoteck Product Comes With 18 Months US Base Warranty Overview:
This DAC Converter Converts Coaxial or Toslink Digital PCM Audio Signals to Analog L/R RCA and 3.5mm Jack Audio, Being Compatible with PS3, XBox, Blue-ray Player, HD DVD, etc.
Features:
Converts Coaxial or Toslink Digital PCM Audio Signals to Analog L/R RCA and 3.5mm Jack Audio Simultaneously ( NOT Capable of Being Reversed)
Available for Connection to an External Device such as an Amplifier via Standard RCA Jacks or a Headphone via 3.5mm Jack Cable
Supports Uncompressed 2-channel PCM or LPCM Digital Audio Signal Output
Supports Sampling Rate at32KHz, 44.1KHz, 48KHz and 96KHz
24-bitS/ PDIF Incoming Bit Stream on Left and Right Channels
Provides Electromagnetic-Noise-Free Transmission
Easy to Install and Simple to Operate
Compact Size and Easy to Carry
Certificated by FCC ROHS
Specifications:
Input Audio: Coaxial or Toslink Digital Audio
Output Audio: L/R RCA Audio, 3.5mm Jack Stereo Audio(3.5mm Jack Audio Cable is Not Included)
Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial)(Free Thick Optical Cable Included)
Output Audio Connector: 2 x RCA(R/L),1 x 3.5mm Jack
Power Supply: 5.5mm USB Power Cable
Consumption: 0.5W (max)
Dimension: 70 x 55 x 18 mm
Package Included:
1 x Digital to Analog Audio Converter
1 x Toslink Cable (Optical Cable)
1 x USB Power Cable
1 x User Manual
NOTE:
It is Incompatible with 5.1 Channel Signal Such as Dolby AC3, Please Set the Audio Output to PCM or LPCM before Using
6. Audio Converter, Amanka Digital to Analog Audio Decoder with Digital Optical Toslink and Coaxial Inputs to Analog RCA and AUX 3.5mm (Headphone) Outputs Fiber Cable Included
Feature
DAC Audio converter- Easy to Install and Simple to Operate; Can be Used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc ( not capable of being reversed)Converter output analog audio,Please turn off the Dolby sound, Input signal source such as TV etc, need to set the audio format: PCM; 1M Fiber Optical Cable. Make sure you have to remove the Clear Protector Caps from the Optical Cable
Provides Electromagnetic-noise-free Transmission;Overall Shielding without Signal Interference, Gold Plated Sockets; (5.1 channel is incompatible, Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output
Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz; 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels
Inner special IC unit of amplify analog audio signal to ensure strong and steady signal out; Ultra low jitter and high fidelity design using new receiver & D/A converter chip
Description
Features:This Digital to Analog Audio Converter is designed for either home or professional audio switching.
It converts Coaxial or Toslink digital audio signals to analog L/R audio or 3.5mm audio Jack and available for connection to an external device
such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.
Connection and operation
Before installation, please make sure all devices you wish to connect have been turned off.
Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.
Connect the A/V Receivers or Amplifiers to the Converter using appropriate L/R cable
Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.
Input audio connector: Toslink, 1 x RCA(Coaxial) Output audio connector: 2 x RCA(R/L) +3.5mm Jack
Provides electromagnetic-noise-free transmission.
Easy to Install, No driver, plug-n-play.Full Metal lightweight body,
Important Notice:
1. To avoid static, please close Dolby digital of your device or turn to LPCM or other audio format when use this item to convert digital to analog,
since most of new generation devices with Dolby or set Dolby as default audio output.
2. There will be reduction in the volume after convert, please increase the audio source's speaker level.(some devices only)
3. Please Power Supply and make the indicator light up.
Package Included:
1 x Digital to Analog +3.5mm Jack Audio Converter Adapter
1 x USB Power Cable
1 x 1M Fiber Optical Cable.
Make sure you have to remove the Clear Protector Caps from the Optical Cable.
1 x User Manual
7. Avantree DAC Digital to Analog Audio Converter with Toslink Optical Cable, Volume Control, 192KHz, SPDIF to Stereo L/R RCA 3.5mm Adapter for PS4 PS3 Xbox HD DVD Home Cinema Systems AV Amps Apple TV
Feature
DIGITAL TO ANALOG AUDIO CONVERTER: Converts Optical / Coaxial Toslink digital Pulse Code Modification (PCM) and Line Pulse Code Modification (LPVM) audio signals to Analog (RCA and AUX 3.5mm Jack) audio simultaneously.WIDE COMPATIBILITY: Now easily bridge your legacy sound system with a whole array of digital sources. The DAC02 works perfectly with HDTVs, Satellite receivers, Blu-ray/HD DVD players, Home Theatre systems, AV amplifiers, Sky HD plasma, Apple TVs - pretty muchall devices with optical or coaxial digital audio output port. What's more, you can also use it for your gaming devices such as PS3, PS4 and Xbox.
VOLUME CONTROL DESIGN: This device comes with its own professional volume control knob, which makes it super easy to adjust the output volume of both RCA and AUX. This supports the simultaneous play of both the speakers and headphones. NOTE: This is a Digital to Analog converter only and cannot be used as an audio amplifier.
SUPPORTS ALL POPULAR SAMPLE RATES: DAC02 accepts uncompressed digital audio as input with 192kHz/ 24bit, 96kHz, 48kHz, 44.1kHz, 32kHz as sample rates and provides electromagnetic-noise-free transmission. It supports uncompressed 2-channel LPCM or PCM Digital audio signal output.
SIMPLE TO OPERATE: You can easily switch coaxial or optical input with the press of a button. The device comes with a power toggle switch making power controlling a breeze. And as always with our products, purchase with confidence as Avantree DAC02 comes with a 24-month warranty.
Description
The Avantree DAC02 converts coaxial or optical digital audio input to analog stereo output with high performance.It can support Digital TV, CD, DVD, Blue-Ray, Game console.
NOTE: The DAC02 only supports PCM/LPCM audio signals and does not support Dolby, DTS, or other surround sound signals. Therefore, it is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output. Otherwise the sound output will be noisy/static.Some TV may have PCM / LPCM as the default setting. If not, please set the PCM or LPCM setting as below: System setting--sound--audio--sound format.
Specifications
* Charging voltage /currency: 5V/1A
* Sampling rate: 192kHz/ 24bit, 96kHz, 48kHz, 44.1kHz, 32kHz
* Dimensions (mm): 88(L)x60(W)x23(H)
* Weight: 80g
What's in the box?
* Digital to analog converter
* USB charging cable
* 1m Optical cable
* Quick user guide
Warranty
We offer 24 Months Warranty for normal use. Live online support, Telephone Support, and email support are available. Video user guide are available also from Avantree site.
Support
Any issues or suggestions, contact us via our US toll free No, Intl number, OR email us and 1 business day reply is guaranteed. We are committed to 100% customer satisfaction.
8. LiNKFOR Digital to Analog Audio Converter DAC Converter Digital Optical SPDIF Toslink Coaxial to Analog RCA L/R 3.5mm Jack Stereo Audio Adapter Converter with Optical Cable for HDTV PS3 PS4 TV Box
Feature
DAC Converter It Converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio and Available for Connection to an External Device (NOTE: It is Incompatible with 5.1 Channel Signal Such as Dolby AC3, DTS, Please Set the output Audio mode of the device to PCM or LPCM before Using)Supports Mainstream Digital Optical/Coaxial Input Sampling Rate at 32, 44.1, 48, and 96 KHz, 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels
Multi-Point Connection The Adapter Output RCA L/R and 3.5mm Jack Simultaneously, You can Play Music and Share at the Same Time
High-grade Aluminum Alloy Design Overall Shielding without Signal Interference, Gold Plated Sockets, Ensure high-quality audio signal to send
Plug and Play No Need to Install Drivers, Easy to Install and Operate; Also, Compact Size, Easy to Carry, Ideal for Home or Professional Audio Switching.Warranty,Every LiNKFOR Product will be Backed with 18-month-warranty and Lifetime Customer Support
Description
Overview:
It converts Coaxial or Toslink digital audio signals to analog L/R RCA and 3.5mm Jack audio.
It also can be used for PS3, XBox, Blue-ray player, HD DVD, etc. which have no RCA(L/R) outputs or 3.5mm Jack output.
Feature:
Available for connection to an external device such as an amplifier via standard RCA jacks or a headphone via 3.5mm jack cable
Support sampling rate at 32,44.1,48 and 96KHz
Provide electromagnetic-noise-free transmission
Specification:
Color: Black
Housing: Full Metal
Input audio connector: 1 x Toslink,1 x RCA (Coaxial)
Output audio connector: 2 x RCA(R/L), 1 x 3.5mm Jack
Dimension: 48 x 48 x 20 mm
Weight: 72g
Package Included:
1 x DA converter with 3.5mm jack
1 x Toslink cable (Optical cable)
1 x USB Power Cable
1 x User Manual
Notice:
1. This DAC supports digital PCM or LPCM audio format, Please kindly set your digital audio device such as TV, TV BOX, or game console into PCM or LPCM audio before using, NOT support DTS ,Dolby AC3. Setting PathDevice Homepage -- System Setting -- Image and Sound -- Voice Setting -- Digital Audio Output -- PCM/LPCM.
2. If there is still no sound even after your TV is set to PCM/ LPCM Audio Format, please turn on the external speakers of your TV (It may happen to Samsung TV etc), or test the DAC by connecting PS3, Xbox. Setting Path:Menu -- Sound -- Speaker Settings -- External Speakers -- ON.
3. If the volume (from DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
Warranty,Every LiNKFOR Product will be Backed with 18-month-warranty and Lifetime Customer Support
9. Goronya Digital Optical Coax to Analog RCA Audio Converter and 3.5mm (Headphone) Outpouts, 24-bit DAC with DC 5V Power Supply Adapter and Optical Cable
Feature
Converts SPDIF Optical or Coaxial digital PCM audio input to analog stereo L/R RCA and 3.5mm headphone outputs simultaneouslyInput Audio Connector: 1 x Toslink, 1 x RCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack; Powered by 5.5mm USB Power Cable (Power Adapter is Included)
Supports sampling rate at 32kHZ, 44.1kHZ, 48kHZ, 96KHz and 192kHz, up to 24-bit resolution
Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output; Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM
Plug and play. DC 5V power adapter included. 18 Months Warranty and 7x24 hours service by Goronya
Description
Introduction:This Goronya Digital Audio to Analog Audio Converter is designed for either home or professional audio converting.
It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device
such as an amplifier via standard RCA-style jacks.
This Digital Audio to Analog Audio Converter is small in size and quite easy to install.
NOTE: The Goronya DA converter only supports PCM audio signals and does not support Dolby, DTS, or other surround sound signals.
Therefore, it is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output.
Otherwise the sound output will be noise/static.
Specifications:
-Converts Coaxial or Toslink digital audio signals to analog L/R audio
-Toslink+Coaxial input audio
-2channel standard stereo RCA output. DOES NOT support 5.1 channel
-Input Audio: Coaxial or Toslink digital audio
-Output Audio: L/R audio
-Full metal body, lightweight size, portable and easy to carry and operate
-Power Supply: DC5V, 1A.
-Size(L-W-H): 51X41X26mm
-Net Weight: 85g
Package Included:
-1 x Digital to Analog Audio Converter
-1 x 5V DC US Power Adapter
-1 x User Manual
10. Easycel Audio Digital to Analog Converter DAC with 3.5mm Jack, Optical SPDIF Toslink Coaxial to Analog Stereo L/R Converter with Optical Cable and Power Adapter for PS3 PS4 Xbox Roku
Feature
Converts coaxial or toslink digital PCM/LPCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( NOTEnot capable of being reversed). Ultra low jitter and high fidelity design using new receiver & D/A converter chip.Input Audio Connector: 1xToslink,1xRCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1x3.5mm Jack; Powered by 5V/1A Power Adapter.(NOTE: Do Not Use Other Plugs, It Can Only Use 5V/1A Plug)
Supports sample rates including 32KHz, 44.1KHz, 48KHz and 96KHz; 24-bit SPDIF Incoming Bit Stream on Left and Right Channels.(NOTE: Do not support 192kHz sample rate audio)
Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.(NOTE: 5.1 channel is incompatible, please set your DVD or player audio output to PCM or LPCM, Convert and transfer audio signal only, do not support audio decode
Easy to Install and Simple to Operate; Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc.
Description
Note:1.Do Not Use Other Plugs,It Can Only Use 5V/1A Plug.
2.Please don't forget to set the audio output to PCM or LPCM as it is not compatible with 5.1 Channel Signal.
3.This DAC may have some compatibility problem with Youtube or Netflix.
4.If you are using TV as the audio resource, please do not forget to set your TV audio output to PCM/LPCM(Steps: Device homepage--system setting--image and sound---voice setting--digital audio output--PCM/LPCM).
5.If you are using Panasonic TV as audio resource, please set TV audio output to SPDIF output.
6.If you are using Samsung TV as speakers, please turn on its external speakers(Steps: menu - sound - speaker settings - external speakers - on).
Product description:
Easycel Digital to Analog Audio Converter converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio.
Features:
1.Available for connection to an external device such as an amplifier via standard RCA jacks or a headphone via 3.5mm jack cable.
2.Supports uncompressed 2-channel LPCM digital audio signal input.
3.Supports sampling rate at 32KHz, 44.1KHz, 48KHz and 96KHz(Do Not support 192kHz).
4.24-bitS/ PDIF incoming bit stream on left and right channels.
5.Provides electromagnetic-noise-free transmission.
Specifications:
1.Housing: Full Metal
2.Weight: 90g
3.Input audio connector: 1 x Toslink, 1 x RCA (Coaxial)
4.Output audio connector: 2 x RCA(R/L), 1 x 3.5mm Jack
5.Powered by 5V/1A power adapter
6.Consumption: 0.5W (max)
7.Dimension: 75 x 55 x 22mm
Package List:
1* Easycel digital to analog audio converter
1* Toslink cable (Optical cable)
1* 5V/1A power adapter
1* User manual
Warranty:
This Easycel Digital to Analog Audio Converter Provides one-year Warranty.
Recent Comments