Top 10 best chop saw track 2022
Finding the best chop saw track suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best chop saw track
1. Woodhaven 4507 Chop Saw 48" Pro Kit
Feature
For shop use on a permanent chop saw setup. Our 4507 Pro Kit will make your chop saw a better tool. The Ultra Track forms the fence and is a full 3/4 thick by 3" high. Our Curved Stop attaches to the top of the Ultra Track fence and flips up when not needed or lifts out of the way when a board up to 7/8" thick is pushed against it. Two 48" Ultra Track fences mount to a table (you supply) on either side of the chop saw, flush with your chop saws fence.Includes two 48" Ultra Tracks and four mounting brackets, two 12' Measuring Tapes, Curved Stop, Straight Stop and Stop Extension Arm. Need different Ultra Track lengths? Contact us with your specific requirements for a quote.
Lifetime guarantee against defects in material or workmanship. Made in the USA!
Description
Woodhaven 4507 Chop Saw 48" Pro Kit2. DEWALT DWS5026 TrackSaw Track Clamps
Feature
For use with track saw cutting systemOne-handed operation for fast set-up
For fast, easy set-up
Removable pressure pads
Description
Track Clamps are for use with Track Saw cutting system. One-handed operation for fast set-up.3. Genesis GAPCS203 Plunge Saw Track Rip Guide Assembly Kit, 3 Piece For Use with Genesis Control Grip Saws 5.8A 4.5in GCS545C and Genesis Plunge Saw GPCS535CK
Feature
Enables the Genesis TrakRunner Saw to rip cut 48-inch wide sheets of wood or other soft materials3-piece 50-inch Track Assembly System
Includes all necessary hardware to attach to 48-inch wide material
Can be used with additional Track Assembly systems for unlimited width cutting
Works with Genesis GPCS535CK Control Grip Plunge Saw
Works with Genesis GCS545C Control Grip 4.5in Circular Saw
Description
GAPCS203 is a 3-piece Track Assembly for the Genesis TrakRunner GPCS535KM Multi-Purpose Plunge Saw, Genesis GCS545C 5.8A 4.5in Circular Saw, and Genesis Plunge Saw GPCS535CK. Allows for stable and accurate cutting of longer lengths of material. Includes 3-pieces of 42cm aluminum track, Two Connectors, Allen Wrench and 2G-Clamps. Multiple systems can be attached together to offer an unlimited cutting range.4. Yziss Miter Saw Track Tape Measure Self Adhesive Backing Metric Steel Ruler 1/2/3/5M
Feature
Main ingredient of the ruler is made of steel, with good hardness and corrosion resistant.Using imported environmental paint with double-layer baking, scale is clear and wear resistant.
Cut to desired length, peel off the back to expose to expose the adhesive, and apply where needed.
Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, Miter Saw,T-track,Miter Track Stop,Table Saw,Router Table,Band Saw,Woodworking Tools,etc
Instructions: Cut to desired length ,peel off the back to expose to expose the adhesive,and apply where needed
Description
Miter Track Tape Measure Self Adhesive Metric Steel Ruler Miter Saw Scale For T-track Router Table Saw Band Track Stop Saw Woodworking Tool1/2/3/5M Left To Right Reading,Right To Left Reading.
Features:
Main ingredient of the ruler is made of steel, with good hardness and corrosion resistant.
Using imported environmental paint with double-layer baking, scale is clear and wear resistant.
Cut to desired length, peel off the back to expose to expose the adhesive, and apply where needed.
Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, Miter Saw,T-track,Miter Track Stop,Table Saw,Router Table,Band Saw,Woodworking Tools,etc.
Instructions: Cut to desired length ,peel off the back to expose to expose the adhesive,and apply where needed
Specification:
Read: Left To Right , Right To Left , Middle to both sides
Material: Steel & special glue for metal (wear resistantHas a long service-life)
Length:1M / 2M / 3M / 5M
Width:13mm/0.51inch
Color: White
Quantity: 1 Pc
Package includes:
1 x Adhesive Metric Scale Tape Measure
5. Sliding Miter Saw, Tacklife 12inch 15Amp Double-Bevel Compound Miter Saw with Laser, Adjustable Cutting Angle, Extensible Table, 3800rpm, Clamping Device,10ft/3 M Cable, 40T Blade for Wood - PMS03A
Feature
Reliable bevel cutting & Max Cutting DepthDouble-bevel design allows 45 degree cuts(L)of up to 2.36*12.99 inches and 45 degree cuts(R) of up to 1.38*12.99 inches; It can meet bevel cutting needs by swing the saw compared with a single bevel miter sawPowerful Motor & Multipurpose CuttingPowerful 15Amp/1700W with 3800rpm smoothly cutting through multiple materials such as wood, plastics, aluminum alloy and metal plate
Sharp 40 Tooth TCT BladeComes with an ultra high grade 40 tooth tungsten carbide tipped blade, offering more possibilities for cutting various materials and allowing smoothly grooving and trenching
Ergonomic & Double linear sliding rail DesignD-handle design creates more comfortable and easy to use for users; Double linear sliding rail Design provide guarantee for more smooth, steady and precise cutting works
Laser Marker & Extensible TableLaser marker accurately track the real-time position for making the cutting more accurate and professional; Extensible table with vice clamping provide better support and balance to prevent material from warping
Description
Tacklife - Professional team on Amazon, which deals only with development of the tools
We commit ourselves to using qualitative tools to improve the quality of life
Double-Bevel & Maximum Cutting Performance
You are able to adjust the angle freely from -45-0-45 for the oblique cutting
(0 x 0 - 4.13 x 12.99inches) / (0 x 45 left - 2.36 x 12.99inches) / (45 x 0 - 4.13 x 9.06inches) / (45 x 45 left - 2.36 x 9.06inches)
Professional Laser Guide & Safer Clamping Device
A visible red laser guidance enables the cutting more precise and convenient
Come with a clamping device, no need to support the wood by hands any more, providing great safety
Efficient Dust Bag & Precise Mitre Scale
The large capacity dust collection bag makes your work more clean and healthy
Features a 45 degree L&R miter system with 9 positive stops, 0-45 degree bevel tilt, allowing for square cuts, bevel cuts and compound cuts
Specification:
Rated Power:1700W/15Amp
Rated Voltage: 120V~60Hz
No Load Speed: 3500rpm
Bevel Capacity: -45-0-45
Mitre Capacity: -45-0-45
40 Teeth TCT Blade:305mm x 25.4mm x 2.8mm
Package Dimension: 37.8*21.46*22.24Inches
Package Weight: 63.93Ibs
Package content:
1* Tacklife PMS03A Compound Miter Saw
1* 40 Tooth TCT blade
1* Clamping device
1* Dust bag
2* Side support
2* Allen wrenches
1* User Manual
1* Warranty Card
6. Shaoge Miter Saw Tape Measure Self Adhesive Metric Steel Ruler Miter Track Stop Tape 1m Right To Left
Feature
Main ingredient of the ruler is made of steel, with good hardness and corrosion resistantUsing imported environmental paint with double-layer baking, scale is clear and wear resistant.
Cut to desired length, peel off the back to expose to expose the adhesive, and apply where needed.
Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, etc.
Instructions: Cut to desired length ,peel off the back to expose to expose the adhesive,and apply where needed
Description
Adhesive Metric Scale Tape Measure 1m Paste Mechanical Steel Ruler Reverse For Router Saw Table Band Saw Woodworking ToolsFeatures:
Main ingredient of the ruler is made of steel, with good hardness and corrosion resistant.
Using imported environmental paint with double-layer baking, scale is clear and wear resistant.
Cut to desired length, peel off the back to expose to expose the adhesive, and apply where needed.
Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, etc.
Instructions: Cut to desired length ,peel off the back to expose to expose the adhesive,and apply where needed
Specification:
Read: Right to left
Material: Steel & special glue for metal (wear resistantHas a long service-life)
Dimensions: Length: 100cm/39.37inch Width:13mm/0.51inch
Color: White
Quantity: 1 Pc
Package includes:
1 x Adhesive Metric Scale Tape Measure
7. Woodhaven 4508 Chop Saw 95" Pro Kit
Feature
For shop use on a permanent chop saw setup. Our 4508 Pro Kit will make your chop saw a better tool. The Ultra Track forms the fence and is a full 3/4 thick by 3" high. Our Curved Stop attaches to the top of the Ultra Track fence and flips up when not needed or lifts out of the way when a board up to 7/8" thick is pushed against it. Two 96" Ultra Track fences mount to a table (you supply) on either side of the chop saw, flush with your chop saws fence.Includes two 95" Ultra Tracks and eight mounting brackets, two 12' Measuring Tapes, Curved Stop, Straight Stop and Stop Extension Arm. Need different Ultra Track lengths? Contact us with your specific requirements for a quote.
Lifetime guarantee against defects in material or workmanship. Made in the USA!
Description
Woodhaven 4508 Chop Saw 95" Pro Kit8. Woodhaven 4248 One Track
Feature
One Track provides an unlimited variety of quick and easy mounting and adjustment options for stops, hold-downs, etc. Anodized aluminum for strength and durability.Place on top of a wood fence and add a stop for an economical chop saw fence. Great inexpensive miter bar too! Recess into a table for hold-downs and fence adjustment.
T-slot in the track captures the head of a standard 1/4" hex bolt or our oval nuts. Not drilled, mount with screws or glue. These tracks are some of the most versatile jig building accessories you can use in your shop. Note: T-bolts do not fit in this track.
48" long x 3/8" height x 3/4" width
Lifetime guarantee against defects in material or workmanship. Made in the USA!
Description
Woodhaven 4248 One Track9. Hitachi TracRac 726212 Extension Stop for UU610 Miter Saw Stand
Feature
Fits on UU610 Miter Saw StandExtension Stop
Heavy-duty construction
Designed for professional contractors
Comes with a 5-year limited warranty
Heavy Duty Construction
Description
Hitachi TracRac 726212 Extension Stop for UU610 Miter Saw Stand10. 48" MITER MINI T-TRACK/STANDARD MITER T-TRACK COMBO - PW1029
Feature
Dual track combines Miter T-Track and Mini T-Track into one solid extrusion.One side of the track accepts a standard size miter gauge bar with its standard 3/4" x 3/8" with or without T-slot.
The other side fits a standard 1/4" x 20 hex head bolt, for setup of feather boards, stops, etc.
Add a miter track to your router table, table saw extensions and drill press tables and more.
The thick walled,heavy duty miter combo t track is made in 100% the USA. and measures appx. 32"
Recent Comments