The 10 best cabinet clamps for woodworking 2022
Finding the best cabinet clamps for woodworking suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best cabinet clamps for woodworking
1. Jorgensen Cabinet Master 24-inch 90 Parallel Jaw Bar Clamp, 2-Pack
Feature
This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure.Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp.
Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping.
Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading
Features ergonomic designed 2 component molded soft grip handle.
Description
This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large steel reinforced jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reserved on the bar and the clamp then acts as a spreader.2. BesseySET OF 2 BES8511 Cabinetry Clamp, Face Frames
Feature
Includes two (2) BES8511 Face Frame Cabinetry ClampsTighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
Clamp specifications: works on stiles up to 1-1/4 in. thick; 4" clamp capacity; 2" jaw; clamping force of 300 - 600 lbs.
Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
Description
This item consists of two (2) clamps. The BESSEY face frame cabinetry clamp is designed to combine the multiple steps of face frame cabinet installation into one easy process. It works on stiles up to 1-1/4 in. thick and has a clamp capacity of 4 in. The design of this clamp allows you to tighten, align, pre-drill and fasten the cabinet stile, all while the clamp is in place. The clamp holds the individual cabinet edges together while keeping the faces along the joint flush. Drill your pilot hole using the integrated pilot-hole drilling guide located on the clamp side. Then simply flip the guide out of the way to drive your screws in to connect the cabinet frames. There is no need to remove or reposition the clamp! Professional quality installation is achieved in a fraction of the time compared to the use of more conventional clamps. This heavy-duty clamp is made primarily of steel, with steel sliding T-bars and an aluminum alignment plate. It comes with 3 non-marring felt pads for the clamp faces and alingment plate to protect and cushion the points of contact on your cabinets. The BES8511 clamp weighs approximately 1.5 lbs. and includes the following specifications: 4 in. clamp capacity; 1-1/4 in. throat depth; 2 in. jaw width; 300 - 600 lbs. clamping force; and acme-threaded screws.3. Pony 8510BP Cabinet Claw, 2-Pack
Feature
The Cabinet Clawis a unique tool which combines the multiple steps of face frame cabinet installation into one easy processThis product is easy to use easy to install and highly durable
Professional quality installation is achieved at a fraction of the time compared to the use of more conventional clamps
A unique tool which combines the multiple steps of face frame cabinet installation into one easy process
Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position
Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps.
Protective pads protect cabinets from becoming marred during installation
Installs two stiles from 1-1/2 inch to 2 inch width and up to 1-1/2 inch thickness (each) with 4 inch opening capacity
Description
The Cabinet ClawIs A Unique Tool Which Combines The Multiple Steps Of Face Frame Cabinet Installation Into One Easy Process. Using This Clamp, Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened - While The Clamp Remains In Its Original Position; No Removal Or Repositioning Of The Clamp Is Necessary. Professional Quality Installation Is Achieved At A Fraction Of The Time Compared To The Use Of More Conventional Clamps. In Addition, Clamp Faces And Alignment Plate Are Furnished With Protective Rubber Pads To Cushion And Protect Cabinets From Becoming Marred During Installation. Included Is An 1/8" Drill Bit For Pre-Drilling Pilot Hole For Fastening Cabinets Together, Installs Two Stiles From 1-1/2" To 2" Width And Up To 1-1/2" Thickness (Each) With 4" Opening Capacity. Sold In Pairs.4. Bessey Cabinetry Clamp, Face Frames, BES8511
Feature
Combines the multiple steps of face frame cabinet installation into one easy processHolds individual cabinet edges together, plus faces flush
Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position
Integrated pilot hole simplifies drilling - Durable construction provides extra strength.
Includes protective non-marring pads.
Description
Heavy Duty steel clamp with steel sliding T-bars Specs: Clamping Capacity: 4" Throat Depth: 2"Jaw Width: 2" Clamping Force: 300-600 lbs This listing is for a two Bessey clamps.5. Bessey BES8511 Face Frame Clamp Pair
Feature
Bessey BES8511 Face Frame Clamp PairDescription
This item consists of two (2) clamps. The BESSEY face frame cabinetry clamp is designed to combine the multiple steps of face frame cabinet installation into one easy process. It works on stiles up to 1-1/4 in. thick and has a clamp capacity of 4 in. The design of this clamp allows you to tighten, align, pre-drill and fasten the cabinet stile, all while the clamp is in place. The clamp holds the individual cabinet edges together while keeping the faces along the joint flush. Drill your pilot hole using the integrated pilot-hole drilling guide located on the clamp side. Then simply flip the guide out of the way to drive your screws in to connect the cabinet frames. There is no need to remove or reposition the clamp! Professional quality installation is achieved in a fraction of the time compared to the use of more conventional clamps.This heavy-duty clamp is made primarily of steel, with steel sliding T-bars and an aluminum alignment plate. It comes with 3 non-marring felt pads for the clamp faces and alingment plate to protect and cushion the points of contact on your cabinets. The BES8511 clamp weighs approximately 1.5 lbs. and includes the following specifications:4 in. clamp capacity1-1/4 in. throat depth2 in. jaw width300 - 600 lbs. clamping forceAcme-threaded screws
6. Bessey EKT55 One-Handed Edge Clamp
Feature
Features a compound screw mechanismClamps surfaces up to 2-1/8" thick
Pressure pads use soft plastic caps for gentle, no-slip clamping
Clamp panels from 3/8 inch to 2 inch
Prevents materials from slipping
No harm to clamped surfaces
Provides secure hold while realignment
Max: 450-500 lbs. of pressure
Description
Features A Compound Screw Mechanism That Allows Simultaneous Engagement Of The Top And Bottom Pressure Pads While Pressure Is Applied To The Front Edge Of The Countertop. Clamps Surfaces Up To 2-1/8" Thick. Pressure Pads Use Soft Plastic Caps For Gentle, No-Slip Clamping. Constructed With A Strong Aluminum Frame.7. 3-Way Face Clamp
8. Yaetek (4 Pack) 3/4" Wood Gluing Pipe Clamp Set Heavy Duty PRO Woodworking Cast Iron
Feature
Constructed of tough cast iron that keeps wood steady as you work, this clamp is a great addition to any woodworking work bench at the home or shop!This clamp is perfect for woodworkers working on cabinets and wooden boxes! Just slide the pipe clamp through any length 3/4 in
Pipe to hold wood in place for gluing and drilling!
This clamp is limited only by the length of the pipe you supply
Listing is for 4 clamps
Description
( 4 Pack ) 3/4" Wood Gluing Pipe Clamp Set Heavy Duty PRO Woodworking Cast IronThis clamp is perfect for woodworkers working on cabinets and wooden boxes! Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling! Constructed of tough cast iron that keeps wood steady as you work, this clamp is a great addition to any woodworking work bench at the home or shop!
This clamp is limited only by the length of the pipe you supply
Four plate clutch for high clamping pressure, quick release
Heavy duty lead screw
Cast iron construction
Listing is for 4 clamps
Pipe not included
9. Shop Fox D2269 Face Frame Clamp
Feature
3/4-inch capacityNon-marring pads
Friction jaws hold tight
Lightweight yet rugged
Replaces the need for awkward pipe clamps
Description
Automatic Gripping Jaws Work Just Like The Right Angle Clamp; But The Jaws Are Turned 90; Making Them Just The Ticket For Face Frame Construction. No More Three Handed Holding While Working With Pipe And Bar Clamps; The Face Frame Clamp Allows You To Work With Just One Joint At A Time. And Since It Applies Pressure In-line With The Joint; Glue Slipping Is Also A Thing of The Past. Super Strong Construction For Years of Dependable Service. For 3/4 Stock.Specifications:
3/4" Capacity
Non Marring Pads
SHIPS SAME DAY IF PAID FOR BY 4PM PST"
10. Shop Fox D2268 Right Angle Clamp
Feature
3/4-inch CapacityNon-Marring Pads
Solid construction, built-to-last
Recent Comments