Related posts

Feature

Material: ABS gun body, Rubber blocked head. Gun Body Size: 10.8''x10.8x3.7 (inch)
This pipeline dredge takes advantage in high pressure to remove blockage from the pipe.
Type of blockage: suit for: hair, vegetable, accessory; Not suit for: urine alkali, cement, hard object. It can effectively remove hairs, cloth, tea, vegetable, rubbish from pipeline.
Four suckers can be used in different size of pipelines, washbasin, sink, bathtub, floor drain, squatting pan, toilet and etc.
Easy to use. Pull the handle about 15 to 25 times, repeat several time until remove the blockage.

Description

This drain blaster cleaner can effectively remove hair, cloth, tea, vegetable, leaves, grease, accessory and rubbish from pipelineare, but not suit for urine alkali, cement, hard object.

Features:
. Works on sinks, tubs, and toilets.
. Reusable, environmentally friendly, and easy to use.
. No waiting for a plumber.
. No chemicals.
. Safe for any drain, works on sinks, bath tubs and toilets

Specification:
(1)The mouth of the outlet must be immersed in the blocked fluid to guarantee air pressure. You should add enough water into the sinks,pipes or toilets, otherwise it will not work well.
(2)If the pipeline is blocked, it is advisable to put some soft debris, making the pipeline near full blocked for better effect
(3)You can use towel,rags,plastic sheet or other things to prevent water from splashing out if the pressure if too high
(4)If the pool or sewer has multiple overflows, please ensure that the other overflows are closed before work so as to avoid accidental discharge of contaminants or affect the dredging effect.
(5)Better to pump 8-10 times once, avoiding burst of water pipes caused by excessive pressure.
(6)This product is a pneumatic tool, please keep it away from children and do not disassemble it.
5cm sucker for use on small sinks, narrow pipes, and 1.5" drain openings
6.5cm sucker for use on all sinks and drains with openings larger than 1.5"
11.5cm sucker for tub and shower drains
20.5cm sucker for toilets and large floor drains
How to use:
(1) .Install the appropriate plug according to the size of the pipe diameter
(2) .Pump up the hand pump about 10-20 times, until could not pump into the air to get high pressure gas
(3) .Block pipe outlet, have it sealed; Pull the trigger to release the high pressure gas.(you could have it repeated till dredge the pipeline.)