Related posts

Feature

FEEDBACK REMOVAL - The Behringer C-2 Matched Pair features cardioid pickup pattern that effectively eliminates feedback. Ideal as main and support microphones for live and studio applications.
ELIMINATES LOW-FREQUENCY DISTORTION - The C2 microphones have switchable low-cut filters that allow you to remove low-frequency disturbances like subsonic noise. Use the level attenuation when your mic is exposed to extremely high sound pressures.
HIGH-QUALITY SOUND REPRODUCTION - These condenser mics have low-mass diaphragms, which produces an ultra-wide frequency response of 20Hz to 20kHz.
RELIABLE SIGNAL INTEGRITY - The C-2 has gold-plated 3-pin XLR connector, specifically made for highest signal integrity.
INCLUDES - Behringer C-2 Matched Pair Cardioid Condenser Microphones. Blucoil Audio Balanced XLR Cable - Premium Series 3-Pin Microphone Cable, Speakers and Pro Devices Cable, Black, 10 Feet. 5 Pack of Cable Ties.

Description

Behringer C-2 Matched Pair Cardioid Condenser Microphones
The Behringer C-2 is a small-diaphragm matched pair condenser mics that are highly compatible for stereo recordings. You can use both microphone or individually, each mic is phantom powered (+48 volts). The C-2 has cardioid pickup pattern which is most sensitive to sounds coming from the front or sides of the microphone. The sounds coming from the back of the mic is attenuated, which makes it suitable for recordingvocals within a group or individual instruments.

TECHNICAL SPECS:
  • Transducer Type: Condenser, 16mm
  • Operating Principle: Pressure Gradient
  • Polar Pattern: Cardioid
  • Connector: Gold-plated balanced XLR connector
  • Open Circuit Sensitivity (@ 1kHz): -41dBV (0dBV = 1V/Pa)
  • Frequency Response: 20Hz to 20kHz
  • Level Attenuation: 10dB, switchable
  • Low-cut Filter: 6dB/oct. @ 120Hz (switchable)
  • Max. SPL (=1% THD @ 1kHz): 140dB (0dB), 150dB (-10dB)
  • Equivalent Noise Level (IEC 651): 19dBA
  • Signal-to-noise Ratio: 75dB
  • Nominal Impedance: 75Ohm
  • Load Impedance: Greater than 1kOhm
  • Supply voltage, current: +48V, 3mA
  • Dimensions: Shaft: 0.8" | Length: 3.7"
  • Weight: 0.09 kg / 0.2 lbs

Also Comes With

Blucoil Audio 10 Feet Balanced XLR Cable
The Blucoil Audio 10' Balanced XLR Cable features 24AWG wire cable gauge and 98% braided shield for EMI and RFI noise isolation. It is made with high-quality 3-Pin zinc-alloy connector, rugged metal connector casting, and oxygen free copper (OFC) cables. The XLR M to XLR F connects mics to mixers, preamps, audio interfaces, and recorders.

Additional 5-Pack of Blucoil Cable Ties to complete your bundle!