Related posts

Feature

Wand comes with a flow valve and turbo-blast trigger, precision die-casting, each of which are tested to ensure safety
Stainless steel blow torch is not easy to rust to prevent gas leakage, Insulated ergonomic nonslip grip
Outfitted with natural rubber explosion-proof hose, resistant to high pressure, ageing, abrasion, oil and bending
Diameter of nozzle: 1 3/16"(30mm), Extended Length of torch: 16.5", Length of hose: 60"
Pipe welding, jewelry processing, cable repair, quenching, waterproof construction, breeding sterilization, fur removal of meat, heating thawing

Description

DAHAN Liquefied Gas Blow Torch is a great propane torch for small jobs around the home that need a powerful flame. Used widely for cooking, lighting BBQ and fires, thawing frozen water pipes, hobby and craftwork, model making, paint stripping, Pipe welding, jewelry processing, cable repair, quenching, waterproof construction, breeding sterilization, fur removal of meat, etc.

Diameter of nozzle: 1 3/16" (30mm) Extended Length of torch: 16.5" Weight of torch without hose: 0.73lb. (332g)
Diameter of nozzle: 1 3/8" (35mm) Extended Length of torch: 17.7" Weight of torch without hose: 0.78lb. (354g)
Hose Length: 60"
Hose Weight: 7.6oz. (216g)
Stainless steel blow torch
Natural rubber explosion-proof hose
Insulated ergonomic nonslip grip
Dual switch: a flow valve and turbo-blast trigger

Directions for use:
1.Check
Connect every part of the blow torch, tighten the hose clamp, connect the gas tank, turn off the torch switch, loosen the valve of the gas tank, then check for gas leak.
2.Ignition
Slightly loosen the blow torch switch, ignite directly at the nozzle and adjust the torch switch to reach the desired temperature.
3.Close
First, close the valve of the gas tank. After the fire is out, then close the torch valve, and make sure there is no gas left in the blow torch and hose.

Attention:
1.Some parts will be very hot during and after use. Keep children away
2.Do not let the product contact oil, corrosive gases and liquids
3.Do not ignite in the large flow of gas
4.Hose must not be burned and aged
5.Don't use inferior gas
6.Always check the connecting parts and keep them sealed
7.When you stop using it, hang it in a dry place