List of the Top 10 rfid usb you can buy in 2022
When you want to find rfid usb, you may need to consider between many choices. Finding the best rfid usb is not an easy task. In this post, we create a very short list about top 10 the best rfid usb for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 rfid usb:
Best rfid usb
1. RFID Card Reader,LANMU RFID Card Reader USB,RFID Card Reader 125khz Contactless Proximity Sensor Smart ID Card Reader EM4100
Feature
LANMU Rfid Card Reader is a USB interface driver-free reader is a high-performance computer external input device that can read out the serial number of the RFID card and output to the computer through the uSB port according to the specified format without additional procedures.Simple and fast read card,can be read in any number, this function is suitable for extended functionality in existing software, without any modification to the original software.
Can connect computers and Android devices(only the usb interface can),Rfid Card Reader is connected to the PC computer device and through Word or Notepad recorded the card number.Android device requires an OTG adapter.
Application scope: Membership management, identification of occasions, such as: clubs, schools, government, enterprises, social security, charge management, Internet cafes, etc.
Lifetime Warranty:LANMU offer satisfactory service for every purchase of Rfid Card Reader that send a replacement or refund if there is anything wrong,making sure the no risk shopping for customers.
Description
Packing list:1*LAMMU Rfid Card Reader1*USB cableProduct Description:ID card reader can read the top 10 digitalMaterial: Hard PlasticUSB cable connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP, Vista, Windows7, Linux) Can read all 125Khz RFID EM4100 EM410X Card/TagProduct technical index Communication:Standard HID SignalCommunication Interface: full speed USB Device interface,compatibleUSB V2.0 PowerSupply mode:USB Universal serial bus interface power supplyWorking frequency:125 KHz.Maximum induction distance:3-8CM;- SupportCard type: EM Series,4001 Compatible RFID card Power consumption: less than 0.5 WExterior dimension:110 x 80 x 30MM.Usage environment: temperature 0--50CHumidity:50-95RHP ressure:88-106Kpa.Instructions for useMethod of installation and use1. Connect with computer through USB interface directly. When the buzzer sounded, reader into the self-inspection. And the same time, LED turn into red means standby.2. Open the output of computer software,such as Notepada word document or Excel sheets.3. The mouse in Notepad or WORD document clicking.4. Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag, LED light change from red to green.Detecting device is connected:Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer.Precautions1. Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.2. If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints. Common problemsOperation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF2. Chafon UHF Rfid USB Desktop Reader with Keyboard Emulation Output(read only) + 2pcs UHF Testing Cards
Feature
Support ISO18000-6C (Default Shipping) or ISO18000-6B protocol cards read only function.Please note:Not support IOS systemOperating Frequency:860 - 960 MHz frequency band,support USB1.1 interface with HID mode.
Default Output format24bit EPC number.If there were other output format requirement, confirm with Chafon customer service in advance.
Size:104(L)x68(W)x10(H)mm;Reading range can up to 10cm.(depends on the tag).
With Keyboard Emulation and Plug and Play,No programming, can be integrated into existing software.
Description
Chafon UHF Rfid USB Desktop Reader is a high performance Multiple Protocol UHF RFID Reader. It is designed upon fully self-intellectual property. Based on proprietory efficient digital signal processing algorithm, it supports fast tag read operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, attendance system, anti-counterfeit and industrial production process control systemFEATURES
1. Self-intellectual property;
2. Support ISO18000-6B or ISO18000-6C(EPC C1G2)(Default Shipping) protocol tag;
3.Operating Frequency:860 - 960 MHz frequency band.;
4. FHSS or Fix Frequency transmission;
5. RF output power up to 10dbm( Need to customization before order);
6. No external power source needed;
7. Built-in antenna with effect distance up to 100mm*;
8. Support USB1.1 interface with HID mode;
9. Slim outline;
10. Default Output format24bit EPC number.
Absolute Maximum Rating
ITEM SYMBOL VALUE UNIT Power Supply VCC 6 V Operating Temp. TOPR -10~+60 Storage Temp. TSTR -25~+80
Electrical and Mechanical Specification
Under TA25VCC+5V unless specified ITEM SYMBOL MIN TYP MAX UNIT Power Supply VCC 4.5 5 5.5 V Current Dissipation IC 120 200 mA Frequency FREQ 902 928 MHz Effective Distance* Dis 0 100 200 mm
Package include:
1X UHF Rfid USB Desktop Reader (Read Only)
2X Testing Cards.
Please note:Not support IOS system
3. UHF Reader/Writer with 860-960mhz Frequecy and Complie with The Standard of EPC C1G2 ISO 18000-6C Support Keyboard Emulation Output and Free SDK for Second Development.
Feature
Desktop UHF reader / writer +2pcs UHF tag labelssupport USB - Keyboard emulation out-put(read UID only)
support read write Alien3 tag/Monza 4E label,9662 tags.
Reading distance up to 50 cm (depend on tag)
providing free downloading SDK to customer for second development.
Description
Introduction: FONGWAH WRD-130U1 is a Desktop UHF reader / writer, which is supplie UHF chip like H3,H4 complie with the standard EPC C1G2 ISO 18000-6C. support USB - Keyboard emulation out-put, read tag UID number,out-put format can be set up. SDK,DLL of the device will be provided for free to develop the second software.For more details, please refer to the file (file is in CD)"Configuration Tool of WRD-130U1" Features: Frequency: 860~960MHz (Set frequency on demand) US 902-928, TW922-928, CN 920-925, CN2 840-845, EU 865-868 ProtocolsEPC C1G2 ISO 18000-6C InterfaceUSB - Keyboard emulator Supply voltageUSB Port (3 - 7V DC) RF Power Output-2dBm ~18dBm, adjustable Reading distance 5-50 cm (depend on tag) Operation Temp. 0C to +50C (+32F to +122F) Dimension120x85x23 mm Indicates:led,and beep. when scan the tag,the led become green,the beep will sound. Package include: 1X UHF Rfid USB Desktop Reader writer+ 2pcs UHF Testing Cards. Tips: Dear Cusotmer: Thanks for visiting our store.for the rfid reader writer,here we would like to kindly remind you that our reader writer is not compatible with any application software or with any other company's reader We provide you the free SDK( the files is in CD) together the device after you purchased. The SDK will help to guide you to do the second development.For free SDK download:http://en1.fongwah.com/wp-content/uploads/2017/10/WRD-130-U1-UHF-Reader-English-SDK.rar4. KKmoon ACR RFID Reader and Writer Access contorl with USB SDK and 5pcs IC Card
Feature
USB full speed (12Mbps). USB PnP. Bi-color LED.Built-in antenna. NFC reader. ISO/IEC18092 (NFC) compliant.
NFC tags access speed = 424kbps. Contactless smart card reader. Support FeliCa card.
Support ISO 14443 Type A & B cards - MIFARE cards (Classics, DES Fire). CCID standard.
CE and FCC certificated, and RoHS compliant. User controllable buzzer. SAM socket.
Description
ACR122 is a PC-linked contactless smart card reader/writer developed on the 13.56MHz Contactless (RFID) Technology and followed the ISO/IEC18092 Standard for Near Field Communication (NFC), supporting not only for Mifare ISO 14443 A and B cards but also NFC and FeliCa contactless technologies.Application:
Home banking and home shopping
E-commerce
Checking the balance of electronic purses
Network access control
Customer loyalty program
Identification and authentication
Ticketing
Online gaming
Parking and toll collection
Automatic fare collection
Public transportation terminals
Physical access control
Time attendance
Vending machines
Contactless public phones
Logistics and supply chain management
Specifications:
Interface: USB Full Speed
Operating distance: <= 50mm
Supply voltage: Regulated 5V DC
Supply current: 200mA (operating); 50mA (standby); 100mA (normal)
Operating temperature: 0-50 degrees Celsius
Operating frequency: 13.56MHz
Standards/certifications: ISO14443 1-4, CE, FCC, RoHS compliant
Operating system support: Windows 2000, 2003, XP 32, XP64, Vista 32 and Vista 6, Android 3.1 and above
Card reader size: 9.8 * 6.5 * 1.3cm / 3.9 * 2.6 * 0.5in
Card reader weight: 76g / 2.7oz
Package size: 20.3 * 9 * 2.5cm / 8.0 * 3.5 * 1.0in
Package weight: 134g / 4.7oz
Package List:
1 * ACR122U NFC Contactless Smart Card Reader
5 * S50 Cards
5. rfid card reader 125Khz EM4100 ID Smart proximity Card USB Reader
Feature
em4100 reader125khz reader
smart card reader
access control reader
rfid reader
Description
Product InformationHigh Quality
USB Interface
Read RFID / Proximity Card Can Read First 10 digits of the RFID / Proximity Cards
No driver needed for Windows 2000, 2003, XP, Vista and 7 Plug and Play Reliable working condition Material: Hard Plastic Diagnostic Power LED Built-in operating buzzar Powered directly from USB, no need external power supply
Dimension: 115 x 80 x 30 mm (L x W x H)
Warranty: 12 months
Package includes: New USB RFID Proximity Reader x 1 USB cable x 1
This reader is no need driver,can plug into your PC and use directly.
Installation Instructions
First: Connect the usb cable with the card reader to the computer USB port.
Second: The reader will 'drip' sound and flash about that power successfully, and then half a second after the 'drip' sound and flash about that device self-test successfully, without Install any drivers, windows will automatically recognize it.
Third: Open one EXCEL or WORD ,the card number would be input by self
Please note: This reader can't support H ID Card
6. UHPPOTE Metal Structure IP65 Wiegand 26 bit 125KHz RFID Reader for HID & EM
Feature
Support Card: 125KHz EM, 125KHz HIDLevel of Protection: IP65
Appearance: metal structure,safe,anti-vandal
Output format for EM card: Wiegand 26 compulsively
Output format for HID card: It will output Wiegand 26-37 bit according to HID card's format automatically
Description
Features:
Appearance: metal structure,safe,anti-vandal
Support Card: 125KHz EM, 125KHz HID
Output Format: 26bit is factory default setting
Use HID Card: Reader can identify the format of HID card and output automatically
Ultra-low Power Consumption: <30mA
Protective Performance: IP65 (fully-potted), tamper alarm
Testing: electrical fast transient burst generator 3.5KV, electrostatic immunity tester 15KV, high and low temperature tester -40~60 / -40~140
Suit For: Storage, bank, prison etc
Specifications:
Supply Voltage: 12VDC
Standby Current: <30mA
Support Cards: 125Khz EM & HID
Response time: 0.1s (typical)
Output format for EM card: Wiegand 26 compulsively
Output format for HID card: It will output Wiegand 26-37 bit according to HID card's format automatically
Card Reading Range: 3-6cm / 1.18-2.36in
Operating Temperature: -40~60 / -40~140
Level of Protection: IP65
Antistatic: 15KV
Transmit Distance: 100m / 328ft
Cable Length: 90-100cm / 35.43-39.37in
Dimension: L135mmxW58mmxH26(mm) / L5.31xW2.28xH1.02(in)
Package:
1 x Card Reader
1 x User Manual
4 x Rubber Bungs
4 x Self Tapping Screws
Tips:
HID card can output wiegand 26-37 automatically, other cards are output wiegand 26 compulsively.
Can't work alone,need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)
7. WINGONEER 125Khz USB RFID Contactless Proximity Sensor Smart ID Card Reader EM4100
Feature
JT308 series RFID card reader is simple, fast read card. Belong to standard HID devices do not need to install the driver, can be read in any number, this function is suitable for extended functionality in existing software, without any modification to the original software.Product technical index - Communication: StandardHIDSignal communication;- Interface: full speedUSB Device interface, compatibleUSB V2.0 - Power supply mode:USB Universal serial bus interface power supply;- Working frequency:125 KHz.
Maximum induction distance:3~8CM;- Support card type: EM Series,4001 Compatible RFIDCard;- Power consumption: less than 0.5 W?- Exterior dimension:110 x 80 x 30MM.
Usage environment: temperature 0--50C, humidity:50-95RHPressure:88-106Kpa. Li Application scope - Membership management, identification of occasions, such as: clubs, schools, government, enterprises, social security, charge management, Internet cafes, etc..
Description
WINGONEER trademark Reg.NO:4747611WINGONEER 125Khz USB RFID Contactless Proximity Sensor Smart ID Card Reader EM4100
Product Description:
ID card reader can read the top 10 digital
Material: Hard Plastic
USB cable connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP, Vista, Windows7, Linux)
Can read all 125Khz RFID EM4100 EM410X Card/Tag
Diagnostic Power LED
Built in operating buzzer
Output format: First 10 digit
Powered from USB, does not require any external power supply.
Easy usage
Compact design.
Authority Certification: CE
Package Included:
1x WINGONEER 125Khz USB RFID Contactless Proximity Sensor Smart ID Card Reader EM4100
8. YARONGTECH 125khz usb rfid reader EM4100 desktop id card reader (10D)
Feature
125khz rfid readerDescription
1.Support EM4100/TK4100 Chip2.USB interface.
3.Read Only
4.Different output format.Please choose the right output format when you order.
10D: such as "0040856638"
10H: Such as "01026f6c8a"
8D: Such as "07302208"
8H: Such as "026f6c8a"
9. 902~928mhz Frequency 6 Meters Long Distance UHF Passive RFID Card Reader Writer ISO18000-6C(EPC C1G2)+Free 3 Card +3 Windshield Tag
Feature
This is USA Frequency UHF RFID Reader/Writer, Passive Reading, Support ISO18000-6C(EPC C1G2)Support RS232, RS485, Wiegand 26/34 interface.Note that Not support IOS system.
Integrated 8dbi built-in antenna HCP circular Range:3m~6m. Application:Parking and Warehouse management etc. Industrial design, water resistant,easy to install.
Work Mode: auto-running, interactive and trigger-activating. Support adjacent discriminant function,prevent the same card repeat reading in certain period
Low power dissipation with single +9V DC power supply.
Description
Package Include:1 x UHF Long Range Reader
3 x UHF Cards+3 x Windshield Tags
1 x iron frame Bracket
1 x 100~240VAC to 9VDC power Adapter(USA Plug)
1 x USB-RS232 cable
1 x CD disk for demo software/manual and SDK
Note:Not support iOS system, Read UHF card/tag, doesn't read Bank credit card.This reader is mainly for serial reading( one by one ), if need concurrent reading( read multiple cards/tags shortly), please contact us, we will recommend other reader.
This UHF RFID Middle Range Reader is a high performance integrated reader. it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics,Automatic weighting,access control( Door Control,Car Parking control .etc.) and anti-counterfeit and industrial production process, control system
This reader supports wiegand26 interface also, can directly connect to control device to build access control system
This reader also supports connection with Arduino device or Raspberry Pi(By RS232), also can communicate with Linux & all windows System( win7/8/win10 32/64 bit),Please send us message, we can reply you with development guide and some sample code.
Features:
1. Support ISO18000-6C(EPC C1G2) protocol tag/Card
2. Operating frequency: 902~928MHz frequency
3. FHSS or Fix Frequency transmission
4. RF output power up to 30dbm(adjustable)
5. 8dbi antenna with effect distance up to 3-6Meters
6. Provide C#, VC, Java, Linux,raspberry pi sample Code
Interface:+9V / GND / Wiegand DATA0 / DATA1 / RS485 R+ & R- / Trigger / RS232 RXD / RS232 TXD
Parameters:
Dimensions: 230x220x50mm
Operating Temp: -25 ~ +60 degree
Interface: RS232, RS485, Wiegand26
Indicator: Buzzer
Antenna: Built-in 8dbi circularly polarized antenna
Read Range: 3-6M, tag and environment dependent
10. UHPPOTE Middle Reading Distance Range (Up to 40) Wiegand 26 125KHz RFID EM-ID Reader For Parking SystemFID Reader for Parking System
Feature
Type: Wiegand 26 BitCard Type: EM-ID Card (Can't support encrypted cards, such as HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell,etc)
Mainly used for parking, elevator, logistics industry,etc
The Reading range is a complex parameter,So called "Middle Range",only means the unit works with the special long range card,that is a 2mm thickness credit size card.
Normally, the unit can also work with normal EM cards,normal 2mm/0.08in thickness card can reach 60cm/23.6in range, 0.8mm/0.03in card can reach 40cm/15.7in range.
Description
Specification:
Decode time: <0.2s
Communication: Wiegand 26
Card type: EM card,EM compatible card, EM4100/4102 (Can't support some encrypted cards,such as HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell,etc)
Frequency: 125kHz
Induction Distance: Common Card up to 30-40cm(11.8"-15.7") / Long range proximity card up to 80-100cm(31.5"-39.4")
Power supply: DC 12V
Data transfer range: max.80mA
Current: 200mA
Working Temperature: 0~70 / 32~158
Working Humidity: Less than 80%
Dimension (LxWxH): 230x230x35mm / 9.1"x9.1"x1.4"
Material: Plastic casing & epoxy saturated
Package:
1 x 125Khz 1m Range Proximity Waterproof Reader
Notification:
The Reading range is a complex parameter,So called "1M range",only means the unit works with the special long range card,that is a 2mm thickness credit size card.Normally, the unit can also work with normal EM cards,normal 2mm/0.08in thickness card can reach 60cm/23.6in range, 0.8mm/0.03in card can reach 40cm/15.7in range.
Can't work alone,need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)
Recent Comments