How to buy the best audio dac hat?
When you want to find audio dac hat, you may need to consider between many choices. Finding the best audio dac hat is not an easy task. In this post, we create a very short list about top 10 the best audio dac hat for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 audio dac hat:
Best audio dac hat
1. Audio DAC HAT Sound Card (AUDIO+) for Raspberry Pi Zero/PI3/PI3B/PI3B+/PI2/Better quality than USB
Feature
DAC I2s 24-bit audio with studio sampling qualityLine out stereo 3.5mm jack for stereo input
software volume control
Free RCA connector included
Compatible with Raspberry Pi Zero / PI3 / PI3B / PI3B+ / Pi 2
Description
Audio DAC HAT Sound Card (AUDIO) for Raspberry Pi Zero / PI3 / PI3B / PI3B+ / Pi 2 / Better quality than USB2. Inno-Maker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 3 B+ Pi Zero etc. (DAC HAT)
Feature
RPI-HIFI-DAC Module is made to solve the problem of Raspberry Pi with audio files sampled at 44khz and multiple, too much jitter on i2s clocks.We enter the master mode for i2s instead of the RPI giving the clock on the line, the DAC itself sends the clocks and RPI sends the data (file to be played).
RPI-HIFI-DAC is unique for we have implemented the design. First we separated the power on 3 channels and filter it: one for digital side, second for analog, third for the clocks.
We use some good brand LDOs on the market. In addition, we used two oscillators with very low jitter for clock units. On the analog stage we are using a film capacitor (not ceramic) for a quiet DC to feed the TI IC to reduce signal distortion.
Note: Software and Document will be updated accoring to RPI kernelplease download from our website product page or wikiyou can find link from color page
Description
[Note:] Inno-Maker has experienced embedded design team, we can supply customized board based on Raspberry Pi, Micro:bit, Beaglebone and other open source boards, and provide PCBA production, board testing, and product assembling. [Features:] 1. Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality. 2. Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack. 3. With 138mw headphone Amplifier can directly drive headphone. 4. Work status indicators facilitate the understanding of the system working status. 5. HAT size. 6. DAC SNR is 112Db. 7. DAC THD+N @ -1 dBFS -78dB. 8. Full Scale Output of DAC is 2.1Vrms. 9. Dynamic Range of DAC is 112dB. 10. Sampling Frequency ranges from 8kHz to 384kHz. 11. Ultra-low noise voltage regulators for optimal audio performance. 12. Integrated EEPROM for automatic configuration(Option). 13. Automatically switching frequencies according to the input I2S signals. 14. Dual low jitter crystal oscillators for Master Clock generation. 15. Infrared remote control connector (using GPIO26). 16. DAC output coupled with Film capacitor . [The third-party system:] RPI-HIFI-DAC module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc. Like max2play and Volumio User can easily download the latest software from the official website, follow the official user guide do some simple configuration then you can enjoy it. [Packing List:] 1 x RPI-HIFI-DAC Module Note: The raspberry pi 3 board is not included.3. Audio Injector Zero sound card for the Raspberry Pi
Feature
Stereo input and output, including a microhpone input (microphone supplied).Headphone amplifier - 50 mW max power into 16 ohm and 30 mW max power into 32 Ohm headphones
Standard GPIO available to allow you to keep stacking add ons and hats
DAC and ADC : 96 kHz, 32 bit audio. Linux ALSA driver already integrated into the stock Raspbian release.
No through hole components are populated. Support and setup : http://forum.audioinjector.net
Description
The Audio Injector sound card is an add on for the Raspberry Pi giving it high quality audio. The Audio Injector is perfect if you want to do an audio project with your Raspberry Pi, whether it requires audio input, output or both. A headphone amplifier is included on board. This version allows you to populate all through hole components as best for your project. This product comes with the sound card, an electret microphone and all the shown extras.4. Pimoroni pHAT DAC 24-bit/192KHz Sound Card for Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B
Feature
24-bit/192KHz Sound CardCompatible with Raspberry Pi Zero / A+ / B+ / Raspberry Pi 2 Model B
Line out stereo jack
Kit includes: Assembled pHAT DAC and 2x20 0.1" female GPIO header
Texas Instrument's PCM5102A stereo audio DAC chip
Description
The pHAT DAC provides a super affordable high-quality DAC for the Raspberry Pi. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry Pi's I2S interface on the 2x20 pin GPIO header. This kit has a 3.5mm stereo jack pre-assembled but doesn't include a dual RCA phono connector. Though designed to match the format of the Raspberry Pi Zero it is compatible with all 40-pin GPIO Raspberry Pi variants (2/B+/A+/Zero). Features: 24-bit audio at 192KHz Line out stereo jack Optional landing for dual RCA phono connector Compatible with Pi 2/B+/A+/Zero pHAT format board Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface Kit includes: Assembled pHAT DAC 2x20 0.1" female GPIO header At the heart of pHAT DAC is Texas Instrument's PCM5102A stereo audio DAC chip.5. Sound Card for the Raspberry Pi with inbuilt microphone
Feature
Stereo RCA input and output, with volume knobsHeadphone amplifier - 50 mW max power into 16 ohm and 30 mW max power into 32 Ohm headphones
Standard GPIO available to allow you to keep stacking add ons and hats
DAC and ADC : 96 kHz, 32 bit audio. Linux ALSA driver already integrated into the stock Raspbian release.
Support and setup : http://forum.audioinjector.net
Description
Audio Injector sound card is an add on for the Raspberry Pi giving it high quality audio. The Audio Injector is perfect if you want to do an audio project with your Raspberry Pi, whether it requires audio input, output or both. A headphone amplifier is included on board.6. JustBoom DAC Zero pHAT for Raspberry Pi Zero
Feature
The JustBoom DAC Zero pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi Zero and is by far the easiest and neatest way to add an audio output to your Raspberry Pi Zero. The JustBoom DAC Zero pHAT has been designed with a super-compact form factor matching that of the Raspberry Pi Zero but still features a considerable amount of functionality.KEY FEATURES: Full high quality audio - 384kHz / 32bit; Includes both a DAC (digital to analog converter) and headphone amplifier; Line-level RCA and headphone amplified 3.5mm jack outputs; Plug and play compatibility for ease of use; Hardware and software volume control from your Raspberry Pi; No soldering required; Powered by the Raspberry Pi GPIO header;
Compatible with Raspberry Pi Zero v1.3 and Wireless (and also compatible with the Raspberry Pi A+, B+, 2B and the new 3B, but we would recommend the JustBoom DAC HAT for this purpose); Mounting hardware included; Optional IR receiver included in package; Full driver support in Raspbian / NOOBS; Compatible with the JustBoom Player / OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others; JustBoom Player pre-configured software available on SD
Description
SPECIFICATIONS Burr-Brown / Texas Instruments PCM5121 DAC chip - 384kHz / 32 bit. Please note that due to Linux driver restrictions, max frequency is currently limited to 192kHz by standard on the Raspberry Pi - however, this can be increased with some manual driver updates Texas Instruments TPA6132A2 headphone amplifier - 25mW Fully integrated hardware volume mixing via 'alsamixer' or any ALSA compatible application Single line of code in the Raspberry Pi config to activate the device tree driver configuration (or a simple menu based setup in some operating systems) Optional Vishay TSOP4838 IR receiver included (solder yourself if required) - Also possible to use Vishay TSOP4938 or TSOP4138 or TSOP34338SS1F 106dB signal to noise ratio (SNR) and -92dB total harmonic distortion (THD +N at -1dB) for best-in-class audio Advanced ESD protection on both headphone and RCA outputs Ultra low noise voltage regulator for the best audio output (LDO 30uVrms) Optional solder-yourself RCA jacks for additional stereo line-level output - Switchcraft PJRAN1X1U02X (white) and Switchcraft PJRAN1X1U03X (red) Optional solder-yourself playback LED - Kingbright L-934GD (green) or Multicomp MCL034MD (red) USAGE IDEAS Add an audio output to your Raspberry Pi Zero in a neat and simple way Streaming (either from cloud or network storage) high-definition audio player Multi-room audio player Media centre / set-top box living room entertainment system Shop floor / elevator / background music audio player High quality audio player with local storage Desktop high definition audio player with amplified headphone output And many many more....7. WINGONEER WX5000 Multifunction Expansion Shield for Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Feature
Supports Operating System: Moode Audio Player; OSMC; Openelec; Raspbian Jessie ; Volumio; Pi Core PlayerDedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
Used the ESS Technology Sabre premier stereo DAC ES9023
ES9023 delivers jitter-free studio quality audio with 112dB DNR
Used the Texas Instruments ultra-low-noise voltage regulator; ClassD amplifier chipset (TPA3118)
Description
WINGONEER trademark Reg.NO:4747611Key Features
- Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
- Used the ESS Technology Sabre premier stereo DAC ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Ultra-low-jitter 50MHz clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Used the Texas Instruments ClassD amplifier chipset (TPA3118)
- Up to 2x35w of crystal clear amplification
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Gold-plated RCA connectors
- Volume control knob
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Connects directly to the Raspberry Pi
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- AMP can be enabled / disabled with jumper link
- Powers the Raspberry Pi - no additional power supply
- Duplicated Raspberry Pi HDMI port
- Easy DIY with Raspberry Pi
Specification
- Power supply: 6-24Vdc
- DC Power Plug Size : 5.5*2.5mm
- Input Ports: 1 x HDMI
- Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
- Output Ports: 1 x HDMI, 2 x RCA connectors
- Analog audio output level: 2V RMS
- Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
- Amplifier output Power: 2 x 35w (4 Ohm 24Vdc)
- Size 122mm x 90mm x 90mm
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Packing List
1 x WINGONEER X5000 Expansion board
1 x HDMI bridge
1 x Power switch
1 x Volume control board
1 x Speaker connection cable
8. Geekworm Raspberry Pi 3 Model B+ DAC I2S Interface PiFi DIGI DAC+ HiFi Digital Audio Sound Card + DAC+ Acrylic Case for Raspberry Pi 3 Model B+ / 3B / 2B / B+
Feature
This is a very beautiful dac board, It's suitable for Raspberry Pi 3 Model B+ / 3B / 2B/ B+,No external power supply needed.You can setup a open music player by volumio system.Perfect compatibility raspberry pie official PI HAT size, gold plating process of tall based on PCB board, arc wire (high-end HIFI DAC adopts arc wire), better guarantee the impedance of the signal continuity, reduce the signal reflection and refraction.Provided with an infrared receiver interface.Upgrade DAC chip, using PCM5122 chip of high end, using I2S interface, and can be through the I2C interface to adjust audio volume parameter adjustment; supports 16 to 32 bit audio data format; distortion and dynamic is very ideal, support the tall sampling rate of 384kHz, 112dB dynamic range, degree distortion -93Db.For with no sonic boom run 120dB squelch signal to noise ratio (SNR).soft upward or downward oblique wave and analog squelch.
PCM5122 also integrated negative charge pump, the output without DC blocking capacitor; 2.1Vrms ground center output; ability to suppress very good band noise. Through the load support low to 1K, PCM510xA can drive a plurality of parallel products.
Output ports with gold plated RCV dual terminal and gold-plated 3.5mm Headset seat. The isolated power supply design, make the raspberry pie power supply and DAC part of the independent power supply isolation, and through the bead altogether without mutual interference, get rid of the current sound
Welding free, direct plug expansion board can use, and the use of I2S interface direct decoding digital to analog, non USB DAC interface.increase for double color LED provides state display, red for DAC power indicator (power normal bright), the green light for the working condition of DAC lamp (decoding and bright, stop or does not work out), better understanding of DAC work.(Our WIKI: raspberrypiwiki.com/index.php/RPI_HIFI_DAC%2B_Digital_Audio_Card_SKU:363003)
Description
[Packing List]1 x Dac+ Board
1 x Acrylic Case
1 x Screws pack(for board&case)
[Parameters]
Ready to play: flash it and you're ready
Audiophile Quality: bit perfect playback
FLAC, WAV, MP3, AAC, ALAC, PLS suppor
Music libraries on Samba, NFS and USB drives
Webradios support out of the box
Control it via integrated Webui with PC, Smartphone, Tablet
Airplay capability
Ramplay Support
DSD Native Playback
Multiroom Playback via Android App
Output playback device Selection
Audio out via HDMI, USB, Analog Jack, S/PDIF, I2S (B+)
Wireless Network configuration
Various resampling options, up to 32bit/384khrtz
Root User: root Password: volumio
User: volumio Password: volumio
[FAQ]
If your DAC+ board can not work properly, please follow these instructions:
1. At first, Please check if your DAC+ configuration is right:
http://www.raspberrypiwiki.com/index.php/RPI_HIFI_DAC%2B_Digital_Audio_Card_SKU:363003
Notice: Please remember to reboot the system after you complete and save all the configuration.
2. Please have a check if your audio format is supported .(Such as do not support DTS, AC3,DSD, and other multi-channel audio source formats)
3.If the problem still can not be solved, please try to replace the power supply and power supply cable.
4.When you hear the sound like noise, actually it is not noise, maybe your decoding is not right, so you need to check your configraution. You can try runeaudio or moode.If you still can not solve the problem, please send us the screenshot of your volumio configuration,we will ask for the technician to check for you!
[How to display the Volumio of DAC+]
www.raspberrypiwiki.com/index.php/How_to_display_the_Volumio_of_DAC%2B
[Installation]
Please refer to this website: www.raspberrypiwiki.com/index.php/RPI_HIFI_DAC%2B_Digital_Audio_Card_SKU:363003
9. WINGONEER WX600 Expansion Shield for Raspberry Pi B+/2B/3B, Highly Cost-Effective Audio Hat Which Fits on the GPIO of the Raspberry Pi Model B+, Raspberry Pi 2 Model B
Feature
WINGONEER WX600 Expansion Shield is a highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It uses an HDMI audio solution to give high-definition clear sound quality.It decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card.
The hat supports digital audio 5.1 channel output and 2.0 channel analog audio output, supports Dolby digital AC-3, DTS, LPCM and other digital audio format outputs.
Use your Raspberry Pi as a multimedia player, lossless audio player or a network radio.
Dimensions: 85 x 56mm (Same size as Raspberry Pi); Note: This is not original Raspberry product. It only a substitute accessories from WINGONEER, Know more instructions please contact us
Description
WINGONEER trademark Reg.NO:4747611Feature:
Input Voltage
- 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device.
Audio & Video
- Allows you to extract audio signals from HDMI of your Raspberry Pi.
- Converts HDMI audio to digital optical or Coaxial or stereo RCA analog.
- The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio.
- Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack.
- Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH.
- Maintains surround format when converting to digital optical audio.
- Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input.
- Supports HDMI signal amplification and equalization output for repeater function.
- HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond.
SATA
- Allows you to connect SATA devices to your Raspberry Pi.
Wireless
- Built in IR sensor (38KHz).
Misc
- Power output socket.
- Directly connected on top of the Raspberry Pi using the board GPIO header pins.
- No wiring nor soldering is required.
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards.
- Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!
Packing included:
1x WINGONEER WX600 expansion board
1x USB adapter
1x HDMI adapter
4x Nylon spacers (M3 * 20 mm)
8x Nylon screws (M3 * 6 mm)
10. Inno-Maker RPI USB Audio Card 5V Powered PCM2912 Mini USB Sound Card DAC Decoder and Record Board for Raspberry Pi
Feature
UAC-2919 is A High Quality Audio Card support stereoscopic output and Single channel MIC input,Fit to Debian and Windows system.Adopted the TI PCM2912 Single Chip, USB stereo audio codec with a USB, 2.0-compliant, full-speed protocol controller and an analog front-end (AFE) function for headset applications.
The USB protocol controller works with no software code, but USB descriptors can be modified on request.
Compatilble with Raspberry pi 3 modle B / Pi 2B / B+ / Pi Zero.
Software and Document will be updated accoring to RPI kernelplease download from our website product page or wikiyou can find link from color page
Recent Comments