Best shopsmith table insert for 2022
When it comes to choosing your shopsmith table insert, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best shopsmith table insert. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best shopsmith table insert.
Best shopsmith table insert
1. Fulton Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
Feature
This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
Description
This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications. Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly where there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location. The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process. Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again. The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick2. Table Inserts (pack of 3for 14"band saws or scroll sawsDiameter: 2.5 in, thickness: 0.1 in
Feature
use on 14" Band Saws and 24" Scroll SawsThey fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
Three inserts to protect your expensive blades
Description
Table Inserts (pack of 3).These new, factory fresh inserts are replacements for
use on 14" Band Saws and 24" Scroll Saws.
They are painted aluminum and will not dull your blade,
if accidentally hit. Main diameter is 2-1/2" and 3/32" thick.
The insert sits into a 3/32" recess on the table.
They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
Three inserts to protect your expensive blades
3. Phenolic Table Saw Insert Kit
4. Band Saw Insert 3 Pack for Delta, Imports and Shopsmith Models by Peachtree Woodworking PW1750
Feature
Will fit 14" Delta, Imports and Shopsmith3 inserts per pack
Snap into place replacing your old throat plate insert
Will not dull your saw teeth on your band saw blade
Easy to install
5. Band Saw Table Inserts Solid Aluminum 2-1/2" X 3/32" 2 Pack Fits DELTA ROCKWELL
Feature
Two Aluminum InsertsMeasures 2-1/2 Inch Diameter X 3/32 Inch Thick
Fits Delta, Rockwell, Jet Band Saws with same Plate Dimensions
Close Profile for Clean Cuts.
Aluminum will not Dull the Saw Teeth on your Band Saw Blade.
6. POWERTEC 71086 Zero Clearance Table Saw Insert for Delta Bandsaw Models 5 Pack
Feature
INCLUDES: Zero Clearance Inserts (5 pack)FUNCTION: Reduces tear out and splintering on your work stock, preventing the blade from wandering, while producing efficient and high precision cutting action for your band saw blade
COMPATIBLE: Designed to work with the Delta Bandsaw Table Setups
APPLICATIONS: Best when utilized with thin, small delicate pieces, scroll work, soft wood or fine and detailed woodworking projects
DIMENSIONS: 2-1/2-inch outer diameter, 2-3/16-inch inner diameter; height: 3/32-inch & 3/16-inch
7. RIKON Bandsaw Table Inserts (4 Pack)
Feature
Plastic InsertAll Rikon 14" & 18" Bandsaw except 10-346
Diameter: 2.75
C10-391
8. Shopsmith Allen Screw Table Insert Retaining Bolt Blade Cover Shop Smith Top B31
9. Table Inserts (pack of 2) for 14" band saws or scroll sawsDiameter: 2.5 in, thickness: 0.1 in
Feature
use on 14" Band Saws and 24" Scroll Saws.Table Inserts (pack of 2).Material: Aluminum
They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
Make sure your insert recess has the locating pin on the side , not on the rear
IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt.
If a table alignment pin, , is not tight or missing, (I sell these too), often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
10. 2 Rear Notch Bandsaw Table Insert fits Delta 14 Part 426-02-063-0001 426-02-063-0002
Feature
Table Inserts (pack of 2), new bandsaw aluminum table inserts for Delta 14" (LBS-56) and most import bandsaws.Make sure your insert recess has the locating pin on the rear, not on the side
2&1/2" X .100 thick. Please measure your saw as some Delta & Rockwell 14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.
Fits the following Delta 14"saws: 28-141, 28-200, 28-203, 28-205, 28-207, 28-209,28-216, 28-230, 28-231, 28-240, 28-241, 28-243, 28-245, 28-248, 28-254, 255, 28-262, 28-263, 28-269, 28-270, 28-275, 28-278, 28-280, 28-283, 28-285, 28-290, 28-293, 28-299, 28-300, 328-03, 28-306, 28-345, 28-348, 28-350, 28- 365, 28-366, 28-380, 28-475, 28-651, 28-652, 28-653,28-654,28- 656, 28-662 and others.Interchanges with Delta part number 426020630001
Replaces 426-02-063-0002
Recent Comments