Best resistance meter for 2022
Finding your suitable resistance meter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best resistance meter including detail information and customer reviews. Let’s find out which is your favorite one.
Best resistance meter
1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. Proster LCR Meter LCD Capacitance Inductance Resistance Tester Measuring Meter Self-discharge With Overrange Display
Feature
Proster LCR meterA Special meter to test Capacitance Inductance. Higher reading accuracy degree with liquid crystal display 3 1/2.High Accuracy(Inductance) Measuring accuracy up to (2%+5); (Capacitance) Measuring accuracy up to (2%+5); Forward voltage drop of diode: Displaty forward voltage drop of diode; Forward voltage of DC: Approx.1mA;Reverse DC voltage: Approx.2.8V
Rotable LCD DisplayMulti angle adjustment for easy reading. No need to hold tester while measuring, more convenient operation.
Multi-functionAuto power off; Data Hold; Low Power Indication; ZERO ADJ for Capacitance.
Two test leadsThe black pen is connected to the negative pole and the red test lead is connected to the positive pole
Description
Description:BM4070 is inductance, capacitance and resistance measuring meter.
It is a Special digital instrument which is easy to be operated.
The reading accuracy degree is higher with liquid crystal display 3 1/2.
It adopted double integral A/D converter core and a large-scale integrated circuits.
These make the meter anexcellent performance instrument for the users.
Fetures
1.Display:LCD
2.Biggest display value: 1999 (3 1/2).
3.Measuring method: Double integral A/D conversion.
4.Sampling rate: 3 times per second
5.Overrange display: "1"at the higgest digit
6.Instruction for low voltage of battery
7.Auto power off and Data Hold function
8.Working temperature: 0 to 40
9.Storage temperature: -10 to 50
10.Power: a 9V laminated battery(6F22)
11.Accessory:a instruction manual, a certificate, a pair of crocodile clip and one 9V battery.
Specification:
Accuracy:(%reading+digits)
Quality guarantee: one year
Environment temperature: 235
Relative humidity: <75%
Package:
1x LCR meter
1 pair of crocodile clip
1 pair of small alligator clip
1 pair of LCR meter probes
1x small screwdriver
1x 9V battery
1x user manual
1x Portable bag
3. DROK 3 1/2 Digits AC/DC 8-12V Digital LCD Resistance Meter 0-200 Ohmmeter Ohm Gauge Panel Impedance Tester Detector
Feature
Small Size (794325mm) and light weight(60g), handy and easy to installWorking Voltage:AC/dc8-12v; measuring range:0-199 9; minimum resolution:0 1
No signal input or over the measuring range, the meter will display 1
With reverse connection protection, high stability, accuracy and capacity of resisting disturbance
Note: the meter does NOT support on-line live detection, otherwise, it will be burnt
Description
Features:Operating voltage: AC/DC8-12V
Operating Current:< / = 15mA
Display: LCD, blue back-light, character height 20mm
Dimensions: 79(L) x 43(W) x 25(H) m
Installation hole: 75 x 39.5 mm
Weight: about 60g
Measuring range: 0 -199.9 Ohm
Minimum resolution: 0.1 Ohm
Measurement rate: >/=2 times/S
Zero adjustment: IN + and IN- shorted connection display "000"
No signal input or over range show: 1
Working temperature: -10 to +50 c
Operating humidity: 10 - 80% (non-condensing)
Working pressure: 80 - 106kPa
Sunlight: No direct exposure
Protection: Power supply polarity protection
Note:
please use independent power supply
Multiple tester needs isolation powered
The length of leads please does not exceed 30cm, the diameter more than 0.5 mm
Package includes:
1x Digital Ohmmeter
4. Digital Multimeter MESTEK AC DC Multimeters Current Voltage Auto-Ranging NCV Voltage Tester Amp Volt Ohm Hz Diode Resistance Meter with Battery Electric Test Lead Probes & Alligator Clips for Home Car
Feature
MULTI FUNCTIONS - Reach 1999 counts.Measure the DC voltage, DC current,AC Voltage,resistance, diodes, circuit continuity etc.Durable enough for long term use, test fundamental electric issues of automotive or household appliances, suitable for electrical circuit, home users, enthusiasts, professional electricians and technicians.Can be used for home wiring projects, electronics repair,testing batteries and so on.NCV INDUCTION FUNCTION-Turn the rotary swith to the NCV gear and close to the lead being measured,buzzer will alarm while the backlight will flash when instrument detects AC voltage.
DATA HOLD/BACKLIGHT & FLASHLIGHT-Press the "HOLD" button,the last reading measured on the display will be maintained,you have no need to worry about forget the data you have measured.Independent Flashlight and Backlight humanized design for visibility in dark areas.
SMART DIODE/CONTINUITY & BATTERY VOLTAGE MEASUREMENT-Continuity test and diode measurement are executed in smart mode without the need to switching button.Independent battery measurement function makes it easy to measure battery voltages of 1.5V and 9V.
KEEP YOU AND THE ENVIRONMENTAL SAFE- EN61010-1,-2-030, EN61010-2-032 600V CAT III & ROHS/REACH.We strive to make the BEST Products Possible.If you don't feel 100% satisfied with the product, please contact us and we will do our best to solve all problems.
Description
Electrical tester as a digital multimeter, is widely used in house circuit repairing, in the school, laboratory, factory and other social area.5. Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect
Feature
MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.WITH NCV & LIVE LINE TEST FUNCTION: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
CONTINUITY TEST & OVERLOAD PROTECTION: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
EASY TO USE AND READ: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
YOU WILL GET: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
Description
Specifications:Brand Name: Meterk
Material: ABS
Color: Orange
Safety Class: 600V CAT , pollution class RoHS CE FCC WEEE
Operating Altitude: 2000 meters
Temperature Coefficient: 0.1x accuracy/ (18 or 28)
Max. allowable voltage between terminals and earth ground: 600V DC or 600V AC True RMS
Sampling Speed: approx. 3 times / second
AC Current (A): 40A/400A (3.0%+6)
DC Current (A): 40A/400A (3.0%+6)
AC Voltage (V): 4V/40V/400V/600V (1.2%+10)
DC Voltage (V): 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
Resistance (): 400/4K/40K/400K/4M (0.8%+2), 40M (1.0%+2)
Capacitance (F): 40nF/400nF/4F/40F/100F (3.0%+10)
Hz: 50Hz-100KHz (1%+2)
Duty Ratio: 0.1-99.9% (3%+3)
NCV Test Pencil: 90V AC Voltage
General Characteristic
Display Count: 4000 (3 3/4 LCD)
Auto Range: YES
Max Clamp Opening Size: 26mm / 1.02in
Diode: Around 1.5V
NCV: YES
Diode/Continuity: YES
Frequency/Duty Cycle: YES
Data Hold: YES
Zero Mode: YES LCD Backlight: YES
Overload Indication: shows "OL" on the LCD
Auto Power Off: YES
Continuity Buzzer: YES
Low Battery Indication: YES
Input Protection: YES
Input Impedance for DCV: 10M
Power: AAA 1.5V x 3Included
Safety Rating: CE CAT.III600V RoHS CE FCC
Package List:
1 * Clamp Meter
2 * Test Lead
1 * Storage Bag
1 * User Manual(English + French + German + Italy + Spanish)
6. Neiko 40508 Digital Multimeter
Feature
A portable, general purpose digital volt meter multimeter to test wires, batteries, cells, fuses and other electrical componentsA safe and accurate tool for troubleshooting problems in automotive and household settings
Includes large, easy-to-read LCD screen and accurately measures resistance, current and voltage with maximum reading up to 1999
Red and black leads to test electrical system components including diodes, transistors, wires, fuses
Built-in overload protector keeps the meter from any possible damage
Digital AC/DC millimeter with diode and transistor test function
Checks continuity of wires, fuses and electrical system components
Built-in overload protector keeps the meter from damage
Automatic low battery indicator
Maximum reading 1999
Description
Niko MultiMate makes it easy to check various household and automotive electrical system components.7. ETCR ETCR2100A+ Digital Clamp Ground Earth Resistance Meter Tester 0.01-200
Feature
Boot Time: Self-test in 0.5 second, boot instantlyMeasuring Range:0.01-200
Beep Alarming: Yes
Clamp Size:32mm
Stored Data:99 sets
Description
Specificaiton: Function:Ground resistance test, Loop resistance testPower Supply:6VDC 4 PCS of AA Alkaline batteries
Resistance Range:0.01-200
Resistance Resolution:0.001
Highest Resistance Accuracy:1%0.01
Data memory:99 Sets
Alarm Threshold Setting Range:Resistance: 1-199
Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking
Working Temperature and Humidity:-20-5520RH-90RH
LCD Screen:4 Digits LCD display, Screen LW: 47mm28.5mm
Clamp Size:32mm
Clamp Opening Extent:32mm
Tester Weight:1160g (With batteries)
Clamp Dimension:LWT: 285mm85mm56mm
Protection Level:Dual Insulation
Structural Feature:Clamp CT
Shifting:Automatic shifting
External magnetic field:40A/m
External electrical field:1V/m
Single measurement time:0.5 second
Resistance measurement frequency:1KHz
Measured current frequency:50/60Hz Automatic measurement
Low Battery Indication:Low battery symbol displays when battery is lower then 5.3V
Memory Full Indication:MEM symbol blinks when all 99 sets memory is full
Over Range Indication:Out of range indication "OL", "L0.01" or "OL A"
Auto Power-off:5 minutes after Boot up
Power Consumption:Max 50mA either in booting up or normally working, Continuously working for 30 hours
8. DLG Clamp On Ground Earth Resistance Tester With USB Connection DI-120
Feature
USB Connection for Data Uploading with software applicable in window 2000 / window XP / window Vista / window 7 ( NOT available for window 10 currently)Ground resistance measurements from 0.01Ohm to 1000Ohm with 0.001Ohm resolution
55*32mm jaw size for larger ground rods instead of round jaw
Datalogging with 99 data points
Large size of LCD by 1.8*1.1 inch
Description
- 55*32mm jaw size for larger ground rods - Autoranging ground resistance measurements from 0.01Ohm to 1000Ohm with 0.001Ohm resolution - Configurable alarm value in resistance to support your measurement - Ergonomic mold, full rubber coating for slip proof - Simplifies ground resistance measurements on multiple point ground systems - Verification resistor confirm accuracy of meter - Datalogging with 99 data points - Complete with heavy duty case and verification resistor - Earth Resistance 0.01-1000 - Min. Resolution 0.001 - Configurable Alarm Value of Resistance 0-199 - Memory 99 sets - USB Interface - Conductor Size 2.2*1.3 inch(55*32mm) - LCD Size 1.1*1.8 inch (28*46mm) - Dimension 11.2*3.5*2.4 inch(285*90*60mm) - Weight 1250g9. Tongbao DY1000A Digital Clamp-on Ground Earth Resistance Meter Tester
Feature
Simplifies ground resistance measurements on multiple point ground systemsConfigurable alarm value in resistance to support your measurement
Direct reading of ground resistance from 0.01ohm to 1000ohm with 0.001Ohm resolution
Ergonomic mold, full rubber coating for slip proof
Datalogging with 99 data points
Description
*Main Features
*55*32mm jaw size for larger ground rods
*Autoranging ground resistance measurements from 0.01Ohm to 1000Ohm with 0.01Ohm resolution
*Configurable alarm value in resistance to support your measurement
*Ergonomic mold, full rubber coating for slip proof
*Simplifies ground resistance measurements on multiple point ground systems
*Verification resistor confirm accuracy of meter
*Datalogging with 99 data points
*Complete with heavy duty case and verification resistor
10. Neoteck Auto Ranging Digital Multimeter AC/DC Voltage Current Ohm Capacitance Frequency Diode Transistor Audible Continuity, Multi Tester with Backlit LCD
Feature
Neoteck 2000 Counts 8233D PRO Pocket Digital Multimeter 2000F Capacitance and 200KHz Frequency Measurement, Accurately Measures Current, Voltage, Resistance, and More, Maximum Reading over Time, Auto-ranging and Continuity BuzzerLarge Backlit LCD Display Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
CE Rated Digital Mulimeter with Over Load Protection Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
Nice Protective Orange Shell with Stand Built The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free
Included 9V Volt BatteryThe Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included 2 x Test leads and 2 x Banana Plug to Alligator Clip Cable
Description
All Neoteck Product Comes With 18 Months US Base Warranty
Overview:
Neoteck 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. Is a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with holster that is giving the main body, though downsized, high resistance against the shock of a drop.
Feature:
- Over load protection: Used the PTC protection circuit for Resistance, frequency measurement
- Double Current Fuses. High quality ,More Safety. Meet For Euro Standard.Safety Class: IEC 61010-1, CAT II 600V
- 2000F Capacitance and 200KHz Frequency measurement
- Make Sound of Continuity test more Loudly
- Back Light
- DATA HOLD function
- Low battery indication
- Auto Power-OFF
- Diode test
Specification:
- DC Voltage: 200mV/2V/20V/200V+-(0.5%+2) 600V+-(0.8%+2)
- AC Voltage: 2V/20V/200V+-(0.9%+3) 600V+-(1.2%+3)
- DC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+3)
- AC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+4)
- Resistance: 200ohm/2Kohm/20Kohm/200Kohm+-(0.8%+2) 2Mohm/20Mohm+-(1.0%+2)
- Frequency: 200kHz
- Capacitance:2000uF
- Diode check: Resolution: 0.001V, Will display the forward drop voltage
- Continuity check: If measured resistance less than 100, will buzzer is sounded. Sound loudly ,Easliy to hear
- Power Supply: 9V Battery(6F22) (include)
Package Include:
- 1 x Neoteck 8233D Pro Multimeter
- 2 x Test Leads
- 2 x Banana Plug to Alligator Clip Cable
- 1 x User Manual
- 1 x Box
Recent Comments