Top pony jorgensen clamps for 2022
Finding your suitable pony jorgensen clamps is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pony jorgensen clamps including detail information and customer reviews. Let’s find out which is your favorite one.
Best pony jorgensen clamps
1. Jorgensen Cabinet Master 24-inch 90 Parallel Jaw Bar Clamp, 2-Pack
Feature
This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure.Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp.
Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping.
Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading
Features ergonomic designed 2 component molded soft grip handle.
Description
This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large steel reinforced jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reserved on the bar and the clamp then acts as a spreader.2. Pony 8510BP Cabinet Claw, 2-Pack
Feature
The Cabinet Clawis a unique tool which combines the multiple steps of face frame cabinet installation into one easy processThis product is easy to use easy to install and highly durable
Professional quality installation is achieved at a fraction of the time compared to the use of more conventional clamps
A unique tool which combines the multiple steps of face frame cabinet installation into one easy process
Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position
Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps.
Protective pads protect cabinets from becoming marred during installation
Installs two stiles from 1-1/2 inch to 2 inch width and up to 1-1/2 inch thickness (each) with 4 inch opening capacity
Description
The Cabinet ClawIs A Unique Tool Which Combines The Multiple Steps Of Face Frame Cabinet Installation Into One Easy Process. Using This Clamp, Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened - While The Clamp Remains In Its Original Position; No Removal Or Repositioning Of The Clamp Is Necessary. Professional Quality Installation Is Achieved At A Fraction Of The Time Compared To The Use Of More Conventional Clamps. In Addition, Clamp Faces And Alignment Plate Are Furnished With Protective Rubber Pads To Cushion And Protect Cabinets From Becoming Marred During Installation. Included Is An 1/8" Drill Bit For Pre-Drilling Pilot Hole For Fastening Cabinets Together, Installs Two Stiles From 1-1/2" To 2" Width And Up To 1-1/2" Thickness (Each) With 4" Opening Capacity. Sold In Pairs.3. Jorgensen 24" One Hand Clamp/Spreader - 2-pack, Medium Duty, E-Z Hold Bar Clamps Set
Feature
BASIC PARAMETER- Max opening: 24; Load limit: 300 lbs; Reach: 3-1/3 from edge of bar to center-line of screw; Advancing handle: glass-filled nylon; Bar: 1/4*3/4 plated, round-edge, high-carbon steel.E-Z HOLD II DESIGN- Not only can these versatile clamps be easily converted into a spreader clamps, also allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single clamp.
ONE-HANDED CLAMP- These bar clamps combine the speed and ease of single-handed use. With 3-1/3 inch reach and furnished with soft and durable plastic pads. As a standard, quick-acting, one-handed clamp, the patented, innovative sliding head maintains substantially higher clamping forces.
FEATURES- The contoured comfort grip and quick release lever make it simple to get a firm grip in a flash. The unique in-line advancing handle provides comfort and ease of the use, permits greater travel per squeeze. These unique bar clamps are some of our easiest to use clamps and are ideal for hobby, craft and model projects.
APPLICATION OCCASION- Suitable for a wide range of woodworking.
4. PONY 50 Pipe Clamp, Fixture for 3/4-Inch Black Pipe
Feature
The product is 3/4" Pony Bar ClampEasy to use
The product is manufactured in China
Mounts on any length 3/4 black pipe with both ends threaded (pipe not furnished)
Clamping capacity only limited by length of pipe used
Multiple-Disc-Clutch design which allows a secure hold at any point along the pipe
Clamping faces are approximately 1-3/4 square
Pony Tools makes all PONY Clamp Fixtures with U. S. and foreign parts in our Chicago factory
Mounts on any length 3/4 black pipe with both ends threaded (pipe not furnished)
Clamping capacity only limited by length of pipe used
Multiple-Disc-Clutch design which allows a secure hold at any point along the pipe
Clamping faces are approximately 1-3/4 square
Pony Tools Inc. makes all PONY Clamp Fixtures with U.S. and foreign parts in our Chicago factory
5. PONY 52 Pipe Clamp, Fixture for 1/2-Inch Black Pipe
Feature
Hardened-steel thrust bearing1-1/2-inch square clamp faces
Baked enamel finish for increased durability
Tough clamp for use on any 1/2-inch pipe
Crank-type handle
Hardened-steel thrust bearing
1-1/2-inch square clamp faces
Baked enamel finish for increased durability
6. Pony Jorgensen 38012 Gear Clamp Bar Clamp, 12-Inch, Steel
Feature
This new rugged bar clamp is a 12" Jorgensen Gear ClampThis distinctive design allows for rapid action clamping
With a quick push on the "power bar", the gear clamp develops up to 600 lbs.
Maximum opening capacity is 12 inches
Maximum reach is 3 inches from edge of bar to center line of screw
Maximum opening capacity is 12 inches
Maximum reach is 3 inches from edge of bar to center line of screw
Maximum load limit is 600 pounds
Ideal for do it your selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types
Ideal for rapid action clamping
7. PONY 55 Pro Pipe Clamp, Fixture for 3/4-Inch Black Pipe
Feature
The product is Pony Pro Pipe ClampEasy to use
The product is manufactured in China
Clamping jaws 2-1/8`-Inch
Clamp sits 2-1/2`-Inch above work surfaces
Clamping jaws 2-1/8`-Inch
Clamp sits 2-1/2`-Inch above work surfaces
Mounts on any length 3/4-Inch black pipe
Built-in clamp stand, longer screw and built-in clamp hanger
Wider and taller stance, taller and wider jaws
8. Jorgensen 2-pack Medium Duty Steel Bar Clamp Set, 24-inch
Feature
BASIC PARAMETER- Max opening: 24; Load limit: 600 lbs; Reach: 2-1/2 from edge of bar to center-line of screw; Bar: 1/4x3/4 plated, round-edge, high-carbon steel; Screw: 3/8 diameter cold-drawn steel with special, smoothly cut U.S.S. threads; Swivel: 3/4 diameter, plated steel, ball-and socket type.SLIDING-HEAD DESIGN- The sliding head is threaded to accommodate the screw. All adjustments are made in the moveable sliding head, making this style fast-acting, easy to open and close and suitable for close quarters clamping. Strong, light-weight steel bars are rust-resistant. Multiple-Disc-Clutch holds securely at any point along the bar.
MATERIALS- Our clamps are proudly made using high quality materials for lasting value and great performance. Strong, lightweight steel bars are rust-resistant.
FEATURE- Rust resistant zinc plated steel bar; Sliding head with multiple disc-clutch holds work securely; New comfort grip handle with fast moving screw.
APPLICATION OCCASION- Suitable for a wide range of woodworking. Steel bar clamps are used by professional cabinet makers, carpenters, woodworkers, metalworkers, and with confidence by the doit-yourself homeowner on weekend projects.
9. Jorgensen 6" Spreader/Bar Clamp Set, 4-pack,One-Hand Light Duty E-Z Hold Clamp/Spreader, 99216A
Feature
BASIC PARAMETER - Throat Depth : 2-3/8 from bar top of pad; Maximum opening capacity: 6; Normal load limit: 150 lbs. Bar: 1/8*1/2 plated, round-edge, high-carbon steel; Advancing handle: glass-filled nylonLight-duty E-Z hold design - the E-Z hold design allows clamp to be used in two ways - clamp or spreader. Not only can these versatile Clamps can be easily converted into a spreader Clamps, feature our exclusive patented feature that allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single Clamp
One-handed Clamp - as a standard, quick-acting Clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides Comfort and ease of the use, permits greater travel per squeeze
Features - these bar clamps combine the speed and ease of single-handed use. With 2-3/8 inch reach and furnished with soft and durable plastic pads
Applications occasion - suitable for a wide range of woodworking & DIY projects
10. JORGENSEN 4-pack Steel Bar Clamps Set, 6-inch & 12-inch Medium Duty, 600 Lbs Load Limit
Feature
Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
Recent Comments