Top pin backs locking rubber for 2022
Finding your suitable pin backs locking rubber is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pin backs locking rubber including detail information and customer reviews. Let’s find out which is your favorite one.
Best pin backs locking rubber
1. SUBANG 40 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
Feature
Spring Loaded fastener for easier on-off action without need a toolPackage: 40 Pieces pin keeper lock with 1 storage case. Keep your lock pins safe
Size: 1 cm in diameter, 0.6 cm in height
Material: nickel-plated copper
Great for pins,name tags.etc
Description
Feature:
This listing is for 40 PCS Low Profile Locking Pin backs/Pin Keepers-Highest Quality, Best Available; Suitable for all pin post pins, especially for disney pins, harley pins;
Great alternative to those standard butterfly clutches and the rubber backs; These pin backs are very easy to use; No Tools Required; Just push on the pin back to the pin nail and it is locked; the harder you pull the pin, the tighter it will lock; pull the spring loaded botton at the rear, then the pin will be released ! Low Profile, smooth surface, No finger stabbing, No pin post protruding any more!
Specification:
Material:Material: nickel-plated copper
Product Size: circumference approx 15cm/5.9 inch(unstretched);
Product weight:0.04 ounces*40
Package size:3.22*2.36*0.59inches
Package weight: 2.41 ounces
Package includes:
- 40* Locking pin keepers backs
- 1* Storage case
2. 50PCS Metal Locking Pin Backs, Pin Keepers Locking Clasp, Badge Insignia Pin Backs Replacement (Silver)
Feature
Small Size: Pin backs diameter is 11mm, 7 mm in height. Sturdy and light, lock pins firmly and keep them secure.High Quality Material: Made of durable nickel-plated copper. Put the pin in the metal pin backing, your items will keep pinned securely.
Easy to Use: Butterfly clutch with spring fastener slices allow you easy to install and remove, handy and convenient for use.
Widely Applicarion: Pin clutch backs good for all lapel pins, tie tacks, badge insignia, citation bars and jewelry replacement.
Package: Pack in the metal box easy to carry, including 50pcs pin backs, keep your brooch/ badge safe.
3. 50pcs PVC Rubber Pin Backs Butterfly Clutch Backings Pin Cap Keepers Replacement for Uniform Badges Comfort Fit Tie Tack Lapel Pin Backing Holder Clasp, Black
Feature
Size: 11mm/0.433inch in diameter, 7mm/0.276inch in height; Color: Black; Quantity: 50pcs pin backs(WITHOUT PINS)Made in PVC rubber, these soft rubber pin back provides good grip of pin, keep it stay in place
Use for lapel pins, tie tacks, citation bars, service bars and jewelry, good for jewelry making and DIY craft projects
Great replacement for pin clutch backs, these rubber pin backers are a must-have for your uniform, holding badges or name tags
The PVC pin back is tight and they are not easy to fall off
4. Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)
Feature
Material: the small clutch is made of quality nickel plated brass; Unnoticeable while lock pins firmly and keep them secure; Metal material makes it anti-wear, sturdyPackage contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage; Quantity are enough for replacement to your torn or lost one
Exquisite design:clutch pin backs are great match for most metal pin; clutch provides good grip of pin to keep it stay in place; With its firm and protective grip, rest assured that you will never lose another pin again
Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off; Simply push to secure onto pin post and pull the trigger while holding onto your pin to release; These locking pin backs are a great alternative to rubber clutches
Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins; Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc.
5. eBoot 30 Pieces Golden Locking Pin Keepers Backs, No Tool Required
Feature
Spring loaded fastener for easier on and off, no tools requiredSize: 1 cm in diameter, 0.5 cm in height
Fit for diameter 1.0 mm - 1.1 mm pins
Material: copper; Color: golden
Good for pins, name tags, etc.
6. Shapenty Clutch PVC Rubber Pin Backs Keepers Replacement Uniform Badge Comfort Fit Tie Tack Lapel Pin Backing Holder Clasp (Black, 30PCS)
Feature
Material: PVC Rubber; Color: Black.Size: 10mm in diameter, 7mm in height.
Use for lapel pins, tie tacks and jewelry.
Great replacement for pin clutch backs.
Good for jewelry making and DIY craft projects.
7. Lapel Pin Backings,Butterfly Clutch Pin Backings PVC Rubber Pin Backs Pin Keepers for Replacement Uniform Badge (Black, Pack of 50)
Feature
Nice packing-Rubber backs are packed in a transparent plastic box,Each box contains 50pcs rubber pin backers. Pin Locks suits for lapel pins, badges, hat, tie tacks, name tag, toy pins, citation bars,etc.Super practical-These PVC rubber pin backs are totally awesome! because they keep the pin from moving around.The soft rubber pin back effectively isolate sharp metal pins and ensure they remain in placeGreat replacement for pin clutch backs.
If you wear lapel pins on the reg. Throw away the metal backs that don't grip and replace them all with these rubber backs that won't fall off, leaving your pin lost on the ground somewhere. They have great grip, and don't loosen with time.
the PVC pin back is tight and they are not easy to fall off; Each pin back has a hole which is compatible with the tie tack pinThe rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim.
Put the pin in the rubber pin backing, your items will keep pinned securely. With smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature.If there is any problem or these Pin backings does not fit your, just contact we will return full refund to you.
8. 30 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp
Feature
High Quality Material : These pin backs locking clasps are made of nickel-plated copper,which is durable and sturdy.It can lock your pins firmly to keep them secure .Multi-function : These mental pin backs are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, etc.
Easy to use : It is easy on-off action, spring loaded fastener simply need you to push to lock them, then push on the base to secure them ,finally pull to loosen the lock and remove it .
Reasionable Pin Size: The size of the pins is 1 cm/0.39 inch in diameter, 0.6 cm /0.24 inch in height.It is convenient to carry
Satisfaction Guarantee: We sincerely provide you with good enough products and services. If you are not satisfied with the product, please contact us, we will try our best to help you solve it.
9. Pin Backs, Selizo 84pcs Locking Pin Backs Lapel Push Pin Keeper Blank Pin Locks for Disney Pins, Lapel Pins, Enamel Pins, Brooch Pins and Hat Pins (Assorted Styles)
Feature
QUANTITY: Selizo pin backs set comes with totally 84 pieces of locking pin backs in 3 different styles and colors, different styles and colors to fit all kinds of lapel pins, enamel pins, brooch pins and hat pinsASSOTEDD STYLES & COLORS: The pin backs locking set are in 3 different styles: metal push pins, metal butterfly clutch pin backs and rubber pin backs. The metal pin locking backs are in gold and silver colors, while the rubber pin locks are in black color. Provide you a nice selection to fit your different needs
EASY TO INSTALL & REMOVE: These lapel pin backs are easy to put on and take off without any tools. For the metal pin keepers, simply pull up the enamel pin back to secure onto and remove. For the butterfly clutch pin backs, push the trigger to secure onto and release
HIGH QUALITY PIN BACKINGS: The metal brooch pin backs are made of durable copper material that are strong and sturdy to hold and hard to break. While the rubber blank pins are made of PVC rubber that are durable and comfortable to use
WIDELY APPLICATIONS: Our pin holder set are great choice to use with brooches, name tags, hat pins, pin badges, lapel pins, enamel pins, homemade craft pins, toy pins, citation bars, service bar, etc. They also can be used for holding tie tacks and display books
10. YG_Oline 300 Pcs Black Rubber Pin Backs Lapel Pin Backs Pin Backings Locking Pin Backs Clutch Pin Backs Pin Back Replacement for Brooch Tie Hat Badge
Feature
The rubber pin back is used to fix the pin head.Made of rubber, black.
The diameter of safety pin fixing back is 11mm, and the height is 7mm. It is suitable for safety pin with a thickness of about 1mm. The pin is too thin to be fixed easily.
For jewelry making, DIY, lapel pin, tie pin, hat pin, badge pin, toy pin, brand pin, etc.
The package contains 300 pcs black rubber pin back, enough for daily use.
Recent Comments