Top pcie oscilloscope for 2022

If you looking for pcie oscilloscope then you are right place. We are searching for the best pcie oscilloscope on the market and analyze these products to provide you the best choice.

Best pcie oscilloscope

Product	Features	Go to site
	Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey	Go to amazon.com
	Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable	Go to amazon.com
	RioRand PP150 100 MHz Oscilloscope Clip Probes with Accessory Kit (Pack of 2)	Go to amazon.com
	Hantek DSO5072P Digital Oscilloscope, 70 MHz Bandwidth, 1 GSa/s, 7.0" Display	Go to amazon.com
	Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator	Go to amazon.com
	kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K (SMD pre-soldered)	Go to amazon.com
	Hantek DSO5102P USB Storage Oscilloscope Oszilloskope 2 Channels 100MHz 1GSa/s	Go to amazon.com
	Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder	Go to amazon.com
	WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display	Go to amazon.com
	MakerFocus Digital Oscilloscope Handheld Portable Mini Oscilloscope 5012H with 2.4" 320240 LCD Display Screen 100MHz Bandwidth and 500MS/s Sampling Rate for Electronics DIY and Equipment Debugging	Go to amazon.com

Related posts:

1. Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey

Feature

200 mhz bandwidth
Real-time sampling rate up to 1 gsa/use
IRecord length up to 14 Mpts
Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
1M points fft

Description

200Mhz, 1Gsa/s, The SDS1202X-E Series employs a new generation of Spo technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It has a minimum vertical input range of 500 UV/Div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400, 000 frames/sec (sequence mode). it also employs a 256-level intensity Grading display function and a color temperature display mode not found in other models in this Class. Siglents new oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, can, LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1M points FFT math function that gives the sds1000x-e very high frequency resolution when observing signal Spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and high performance of the sds1000x-e Series cannot be matched else anywhere at this price.

2. Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

Feature

Slot color is sent randomly:Due to the shortage of raw materials, we have purchased the 2 color card slot for production, randomly send, it does not affect the riser's function.
More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
LED indicator and fuse are used on the board: Indicates the connection status between your devices.
3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.

Description

Features:

1. Multi-interface: 4PIN, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
2. LED indicator and fuse are used on the board: Indicates the connection status between your devices
3. Added coil to prevent interference?Long time work will produce electromagnetic waves, affecting transmission?This special coil unit absorbs this electromagnetic wave.
4. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices.
5. No drivers needed.
6. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
7. Board dimensions: 13cm x 3cm x 1.2cm

Package includes:

• 6x PCI-E 16X riser board
• 6x PCI-E 1X adapter card
• 6x 60cm USB 3.0 riser cable
• 6x Ubit Hook Cable Ties

About after-sales?

• For 30 days andany quality problems?We provide after-sales service for free

3. RioRand PP150 100 MHz Oscilloscope Clip Probes with Accessory Kit (Pack of 2)

Feature

Bandwidth: 100MHz
Attenuation: x1/x10
System input resistance,10M / 1M, typical input capacity 85-115pf / 18.5-22.5PF
Max. Voltage: x1: <200V DC + peak AC, x10: <600V DC + peak AC
Compensation range 15-40 PF, tip/head style: 5 mm

4. Hantek DSO5072P Digital Oscilloscope, 70 MHz Bandwidth, 1 GSa/s, 7.0" Display

Feature

200/100/70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc

5. Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator

Feature

2.4MSa/s, 12bits;
DAQ card function;
Cost-effective 8 channels oscilloscope for vehicle testing;
8 channels programmable generator which can analog signals of crankshaft, camshaft etc.

6. kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K (SMD pre-soldered)

Feature

Update From kuman 13803KThe sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div
More Applications Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications.
Rotary encoder has been added It makes parameter adjustment much quicker and easier.
DSO Shell comes with full enclosure The front panel and top/bottom brackets are flexible for easy user modification.
Detailed InstructionDetailed assembly instructions are provided in combination with troubleshooting guide and schematic.

7. Hantek DSO5102P USB Storage Oscilloscope Oszilloskope 2 Channels 100MHz 1GSa/s

Feature

100MHz bandwidths
1GSa/s Real Time sample rate
Record length up to 40K
Multiple automatic measurements

8. Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder

Feature

100Mhz, 4 channels, 1Gsa/use, 1Mpts fft
Standard decoder: iic, spi, uart/Rs232, can, lin
16 digital channels (mso) (four channel series only, option)
USB AWG module(four channel series only, option)
USB WIFI adapter(four channel series only, option)
NOTE: Refer User guide included along with the product before use

9. WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display

Feature

With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (not include), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display
Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value; Adopts ARM Cortex-M3 processor (STM32F103C8)
Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error
Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate
Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave

10. MakerFocus Digital Oscilloscope Handheld Portable Mini Oscilloscope 5012H with 2.4" 320240 LCD Display Screen 100MHz Bandwidth and 500MS/s Sampling Rate for Electronics DIY and Equipment Debugging

Feature

Use Manual - https://drive.google.com/open?id=19XR-Piu3N-zBmjkcav9KegYY5z-WbBgx; With 100MHz analog bandwidth and 500MS/s sampling rate (1X=5MHz, 10X=100MHz). Complete triggering function (single, normal, automatic).
This 5012H oscilloscope is a versatile, highly practical, cost-effective handheld oscilloscope for the maintenance industry and the R&D industry with real-time sampling rate of up to 500MS/s and 100MHz analog bandwidth.One-button Waveform Storage - Built-in 64M storage space, maximum storage of 2000 waveform pictures. Built-in 3000mAh rechargeable lithium battery, fully charged for 12 hours of continuous use.
Intelligent Anti-Burn - 1X can withstand up to 600V withstand voltage. Display high-definition LCD screen with 2.4 inch 320*240 resolution. Ultra-small size, easy to carry, with anti-slip and anti-drop silicone sleeve.
Powerful Waveform File Manager - Supporting for thumbnail browsing, viewing, detail viewing, page turning, deletion and more. Memory compression technology, waveform refresh screen does not flicker. The screen brightness can be adjusted.
Application: Electronics DIY, appliance repairing, car repairing, equipment debugging, scientific research and education and product development.

Conclusion

By our suggestions above, we hope that you can found the best pcie oscilloscope for you. Please don't forget to share your experience by comment in this post. Thank you!