Best filament sensor ender 3 pro for 2022
When it comes to choosing your filament sensor ender 3 pro, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best filament sensor ender 3 pro. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best filament sensor ender 3 pro.
Best filament sensor ender 3 pro
1. Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer
Feature
Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracketIndependent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique; Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly.
Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO)
2. Official Creality Ender 3 V2 Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender3 MaxEnder 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard
Feature
High Compatible Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro /Ender 3 MAX/Ender 5 Plus/ CR-10S PRO/ CR-10 V2 V3 with 32 bit V4.2.2/V4.4.7. Only Ender 3 Series need to replace extruder bracket.Smooth filament travelling The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
Precise Detection Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
Upgraded DesignIt is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
After Sales ServiceCreality pays great attention to the buyers user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
3. BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board
Feature
Auto Filament Runout SensorSmart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament.High Compatibility for Multiple DisplaysBreak detection sensor can support 2004LCD,12864 LCD. W hats more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH.
Two Extrusion Can be RealizeSupport remote and direct two extrusion ways and 1.75mm diameter filament.
What Control Boards Can be Compatible with The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/MKS GEN L control board.
Firmware Modification Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer.
4. Creality Ender-3 S1 Pro 3D Printer Ender-3 S1 Upgrade with 300C High-Temperature Nozzles PEI Spring Steel Plate LED Light Sprite Direct Dual-Gear Extruder CR Touch Automatic Bed Leveling
Feature
300C High-temp Nozzle:The brand new nozzle made of brass can stand up to 300C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.Spring Steel PEI Magnetic Build Plate:Ender-3 S1 Pro has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed mdel effortlessly with just a slight bend.
4.3-Inch Touch Screen & LED Light:The 4.3-inch touch screen, supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes. The equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.
"Sprite" Full-metal Dual-gear Direct Extruder:The "Sprite" full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments, especially the flexible TPU.
CR Touch Automatic Leveling:Equipped qith CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good effeciency saves much time.
5. Official Creality Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor High Precision 8.6x8.6x10.6inch
Feature
Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning.CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed.
Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface.
Ultra-Quiet 32 Bit Motherboard The brand new 32-bit silent board runs at low decibel levels (below 50dB) and significantly reduces noise, so you can enjoy 3D printing.
High-precision dual Z-axis for higher printing precision With a dual Z-axis leadscrew & Z-axis dual-motor design, the Ender 3 S1 works smoother and more in sync, reducing lines and edges on the sides of your print to improve print quality.
6. 3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
Feature
It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
7. Casnorton Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender 3 V2, Ender3 MaxEnder 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard
Feature
Compatible Models: This 3D printer filament detection device sensor kit is compatible with the Creality Ender 3 V2 3D printer.Independent modularized design: It has been redesigned with new internal structure. The outer cover is frosted, the manufacturing is stylish and unique.
Precise detection: the blue LED indicates normal filament feed and the blue LED goes out when the filament runs out
Smooth Filament Travel: The Ender 3 V2 filament breakage detection device contains a microswitch, which uses the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
Package includes: filament detection * 1; Mounting plate * 1; Filament wire * 1, special design, easy to install and use
8. Creality 3D Pad with 5 HD LCD Touch Screen with Filament Runout Sensor, Power Loss Resume Print, Animal Texture and 11+ Languages for Ender 3/3 / V2 / Pro / 5 / Pro/CR-10 + All FDM 3D Printers
Feature
Huge Compatibility Range This stunning plug and print touch pad has an integrated TF driver, U disk driver and Gcode parsing. The 3D touch pad is also compatible with all FDM printers using marlin firmware such as the Ender 3 / Ender 3 V2 / Pro / Ender5 / Pro / Plus / CR-10 and many more. It also supports 11+ LanguagesModel PreviewThe 3D Pad also has a Gcode file preview available as well as a custom slicing software for you to see the printing models easily, preventing errors in selecting print files and showing a more intuitive printing progress, Moreover, it boasts a high sensitivity capacitive multi touch screen for ease and a user friendly display system.
Power Loss Resume The 3D Pad comes with a power loss resume feature meaning that even if the printer loses power, you will be able to resume the print once you turn it back on. On top of that, the 3D bad also has an on board filament runout sensor feature which detects when the filament has run out and then makes the printer pause the print and park the nozzle, allowing you to change filament and then resume the print.
Animal TextureThe 3D pad also has an animal texture without having to slice the models. With one touch of the screen you can add this lifelike effect to any of your animal prints. Other features include a Si-Fi Cyberpunk UI graphics and future updates will allow users to customize the UI. The 3D pad also has a powerful data caching feature that in the event of the TF card / U disk being disconnected, gives users a 20-40 second buffer time to connect it again without the print failing.
Customer Support F1RST LAYER is an authorized distributor for Creality. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! All products in this bundle are genuine from the factories in Korea and China. Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you.
9. 3D Printer Parts Filament Detection Module Detector Sensor Switch Run Out Pause Monitor for Creality Ender 3 V2/CR-10 V2/V3 /Ender 3 Max
Feature
Smart module for detecting the status of the filament.This 3D printer filament detection device sensor kit is compatible with the Creality Ender 3 V2 3D printer.
Independent modularized design: It has been redesigned with new internal structure. The outer cover is frosted, the manufacturing is stylish and unique.
Precise detection: the blue LED indicates normal filament feed and the blue LED goes out when the filament runs out.
Smooth Filament Travel: The Ender 3 V2 filament breakage detection device contains a microswitch, which uses the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
10. BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Black)
Feature
Function of Filament Detection ModuleTo detect Filament in 3D printer run-out,pause detection, it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material.Filament Break Detection Module When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed.
Detection MethodThe material detection module uses the level jump detection method.
Filament SizeIt Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved.
After-Sales GuaranteeWe support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request.
Recent Comments