10 best fc to lc single mode for 2022
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 fc to lc single mode. Its followed by an in-depth review of each fc to lc single mode. Hopefully, once you are done reading this article, you will be well informed about fc to lc single mode and be able to select the right fc to lc single mode for you without any hesitations.
Best fc to lc single mode
1. FiberCablesDirect - 1M OS2 LC SC Fiber Patch Cable | 10Gb Duplex 9/125 LC to SC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1gb 10gb smf dup sfp 10gbase lr er Yellow ofnr sc-lc
Feature
Fiber Cable Description: OS2 LC to SC Fiber Patch Cable 1 Meter | 10Gb Single Mode Fiber Patch Cable with 9/125 Corning optical fiber glass. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications.Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), yellow PVC jacket, 2.0mm outer diameter, zip-cord reinforced, SMF (Singlemode Fiber) patch cables / jumper cords.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. SFP, audio, video, data services supported. ISO / IEC 24702
Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority.
2. Single Mode 9/125um FC/UPC Male to LC/UPC Female Hybrid Optic Optical Fiber Adapter Adaptor Connector for Optical Power Meter
Feature
Fiber Type SM-9/125um FiberIns.L: less than 0.3dB Re.L: greater than 45dB
3. LC to LC Fiber Patch Cable Single Mode Duplex - 1m (3.28ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series
Feature
Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services.This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.
This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm.
This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20C to +70C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors.
4. PacSatSales - Fiber Optic Patch Cable - Single Mode - SIMPLEX - OS1-9/125um (1M, FC to LC)
Feature
COMMERCIAL GRADE CABLES - Our Industry proven 1 Meter FC-LC Single mode Fiber patch cable range are perfect for the demands of Fiber Professionals.QUALITY RATED - This 1M / 3.3ft FC/LC Singlemode fiber meets all UL, cUL, IEC & RoHS standards. Our SM SX fiber patch cables are OS1 9/125 - ideal for all Single-mode fiber networks including CATV type FTTH, FTTB & FTTP systems.
RELIABLY TESTED - Every Optical fiber cable is tested for insertion loss to ensure a high quality end product. We rely on these network patch cables for use within our clients fiber networks across the USA.
PRODUCT DETAILS - Connector FC LC. Mode: 9/125m. Wavelength: 1310nm to 1550nm. Jacket Material: PVC (default)/LSZH/OFNP. Jacket Color: Yellow. OD: standards 2.0/3.0 (default)/0.9/3.0mm
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems.
5. Jeirdus 2Meters 6ft LC to FC Duplex 9/125 Single-Mode Fiber Optic Cable Jumper Optical Patch Cord LC-FC
Feature
2 MetersmLC/PC-FC/PC,Duplex,SinglemodeCompatible with all standard fibre optic equipment and connectors
Ceramic connectors ensure low signal loss, and high reliability
6. Jeirdus 3Meters 10ft LC to FC Duplex 50/125 10G OM3 Multi-Mode Fiber Optic Cable Jumper Optical Patch Cord LC-FC
Feature
3 Meters,LC/PC-FC/PC,Duplex,OM3,Multimode,50/125,3.0mm DiameterCompatible with all standard fibre optic equipment and connectors
Ceramic connectors ensure low signal loss, and high reliability
7. FiberCablesDirect - 2M OS2 LC LC Fiber Patch Cable | Simplex 9/125 LC to LC Singlemode Jumper - 2 Meter (6.56ft) | Length Options: 1-3M | Single-Strand Jumpers smf smplx lc/lc Yellow ofnr PVC lc-lc
Feature
Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 2 Meter | Simplex (1 fiber strand) Single Mode fiber optic patch cable, 9/125 Corning optical fiber glass, yellow OFNR Riser Rated PVC jacket, 2.0mm outer diameter, zip-cord reinforced. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications.Fiber Patch Cable Details: 2 Meter (6.56 feet), Simplex, 2.0mm Outer Diameter, Zip-Cord Reinforced, SMF (Singlemode fiber) Patch Cables / Jumper Cords.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702
Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority.
8. FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc
Feature
Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 1 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications.Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702
Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct.
9. FiberShack - Fiber Optic Couplers and Adapters - ST, SC/APC, FC, UPC - Single-Mode - OS1-9/125um. (LC to LC 20 Pack Tin)
Feature
PROFESSIONAL GRADE - Like us, you probably need a reliable source of single mode Fiber optic couplers and connectors. That's why we stock a range of ST, LC, SC, FC, FC/APC, SC/APC Coupler options. Our Fiber optic connectors will make quick work of any cable extension you need to make.PROVEN PERFORMANCE - Our Optical Couplers and Adaptors are ideal for any singlemode, simplex or duplex application, coupling any LC patch cord. Our couplers will deliver top performance to your network.
CERTIFIED AND TESTED - Our products meet all UL, cUL, IEC & RoHS standards. Pacsat patch cables are Ideal for all fiber networks including CATV type FTTH, FTTB & FTTP systems. Every coupler is pre-tested to ensure a consistent high quality end product.
CLEAN AND READY TO USE : All products are polish cleaned and dust cap covered. Reduce your time and cost when cleaning dirty fiber connections.
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand of high spec suite of fiber optic products for all fiber optic systems.
10. Single Mode 9/125um FC/APC(Male) to LC/APC (Female) Optical Fiber Hybrid Adapter FC-LC
Feature
This is a FC 2.5mm to LC 1.25 adapter for visual fault locator.It fits all 2.5mm size hole, it means all manufacturers out there.
It simply plug to the 2.5mm hole to convert it to a 1.25 hole.
Connection type: LC / APC to FC / APC
Adapter Type: Single mode 9/125 Fiber
Recent Comments