Top 18 extractor fan for smoke for 2022
What are criterias of the best extractor fan for smoke? It is not easy to find the answer. We spent many hours to analyst top 18 extractor fan for smoke and find the best one for you. Let’s find more detail below.
Best extractor fan for smoke
1. Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan
Feature
The Powerful Remove Fume Extrator and handy carrySturdy Aluminium alloy material
Long-lasting working time for over 50,000 hours
Easy to replace filter
Great for electronics, arts and crafts, and stained glass work
Description
Kulannder DIY working Fan believed in handy carry and sturdy Solder Smoke Absorber, also can use a cooler fan on working table. It's easy to DIY operating by yourself, just soldering, drivepipe and lock the screw, then finish a best and useful DIY Remover Fume Extrator or a cooler working fan.
NOTES:
1, The best working position: the distance between Solder point and Fans no more than 20cm.
2, Don't constant working over 24hours.
Features:
1, Power consumption: 30W
2, Maximum air flow: 2000ml/min
3, Working temperature: -30 to 70 degree
4, Lifetime: 50,000 hours
5, Certification: ULCULCCCCE TUVtuvEMCROHS
6, Weight: 1.3lb
7, Size: 8.8'*6'*2.4'
2. Aoyue AO486 486 Benchtop Solder Smoke Absorber
Feature
Great for electronics, arts and crafts, and stained glass workQuiet yet powerful operation
Activated carbon filter
ESD-safe
Description
It's time to breathe easy! This bench top fume extractor removes soldering smoke and fumes quickly, safely and efficiently. Great for electronics, arts and crafts, and stained glass work.Quiet yet powerful operation. Approx 37 cubic feet per minute airflow Activated carbon filter absorbs up to 80 percent of the odors from the air and is easy to replace ESD-safe by design Approx. 5"x5" filter area Unit measures Approx. 11"h x 8"w x 6"d One Extra replacement filter included.
3. Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health
Feature
The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.Sturdy Aluminium alloy material and long-lasting working time.
Super easy to set up and easy to replace filter.
Portable and low noise, quiet and high-efficient fan.
ESD safe, great for electronics, arts and crafts, soldering station work.
Description
Kulannder adjustable solder smoke absorber is ideal for absorbing toxics, the filter consists of foam and activated carbon.
Features:
-Power consumption: 30W
-Maximum air flow: 2000ml/min
-Working temperature: -30 to 70 degree
-Lifetime: 50,000 hours
-Certification: ULCULCCCCE TUVtuvEMCROHS
-Weight: about 2.65lb
4. YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Specifications:- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package includes:
- 1x soldering absorber
- 1x back cover (for connecting pipe)
- 1x manual
5. Zinnor Solder Smoke Absorber Bench Top Solder Smoke Absorber Exhaust Fan, Activated Carbon Filtration, Silent, 16W (Shipping US)
Feature
[Low Noise]: The solder smoke absorber adopts a quiet and soft design with low noise to create a quiet and comfortable environment for you.[Adjustable Angle]: The angle of the fan can be adjusted, and the omni-directional powerful smoke can be collected.
[High-efficiency Filtration]: The solder smoke absorber has an activated carbon filter that can effectively absorb toxic gases and provide a safe working condition.
[Can be connected to the exhaust pipe]: You can install the rear cover, connect the exhaust pipe to use, you let you more choices.
[Transportation]: This solder smoke absorber is delivered directly from the US warehouse. The transportation speed is fast and can be delivered within 3-5 days. If you have any questions about the product, you can contact us at any time.
Description
When soldering components, the tip of the soldering iron comes into contact with rosin and generates a lot of white smoke gas.These poisonous gases are not only pungent, blinking, but more importantly threaten the health of maintenance personnel.
Prolonged inhalation of these toxic gases can cause headaches, dizziness, vomiting, and eye diseases.
This type of soldering smoker is exquisite and compact, with strong wind power, and it is suitable for small maintenance workbenches.
When used, this fan only needs to be protected from the front of the iron tip. Toxic smoke will be quickly removed and it can also be used to cool down.
🌵Feature:
1. The filter consists of foam and activated carbon and is very suitable for the absorption of toxins.
2. Adjustable absorption angle.
3. Low noise, high efficiency fan.
4. Use antistatic materials.
5. Activated carbon filter can be replaced.
🌵Specification:
Main:
Power supply: AC110, 60Hz
Power consumption: 16W
Inlet concentration: 2(mg/L)
Dimensions: 8.7 x 10.6 x 6.6 in
Activated -- Carbon filer:
Size: 5.1 x 5.1 x 0.4 inch
Amount of activated carbon filter: 7g
Max. Absorbing weight of components per one filter: 2g
🌵Package includes:
1*soldering absorber
1*manual
🌵Note :
Dear friend, if you have any question about the product, please contact us before leaving the feedback, we will deal with the issue immediately and carefully until you are satisfied.
6. 1000l Adjustable Solder Smoke Absorber Remover Fume Extractor Carbon Filter Quiet Fan for ESD Soldering Station
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Features:- The filter consists of foam and activated carbon, Which is ideal for absorbing toxins.
- Adjustable absorbing angle.
- Low noise and high- efficient fan.
- Made of antistatic material.
- Easy to replace filter.
Specification:
- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package contents:
- 1x soldering absorber
- 1x manual
7. Solder Smoke Absorber Remover Fume Extractor Air Filter Fan ESD Soldering 1000L
Feature
Power supply: AC120, 60Hz , Power consumption: 30WMaximum air flow: 1000L/min , Inlet concentration: 2(mg/L)
Dimensions: 8.7 x 10.6 x 6.6 in , Weight: 2.33lb
Activated -- Carbon filer: , Size: 5.1 x 5.1 x 0.4 inch , Amount of activated carbon filter: 0.02lb
Max. Absorbing weight of components per one filter: 0.004lb
Description
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Package contents: 1x soldering absorber , 1x manual
8. 6 Pack Solder Extractor Filter Carbon Filter Replacement Activated, Smoke Fume Absorber Filter for Hakko/Xytronic/Aoyue Smoke Absorber 5 1/8 5 1/8 3/8
Feature
Kulannder extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.How often should replace your carbon filter? Normally activated charcoal filters should last 4-5 months should replace a new filter.
This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.etc.
Enough quantity and size: totally 6pcs carbon extractor filter, each carbon filter dimensions are 130mm*130mm*10mm(5 1/8" * 5 1/8" * 3/8")
Extractor filter only, not include smoke absorber!
Guarantee and Warranty: any quality issues, just contact us for refund or replacement.
Description
Product Description:Kulannder 6 Pack extractor carbon filter replacement activated carbon filter for Hakko corporation 493, FA-400, Xytronic 426DLX and 456DLX, and Aoyue 486 bench top smoke absorber.
Size:
each carbon filter dimensions are 130mm*130mm*10mm(5 1/8" * 5 1/8" * 3/8")
Weight:
totally about 3oz
Quantity include:
6pcs carbon filter
9. Weller WSA350 120v Bench Top Smoke Absorber
Feature
Great for workspaces using more active fluxesRemoves flux fumes from soldering workbench
Fumes are absorbed by the replaceable carbon-activated filter
Includes one replacement filter (WSA350F), ESD safe
Fan is quiet and will not add significant noise to the workspace
Description
WELLER WSA350 SOLDER FUME AND SMOKE ABSORBER, 120VAC10. VALTCAN Solder Smoke Extractor Fan Plenum System HEPA Active Carbon Filter ESD Safe for Fume Removal with Brushless Motor 3 Speed Fan Includes Hose Attachments
Feature
Remove Smoke, sodering fumes, flux smoke, odor from soldering stations, workstations, nails, paint etc quick,safe and efficientlyBrushless motor ensures high speed with low noise, stable performance, long life time, and low power consumption
Hose attachments included - a 100 dollar value! Operational in standing or sitting mode for more direct smoke absorption from your workbench.
3-Speed Modes. Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in workstations.
On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Hose Attachment kit Included a $120 dollar Value.
Description
New Valtcan Smoke Absorber with replaceable Activate carbon filters. 3 Filters are included to start. Low noise and high- efficient fan with 3 modes of operation - low, medium, high speed. Made of anti-static material.- -Lightweigt and compact design; save space and easy to move;
- - Strong engineering plastic case with good impact resistance nd anti-vibration funcion;
- - Brushless motor ensures high speed with low noise, stable performance, long life time, and low power consumption;
- -The adoption of glass fiber as the filter ensures the filtering efficiency as high as above 99.97%. It can filter over 80 kinds of viruses, bacteria, parasites, microbes, etc.
- - Its pre-filter cotton is 5-15 times better than the other ordinary pre-filter cotton, in terms of life span and the filtering volume. Besides, it can filter effectively the particles as large as over 10m.
- - Its activated carbon filter is 10 times more efficient than the other ordinary activated carbon filter. It can effectively purify the toxic and harmful gases in the air, such as formaldehyde, benaene, ammonia, radon gas, sulfur dioxide, etc.
- - When the filter gets saturated, the built-in buzzer will give sound andlight alarms in time, which reminds the operator to replace the filter immdeiately.
- - You can choose to add the fume extracting duct onto the air inlet or not to add it.
- Filtering Efficiency 0.3m 99.97%
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
- Power supply: AC110, 60Hz
- Power consumption: 35W
- Noise Level: < 50dB
- Dimensions: 12 x 12 x 12 in
- Weight:10 lb
Portable, single user fume extraction system.No external ducting or compressor needed. Innovative adaptor transforms the plenum into an arm Immediate extraction of fumes, particles and vapors
11. KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station
Feature
Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
Easy to replace filter, Includes one replacement filter. Working temperature: -2060, Power consumption: 120V, 30W (50 / 60Hz).
US based customer support, 30 days full satisfaction no question asked return period.
12. KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction
Feature
Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
Easy to replace the filter, Includes one replacement filter. Working temperature: -2060, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
13. 3-in-1 Solder Smoke Absorber Fume Extractor Fan with Carbon Filter LED Lamp 10 Brightness 3 Light Colors Adjustable Arms and Tabletop Clamp for ESD DIY Working Soldering Desoldering Rework Station
Feature
Lead smoke is toxic during soldering, even if it is lead-free solder, which contains a certain amount of lead, harmful to your health. Our 3in1 Soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan(with Carbon Filter LED Daylight)protect you away from poisonous smoke. Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area.Low Noise Fan with Smoke Filter: ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage.
Multifunctional Lamp: At the time of smoke absorbed fan working, its 3 Light Colors and 10 Brightness Levels can help you work in various light conditions. Natural light illumination, soft and without ghost, glare, protect eyes. USB power ports allow you to plug into any USB outlets, such as cellphone wall adapter/power bank/laptops or another USB outlet. It's easily changed the light color or adjust the brightness by the controller. Widely used on a desk, workbench, table, or bedside table by a metal clamp, does a secure position, will not occupy your extra tabletop space.
Adjustable Arms: The lamp head can be put 220 degrees up and down, and 360 degrees swivel. 8.7 inches and 8.7 inches extendable long arm and expanded up to 14 inches. And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking, NOTE: To guarantee the best smoke absorbing, please make the fan and solder joint within 6 inches(15cm).
Costumers Service: We have products 100 percent quality inspection, and all customers have 3 months of exchange or return policy and promise to provide a 3 years aftersales service. If for any reason you are not satisfied with your purchase, please contact us.
14. Aoyue 486+ Fume Extractor and Smoke Absorber Fan with Exhaust hose and light
Feature
Activated Carbon helps filter harmful fumes and smokeFor poor ventilated room's or work environment, connects to a 4" aluminum air duct to direct fumes out of the room
Integrated low voltage lamp with a separate switch for better work area lighting
15. Valtcan Solder Smoke Absorber Fume Extractor Fan
Feature
Remove Smoke, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, paint etc quick,safe and efficiently496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.
Adjustable tilt for more direct smoke absorption from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.
Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters.
16. Solder Smoke Absorber Lamps, Flexible ESD-Safe Fume Extractor Remover Fan with 3 Colors Light, Fume Prevention Absorber DIY Working Fan for Soldering
Feature
High-efficient AbsorbThe powerful remove fume extractor absorber fan, Strong absorption, effectively absorb the toxic fumes, air purification.3 LED-Lluminable3 colors of light.It can be illuminated while smoking awayso meet various working environments.
ESD safe: Anti-static smoke Extractor, Low noise fan, great for electronics, arts and crafts, soldering station work.
Easy to use: Unique disassemble designed,and easy to replace filter. The filter consists of foam and activated carbon, Which is ideal for absorbing toxins to protect healthy.
2 fixed ways: Adjustable absorbing angle, flexible construction -- The durable metal clip can be fixed to any flat surface that is less than 2.56 ''/ 6.5 cm (max) thick.
17. Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber
Feature
High qualityLow Noise Fan with Smoke Filter: ESD safe smoke Extractor fan with 0.4 inch thick activated carbon filter can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 2 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage.Prevent From Poisonous SmokeLead smoke is toxic during soldering, even if it is lead-free solder, which contains a certain amount of lead, harmful to your health. Our WEIJIANG Soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan can protect you away from poisonous smoke.
Upgraded DesignOptimized 3300 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
Working temperature -2060, Power consumption: 120V, 30W (50 / 60Hz). Optimized 3300 revolutions per minute Fan provide excellent smoke suction. WEIJIANG Ball bearing pure copper motor support 50000 hours lifetime.
Worry-Free WarrantyWEIJIANG smoke Extractor fan offer a replacement or full refund within 12 months. Please believe in quality and our service and feel free to contact us anytime and our dedicated customer support team would be happy to assist your issue.
18. Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter
Feature
Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter piece is convenient and quick.
Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours.
Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.
It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work.
Recent Comments