Best extractor fan for smoke to buy in 2022
We spent many hours on research to finding extractor fan for smoke, reading product features, product specifications for this guide. For those of you who wish to the best extractor fan for smoke, you should not miss this article. extractor fan for smoke coming in a variety of types but also different price range. The following is the top 10 extractor fan for smoke by our suggestions:
Best extractor fan for smoke
1. Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan
Feature
The Powerful Remove Fume Extrator and handy carrySturdy Aluminium alloy material
Long-lasting working time for over 50,000 hours
Easy to replace filter
Great for electronics, arts and crafts, and stained glass work
Description
Kulannder DIY working Fan believed in handy carry and sturdy Solder Smoke Absorber, also can use a cooler fan on working table. It's easy to DIY operating by yourself, just soldering, drivepipe and lock the screw, then finish a best and useful DIY Remover Fume Extrator or a cooler working fan.
NOTES:
1, The best working position: the distance between Solder point and Fans no more than 20cm.
2, Don't constant working over 24hours.
Features:
1, Power consumption: 30W
2, Maximum air flow: 2000ml/min
3, Working temperature: -30 to 70 degree
4, Lifetime: 50,000 hours
5, Certification: ULCULCCCCE TUVtuvEMCROHS
6, Weight: 1.3lb
7, Size: 8.8'*6'*2.4'
2. Aoyue AO486 486 Benchtop Solder Smoke Absorber
Feature
Great for electronics, arts and crafts, and stained glass workQuiet yet powerful operation
Activated carbon filter
ESD-safe
Description
It's time to breathe easy! This bench top fume extractor removes soldering smoke and fumes quickly, safely and efficiently. Great for electronics, arts and crafts, and stained glass work.Quiet yet powerful operation. Approx 37 cubic feet per minute airflow Activated carbon filter absorbs up to 80 percent of the odors from the air and is easy to replace ESD-safe by design Approx. 5"x5" filter area Unit measures Approx. 11"h x 8"w x 6"d One Extra replacement filter included.
3. Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health
Feature
The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.Sturdy Aluminium alloy material and long-lasting working time.
Super easy to set up and easy to replace filter.
Portable and low noise, quiet and high-efficient fan.
ESD safe, great for electronics, arts and crafts, soldering station work.
Description
Kulannder adjustable solder smoke absorber is ideal for absorbing toxics, the filter consists of foam and activated carbon.
Features:
-Power consumption: 30W
-Maximum air flow: 2000ml/min
-Working temperature: -30 to 70 degree
-Lifetime: 50,000 hours
-Certification: ULCULCCCCE TUVtuvEMCROHS
-Weight: about 2.65lb
4. YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Specifications:- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package includes:
- 1x soldering absorber
- 1x back cover (for connecting pipe)
- 1x manual
5. Zinnor Solder Smoke Absorber Bench Top Solder Smoke Absorber Exhaust Fan, Activated Carbon Filtration, Silent, 16W (Shipping US)
Feature
[Low Noise]: The solder smoke absorber adopts a quiet and soft design with low noise to create a quiet and comfortable environment for you.[Adjustable Angle]: The angle of the fan can be adjusted, and the omni-directional powerful smoke can be collected.
[High-efficiency Filtration]: The solder smoke absorber has an activated carbon filter that can effectively absorb toxic gases and provide a safe working condition.
[Can be connected to the exhaust pipe]: You can install the rear cover, connect the exhaust pipe to use, you let you more choices.
[Transportation]: This solder smoke absorber is delivered directly from the US warehouse. The transportation speed is fast and can be delivered within 3-5 days. If you have any questions about the product, you can contact us at any time.
Description
When soldering components, the tip of the soldering iron comes into contact with rosin and generates a lot of white smoke gas.These poisonous gases are not only pungent, blinking, but more importantly threaten the health of maintenance personnel.
Prolonged inhalation of these toxic gases can cause headaches, dizziness, vomiting, and eye diseases.
This type of soldering smoker is exquisite and compact, with strong wind power, and it is suitable for small maintenance workbenches.
When used, this fan only needs to be protected from the front of the iron tip. Toxic smoke will be quickly removed and it can also be used to cool down.
🌵Feature:
1. The filter consists of foam and activated carbon and is very suitable for the absorption of toxins.
2. Adjustable absorption angle.
3. Low noise, high efficiency fan.
4. Use antistatic materials.
5. Activated carbon filter can be replaced.
🌵Specification:
Main:
Power supply: AC110, 60Hz
Power consumption: 16W
Inlet concentration: 2(mg/L)
Dimensions: 8.7 x 10.6 x 6.6 in
Activated -- Carbon filer:
Size: 5.1 x 5.1 x 0.4 inch
Amount of activated carbon filter: 7g
Max. Absorbing weight of components per one filter: 2g
🌵Package includes:
1*soldering absorber
1*manual
🌵Note :
Dear friend, if you have any question about the product, please contact us before leaving the feedback, we will deal with the issue immediately and carefully until you are satisfied.
6. 1000l Adjustable Solder Smoke Absorber Remover Fume Extractor Carbon Filter Quiet Fan for ESD Soldering Station
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Features:- The filter consists of foam and activated carbon, Which is ideal for absorbing toxins.
- Adjustable absorbing angle.
- Low noise and high- efficient fan.
- Made of antistatic material.
- Easy to replace filter.
Specification:
- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package contents:
- 1x soldering absorber
- 1x manual
7. Solder Smoke Absorber Remover Fume Extractor Air Filter Fan ESD Soldering 1000L
Feature
Power supply: AC120, 60Hz , Power consumption: 30WMaximum air flow: 1000L/min , Inlet concentration: 2(mg/L)
Dimensions: 8.7 x 10.6 x 6.6 in , Weight: 2.33lb
Activated -- Carbon filer: , Size: 5.1 x 5.1 x 0.4 inch , Amount of activated carbon filter: 0.02lb
Max. Absorbing weight of components per one filter: 0.004lb
Description
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Package contents: 1x soldering absorber , 1x manual
8. 6 Pack Solder Extractor Filter Carbon Filter Replacement Activated, Smoke Fume Absorber Filter for Hakko/Xytronic/Aoyue Smoke Absorber 5 1/8 5 1/8 3/8
Feature
Kulannder extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.How often should replace your carbon filter? Normally activated charcoal filters should last 4-5 months should replace a new filter.
This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.etc.
Enough quantity and size: totally 6pcs carbon extractor filter, each carbon filter dimensions are 130mm*130mm*10mm(5 1/8" * 5 1/8" * 3/8")
Extractor filter only, not include smoke absorber!
Guarantee and Warranty: any quality issues, just contact us for refund or replacement.
Description
Product Description:Kulannder 6 Pack extractor carbon filter replacement activated carbon filter for Hakko corporation 493, FA-400, Xytronic 426DLX and 456DLX, and Aoyue 486 bench top smoke absorber.
Size:
each carbon filter dimensions are 130mm*130mm*10mm(5 1/8" * 5 1/8" * 3/8")
Weight:
totally about 3oz
Quantity include:
6pcs carbon filter
9. Weller WSA350 120v Bench Top Smoke Absorber
Feature
Great for workspaces using more active fluxesRemoves flux fumes from soldering workbench
Fumes are absorbed by the replaceable carbon-activated filter
Includes one replacement filter (WSA350F), ESD safe
Fan is quiet and will not add significant noise to the workspace
Description
WELLER WSA350 SOLDER FUME AND SMOKE ABSORBER, 120VAC10. VALTCAN Solder Smoke Extractor Fan Plenum System HEPA Active Carbon Filter ESD Safe for Fume Removal with Brushless Motor 3 Speed Fan Includes Hose Attachments
Feature
Remove Smoke, sodering fumes, flux smoke, odor from soldering stations, workstations, nails, paint etc quick,safe and efficientlyBrushless motor ensures high speed with low noise, stable performance, long life time, and low power consumption
Hose attachments included - a 100 dollar value! Operational in standing or sitting mode for more direct smoke absorption from your workbench.
3-Speed Modes. Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in workstations.
On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Hose Attachment kit Included a $120 dollar Value.
Description
New Valtcan Smoke Absorber with replaceable Activate carbon filters. 3 Filters are included to start. Low noise and high- efficient fan with 3 modes of operation - low, medium, high speed. Made of anti-static material.- -Lightweigt and compact design; save space and easy to move;
- - Strong engineering plastic case with good impact resistance nd anti-vibration funcion;
- - Brushless motor ensures high speed with low noise, stable performance, long life time, and low power consumption;
- -The adoption of glass fiber as the filter ensures the filtering efficiency as high as above 99.97%. It can filter over 80 kinds of viruses, bacteria, parasites, microbes, etc.
- - Its pre-filter cotton is 5-15 times better than the other ordinary pre-filter cotton, in terms of life span and the filtering volume. Besides, it can filter effectively the particles as large as over 10m.
- - Its activated carbon filter is 10 times more efficient than the other ordinary activated carbon filter. It can effectively purify the toxic and harmful gases in the air, such as formaldehyde, benaene, ammonia, radon gas, sulfur dioxide, etc.
- - When the filter gets saturated, the built-in buzzer will give sound andlight alarms in time, which reminds the operator to replace the filter immdeiately.
- - You can choose to add the fume extracting duct onto the air inlet or not to add it.
- Filtering Efficiency 0.3m 99.97%
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
- Power supply: AC110, 60Hz
- Power consumption: 35W
- Noise Level: < 50dB
- Dimensions: 12 x 12 x 12 in
- Weight:10 lb
Portable, single user fume extraction system.No external ducting or compressor needed. Innovative adaptor transforms the plenum into an arm Immediate extraction of fumes, particles and vapors
Recent Comments