Best embossing powder heat gun for 2022
If you looking for embossing powder heat gun then you are right place. We are searching for the best embossing powder heat gun on the market and analyze these products to provide you the best choice.
Best embossing powder heat gun
1. Wagner Spraytech Wagner 0503038 HT400 Heat Gun 650F, Basic Pack
Feature
Complete projects such as shrink tubing spliced wires and other electrical repairCompact pencil-like design best for delicate projects and precise control
Use it to apply embossing powders, applique, and shrink wrap
Retractable stand prevents the hot nozzle from touching the work surface
Temperature: 650F (343C)
Description
The HT400 Precision Heat Tool is a versatile tool for home,shop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate projects related to crafting and electronics. Its simple design has one temperature setting of 650F and an integrated stand for hands-free work.2. Mini Hot Air Gun, ZeopoCase Portable Mini Heat Gun for DIY Embossing Shrink Wrapping Drying Paint, 300W Multi Function Electrical Heat Tool
Feature
Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completedMade of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
The temprature can not be adjusted, but it can reach at about 200C/390F within a few seconds abstractly which heat up quickly and works like a charm
WHAT YOU GET - 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.
Description
This excellent compact electrical heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gunFEATURE:
Size: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchs
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
Product Warranty
[QUALITY ASSURANCE] ZeopoCase offer 12 month warranty time for the product.
If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.
3. Mini Heat Gun, CooBox 300W Electric Mini Hot Air Gun for Heat Shrink Tubing Drying Paint DIY Embossing Shrink Wrapping
Feature
Heats up quickly, the temprature can't be adjusted, but it can reach at about 200C/390F within a few seconds, but it can reach at about 200C/390F within a few seconds.This excellent compact heat gun can be used for rubber stamp, embossed powder, heating shrinkable film, heat shrink tubings and drying paint, etc.
Made of high-quality ABS plastic outside and stainless steel inside, portable, simple and durable.
Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
Packing include:1 x Hot Air Gun, 1 x Detailed Instructions, 1 x Additional replaceable protecting cap, 12 mounth warranty.
Description
This excellent compact heat gun can be used for rubber stamp, embossed powder, heating shrinkable film, heat shrink tubings and drying paint, etc.Specifications:
Color: White
Material: ABS
Size: 228*44mm / 9*1.7in, wire length: 90cm
Type: Constant temperature
Working temperature: 200C/390F
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power: 50-60Hz
What You Get:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
12 mounth warranty.
4. Bestgle Hot Air Gun, Mini Heat Gun Shrink Wrap for Embossing, Multi-Purpose Hand Hold Embossing Heat Tools for Crafts 300W
Feature
Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200C / 390F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Description
With Bestgle Hot Air Gun100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun
FEATURE:
Color: Black
Material: ABS
Size: 240*50mm / 9.44*1.97in, wire length 140cm
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Working time: 8 minutes
Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45 for heating until the completion of the work
4.Turn off the power to stay cool
Notes:
1.This kind of gun can not adjust the temperature but it heats up quickly at about 200 theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
5. QST 300w Hot Air Gun Hand Hold Mini Heat Gun for Embossing Heat Tool 110V US Plug (White)
Feature
Specifications: Material Plastic Color: White Length: 23cm Working temp.: 200 Rated Power: 300W Rated voltage: 110V 50-60HZ Weight: 230g +/-20g Type: Constant temp. hot air gun Plug Type: US Plug1.Do not touch the nozzle when the hot air gun is in use or just after use. The handle of the hot air gun must be kept dry, clean and away from oil or gas.
2.Do not direct the hot air against people or animals. After use, the nozzle or scraper to remove the dry paint to avoid fire.
3.The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
4.Please pay attention to using the best clearance distance is 5 cm, heating temperature of 200 .
Description
QST 300w Hot Air Gun Hand Hold Mini Heat Gun for Embossing Heat Tool 110V US PlugSpecifications:
Material Plastic
Color: White
Length: 23cm
Working temp.: 200
Rated Power: 300W
Rated voltage: 110V 50-60HZ
Weight: 230g +/-20g
Type: Constant temp. hot air gun
Plug Type: US Plug
Package Included
1 x Hot Air Gun
NOTE:Rated Voltage:110V
Size:230mm*50mm Rubber Chapter Convex Powder Embossing Powder heat-shrink sheets
The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The hot air gun can not control,the muzzle can reach 200 degrees in a few seconds.
When used for Soft ceramics, don't stay long time blowing one place
The tool can be used for heating shrinkable film, embossed powder,rubber stamp,best choice to replace toaster or oven,small clay works can be directly used hot air gun to blow hard
NOTE:Rated Voltage:110V
Size:230mm*50mm Rubber Chapter Convex Powder Embossing Powder heat-shrink sheets
The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The hot air gun can not control,the muzzle can reach 200 degrees in a few seconds. When used for Soft ceramics, don't stay long time blowing one place
The tool can be used for heating shrinkable film, embossed powder,rubber stamp,best choice to replace toaster or oven,small clay works can be directly used hot air gun to blow hard
6. Embossing Starter Kit: Heat Tool Machine, Emboss It Pens, Ranger Gold and Silver Powder
Feature
Multi Purpose Embosser Heat Tool: Emboss and shrink-wrap to your heart's content with this handy heat gun.Ranger Inkssentials Embossing Pens, 2-Pack: Pens contain a specially formulated ink that stays wet on paper, providing the tack needed to attract and retain embossing powders until they are cured with heat.
Ranger Embossing Powder, 1 Ounce Jar, Super Fine Silver.
Ranger Embossing Powder, 1 Ounce Jar, Super Fine Gold.
Embossing is a technique that allows you to add raised elements to paper craft projects. Embossed elements are created by stamping or drawing images onto card stock or paper with heat-embossing-friendly ink, then covering the inked area with special powder that melts when heat is applied with a heat gun or heat tool.
7. Hot Air Gun, Handheld Electric Mini Heat Gun Kit Hot Air Shrink Gun DIY Electric Nozzle 300W 110V US Plug
Feature
EASY TO USE - Mini Hot Air Gun Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completedRELIABLE MATERIAL - The Hot Air Gun made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable. Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
POWERFUL - Hot Air Gun temprature can not be adjusted, but it can reach at about 200C/390F within a few seconds abstractly which heat up quickly and works like a charm
NOTE - In order to better use the Hot Air Gun, Do not work continuously over 10 minutes, blow at 45 degree angle to avoid heat suck.
GUARANTEE - This hot air gun is the best helper in your life. If you are not satisfied with our products, please contact us, we will give you the best service.
Description
Color:PinkFeatures:
100% Brand New and High Quality Can be used to heating relief powder and shrinkable sheet Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few minutes, it not only can add its hardness, but also its brightness
The temprature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck. Be carefull when using the hot air gun
Specifications :
Material Plastic
Color: Pink
Length: 24cm
Working temp.: 200
Rated Power: 300W
Rated voltage: 110V 50-60HZ
Weight: 310g
Type: Constant temp. hot air gun
Plug Type: US Plug
Package Included
1 x Hot Air Gun
8. Hand Hold Mini Heat Gun Hot Air Gun Embossing Multi-Purpose Heat Tool with Dotting ToolPink
Feature
General purpose heat gun for crafts ,Embossing Tools for DIY and stripping paint .At heat gun tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
Embossing dryer, DIY equipment for heating Shrinking film, mud toys and other items. good tool for ceramic creations.
Two pin US plug and 1m / 3ft cable .
Built-in stand for self-support and table top use
Description
Product Features:- Mini 300 watt heat gun for embossing powder. Fast and easy to use for multi-function DIY works.
- Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.
- Built-in stand for self-support and table top use.
Specification:
- Material: ABS Plastic
- Length: approx. 24cm
- Power Cable: approx. 1m
- Working temp.: 200
- Power: 300W
- Voltage: 110V 50-60HZ
- Weight: approx. 310g
- Plug Type: US Plug
Package Includes:
- Heat Gun x1
- Manual (English) x1
Instructions:
- Power on the embossing tools.
- Hold the product as shown on the picture.do not touch the hot nozzle.
- Keep 5-6cm distance between the heat tool and item.
- Suggest do not continuously use more than 10 minutes to prevent overheated.
9. Mini Heat Gun, Your Supermart Hot Air Gun Shrink Gun Tools with Stand For Drying Paint Multi-Purpose Electric Heating Nozzle and DIY Embossing 300W Power 110V (Black)
Feature
Heat gun is made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.Heat gun for shrink wrap: Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200 / 390 within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working conti
Heat shrink gun is so easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 angle until completed. With the 45 it can avoid heat suck.Do not direct the hot air against people or animals.Do not touch the nozzle when the hot air gun is in use or just after use. The handle of the hot air gun must be kept dry, clean and away from oil or gas.
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,relief powder and shrinkable sheet,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the embossing gun.
Description
Note:1.Do not use hot air guns with chemical type (plastic) scraper.
2.After use, the nozzle or scraper to remove the dry paint to avoid fire.
3.do not use the hot air gun hair as a hair dryer.
4. Do not direct the hot air against people or animals.
5. Do not touch the nozzle when the hot air gun is in use or just after use. The handle of the hot air gun must be kept dry, clean and away from oil or gas.
6. Hot air gun to be completely cooled before storage.
Specifications:
Material Plastic
Color: Black
Length: 24cm
Working temp.: 200
Rated Power: 300W
Rated voltage: 110V 50-60HZ
Weight: 310g
Type: Constant temp. hot air gun
Plug Type: US Plug
Package Included
1 x Hot Air Gun 1*Detailed Instructions
10. American Crafts Zap Embossing Heat Gun
Feature
Effective for Applying Directional Heat to any craft project.Simply Apply Embossing Ink to Paper using a Stamp or Marker, sprinkle with embossing power, gently remove excess powder, apply heat!
Built in Stand for Easy Table Top Use and Storage
Recent Comments