10 best blinds wand tilter for 2022
It’s not that easy to choose the right blinds wand tilter since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top blinds wand tilter on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best blinds wand tilter on the marketbut dont skip to the end!
Best blinds wand tilter
1. Heavy Duty Low Profile Wand Tilter for 2" Horizontal Blinds, Hexagon Shaped Gear/Hook Connection (2 Qty)
Feature
Order a quantity of 1 in your shopping cart and receive 2 wand tilters.These wand tilters fit inside a headrail that is only 2.25" wide and 1.5" tall
Has a hexagon shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail must be hexagon shaped in order to fit inside of the gear.)
The hexagon shaped gear hole in the center is 1/4" wide in diameter.
See "How to Replace Wand Tilt Mechanism" in the Product Description below.
Description
Order a quantity of 1 in your shopping cart and receive 2 wand tilters. PLEASE MEASURE BLIND HEADRAIL BEFORE ORDERING - These wand tilters fit inside a headrail that is only 2.25" wide and 1.5" tall. Has a hexagon shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail MUST BE hexagon shaped in order to fit inside of the gear.) The hexagon shaped gear hole in the center is 1/4" wide in diameter. How to Replace a Wand Tilt Mechanism: 1) Things you'll need: Steel tape measure and pliers 2) Remove the blind from the window and lay it on a flat surface. 3) If the wand is still attached, remove it and set it aside. 4) Measure the height and width of the metal headrail of your blind. If your headrail is 2.25" and 1.5" tall, then this product might be what you need. 5) With the pliers, remove any end stiffeners that are pressed into both sides of the end of the headrail. 6) Slide the metal rod out of the gear from the old wand tilt mechanism. If the metal rod is shaped like a hexagon (6 sides and 6 corners) then this is the wand tilt mechanism that you will need for your blind. 7) Slightly spread the headrail to remove the tilter from the headrail. 8) Install the new tilter by seating the tilter and then sliding the metal rod through the center gear hole. 9) Put end stiffeners back on, attach wand, and then hang up blind. You're finished!2. (Qty 1) High Profile Wand Tilter with Zinc Stem
Feature
High ProfileThis fits 2" x 2 1/4" headrail
For Square Rod
3. Cutelec 2pcs 2" Low Profile Wand Tilter Mechanism with Hexagon Shaped Gear Hook Connection for Low Rail Horizontal Wood and Faux Wood Blinds headrail
Feature
Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and shape of our tilters. If it has difference,please don't palce the order in order to save money for you. Because it will not match.Wand Tilter 2pack for 2" Blinds Hexagon Shaped Gear Hook Connection
Has a hexagon shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail must be hexagon shaped in order to fit inside of the gear.)
The hexagon shaped gear hole in the center is 1/4inch wide in diameter.
Please kindly check the size in the picture and make sure it can match your device before order.
4. Low Profile Wand Tilter for 2" Horizontal Blinds, Hex Gear (2)
Feature
Low Profile Wand Tilter for 2" Horizontal BlindsThis is the correct tilter if: 1) YOUR HEAD RAIL IS 2 1/4" WIDE AND 1 1/2" TALL
5. 2 Pack Wand Tilt Control Horizontal Blind Parts Wand Tilter Large, High Profile
Feature
2 Pack Wand Tilt Control Horizontal Blind Parts Wand Tilter Large, High ProfileHeadrail must measure 2 1/4" tall ONLY
6. Heavy Duty High Profile Wand Tilter for 2" Blinds, Square 1/4" drive w/Hook Connection (2 QTY), by Amazing Drapery Hardware
7. Thasaba Heavy Duty Low Profile Universal Wand Tilter for 2" Horizontal Blinds, Hex Gear/Hook Connection (2 Qty)
Feature
QUANTITY: This 2 Pack contains 2 individual wand tilters.COMPATIBILITY: Can only fit inside a headrail that is 2 1/2" wide x 1 1/2" high. Only works with a metal rod that is 1/4" in diameter that is hexagon shaped.
LONG-LASTING: Heavy duty metal gear and stem instead of plastic.
HOW TO REPLACE: See "How to Replace Wand Tilt Mechanism" in the Product Description section.
8. 2 Qty: Low Profile Wand Tilt Control for Horizontal Blinds, by Amazing Drapery Hardware
Feature
Brand new high quality wand tiltersHexagon zinc gear for 6 sided tilt rod. 1/4" hex.
Fits 2.25" x 1.5" headrail
2 Pack
9. Wand Tilt Control for Horizontal Blinds, 2 Pieces
Feature
This is the correct tilter if: 1) YOUR HEAD RAIL IS 2 1/4" WIDE AND 1 1/2" TALL10. cuteLEC Wand Tilter for 2" High Profile Window Blinds, Tilt Mechanism Hook Connection with Square Zinc Gear for High Rail Blinds
Feature
Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and shape of our tilters. If it has difference,please don't palce the order in order to save money for you. Because it will not match.The wand tilter has a Square shaped gear hole in the center(Means the metal rod located inside of your blind's headrail must be Square shaped in order to fit inside of the gear)
Package of 1pc Wand Tilter for 2" High Profile Window Blinds.
The Square shaped gear hole in the center is 1/4 inch wide in diameter.
Please kindly check the size in the picture and make sure it can match your device before order. Report incorrect pro
Recent Comments