Top amplified subwoofer for truck for 2022
If you looking for amplified subwoofer for truck then you are right place. We are searching for the best amplified subwoofer for truck on the market and analyze these products to provide you the best choice.
Best amplified subwoofer for truck
1. Polk Audio PSW10 10" Powered Subwoofer - Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black
Feature
Single 10-inch subwoofer in black with built-in high-current amplifier for big bassEquipped with one 10-inch polymer-composite dynamic-balance cone driver. Line- and speaker-level inputs and speaker level outputs allow easy connection to any system
Laser-based Klippel measurement technology for improved linearity and deep, precise sound. Low-Pass Crossover Frequency : 80-160 Hz
Non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing. Amplifier Continuous Power - 50 watts.Amplifier Dynamic Power - 100 watts
Measures 14 by 14.38 by 16.12 inches (WxHxD)
Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels. You should limit prolonged exposure to volumes that exceed 85 decibels(dB)
Description
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industrys most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.2. Rockville RW10CA 10" 800 Watt Under-Seat Slim Amplified Car Subwoofer +Wire Kit
Feature
Package: Rockville RW10CA 10" 800 Watt Peak/200 Watt RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote + Rockville RWK10 Complete 10 Gauge Wire Kit With Rca CablesRockville RW10CA 800 Watt 10" Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit.
Phase Switch: 0 or 180. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz. Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m
Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire.
3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
Description
The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. We added high level inputs so you don't need a remote wire from your receiver to trigger the unit on and off. The smart circuit will sense that an audio signal is present and turn on your radio and a signal is present. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Using the high level input is also the fastest and easiest way to install an aftermarket amp subwoofer combination since you do not have to remove the receiver. You simply use the high level input and wire it to one of your speakers. Another thing we did to make installation a breeze is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitors models are more challenging to install.
The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant. Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder.
This has amazing controls so you can tweak the sound to your liking. It has a level control for the volume, a subsonic filter to filter out the really low frequencies that the human ear can not hear. This also has a low pass crossover filter, phase control, and bass boost.
Included is a remote bass knob, and mounting hardware.
3. Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub
Feature
Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
Thermal Protection Circuit, Short Protection Circuit.
Overload Protection Circuit. Phase Switch: 0 or 180.
Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.
Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.
Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.
Note: Kindly refer User Manual before use
4. MTX RT8PT 8" 240 Watt Amplified Loaded Subwoofer Tube Audio Set w 8 Ga. Amp Wiring Kit
Feature
MTX 8" Amplified, Loaded Subwoofer Tube240 Watts max. power, 120 Watts RMS. 8 Gauge Amp Wiring Kit is included (kit ships from separate location and may arrive on a different day)
Vented, Carpted Enclosure H 9.84" x W 9.84" x L 21.25"
High Level and RCA Inputs enable setup with any system
External Bass Control is included for convenient control of volume from front of vehicle.
5. Rockville Rws12ca Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure
Feature
Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure.1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer.
Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.
Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.
Dimensions: 24" Length x 15" Height 4.37" Top depth x 6.65" Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.
150Mv - 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs.
High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote.
6. Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Active Car Truck Subwoofer Bundle with Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
Feature
(1)Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Active Car Truck Subwoofer Sub. (1) RockvilIe RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA. Features: Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Car Sub. Power Rating: 120 Watts RMS. Max Power Output: 240 WattsPowered subwoofer with cast metal enclosure. 8" woofer high-excursion cone. Built-in Class D amplifier. Frequency response: 32-150 Hz. Variable low-pass crossover (80-200 Hz). Variable phase control (0-180 degrees). Preamp- and speaker-level inputs. Dimensions: 13-1/2"W x 9"H x 3"D. Features:
RockvilIe RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire
Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility
PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
7. Hifonics Brutus BW-110A - 800 Watts Compact Amplified Under The Seat Car Truck Subwoofer Low Profile with Bass Remote, Great for Vehicles That Need Bass But Have Limited Space, Black
Feature
Power Handling: Peak: 800 watts RMS: 150 wattsPWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
Delayed Soft Remote Turn On Adjustable Input Sensitivity
Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz
Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
8. Planet Audio P10AW Amplified Car Subwoofer - 1000 Watts, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
Feature
Built-in Amplifier - A built-in 1000 Max watt amplifier powers the subwooferMosfet Power Supply - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the P10AW to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the P10AW with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Specs - Dimensions: 13.58 x 10.43 x 3.15, Weight: 10.53 lbs., Phase control, LED status indicator, Thermal, Short and Overload Protection Circuits, High Performance Voice Coil, Rubber Surround, Aluminum Cone
Warranty - Planet Audio provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
9. Rockford Fosgate P300-10T Punch 10" 300 Watt Powered Truck Sealed Box Subwoofer
Feature
The Punch P300-10T is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket systemThe 10" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 13.3" x 21.7" x 7.9" x 4.8"
Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass boost EQ, and built-in 0/180 phase switch
The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
10. Rockford Fosgate P300-12T Punch 12" 300 Watt Powered Truck Sealed Box Subwoofer
Feature
The Punch P300-12T is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket systemThe 12" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 15" x 25.8" x 4.8" x 8.5"
Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch
The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
Recent Comments