9 best heatsink glue
Finding your suitable heatsink glue is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best heatsink glue including detail information and customer reviews. Let’s find out which is your favorite one.
Best heatsink glue
1. 75g + 10g Thermal Conductive Silicone Plaster Viscous Adhesive Compound Cooling Glue For LED GPU Chipset Heatsink
Feature
50ml /PCS , approx. 75gDescription
100% New Heatsink plasterApplication: apply to all heatsinks no fixed clip thermal paste. Idea for MOSFET HeatsinksVGA CARD Northbridge Southbridge Heatsink.
Special properties: High Conductivity; low bleed; stable at high temperatures.
Features: thermal properties, strong adhesion
Thermal Resistance: <0.246 -in /W
Type: silicone fluid.
Physical From: Grease-like
Evaporation: 0.001% (200 / 24Hours)
Thermal conductivity:> 0.671W/m-K
Dielectric Breakdown: >6.0 KV ac
Maximum Use Temperature: -20~250.
Strength of connected buildings: 25Kg
Insulation coefficient> 5.1 * Dissipation coefficient <0.005
50ml /PCS , approx. 75g
2. Arctic Alumina Thermal Adhesive 5g
Feature
Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capaciti
A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams
Description
Arctic Alumina Ceramic Thermal Adhesive Epoxy w/ Application Wand - 5g NEW
3. Arctic Silver Arctic Alumina 5g Premium Ceramic Thermal Cooling Adhesive Set (AATA-5G)
Feature
Layered composite of aluminum oxide and boron nitridePure electrical insulator, neither electrically conductive nor capacitive
-40 to 150 Celsius temperature range
5g Set (2.5g x 2)
Description
The Arctic Silver Alumina Premium Ceramic Thermal Adhesive is a layered composite of aluminum oxide and boron nitride and is a pure electrical insulator.4. ARCTIC MX-4 - Thermal Compound Paste, Carbon Based High Performance, Heatsink Paste, Thermal Compound CPU for All Coolers, Thermal Interface Material - 4 Grams
Feature
BETTER THAN LIQUID METAL: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.THERMAL COMPOUND: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
HIGH DURABILITY: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
EASY TO APPLY: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
Description
About ARCTICARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support. About ARCTIC
ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support.
5. Aikenuo 25m x 20mm x 0.15mm Thermal Adhesive Tape,High performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity: 1.5 W / m-k
Breakdown Voltage: 5KVAC
Thermal resistance: 0.3 C in2 / w
Initial Adhesion: 1.5kg / inch
180 Adhesion power:> 18 N / 25mm
Applicable temperature range: -30 ~ + 150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30 ~ + 150 C) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductor double-sided tape, keep the adhesive surface clean and dry
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape has initial viscosity and aging viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4. of the paste process, the appropriate heating (60 ~ 70 C), the post to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
6. GENNEL Series 10g Thermal Conductive Plaster Viscous Adhesive Glue for PC Heatsink GPU IC Chip LED Ovens
Feature
GENNEL--GN910NET: 10g
Description
* 100% New Heatsink plaster.* Application: apply to all heatsinkf no fixed clip thermal paste. Idea for MOSFET HeatsinkVGA CARD Northbridge Southbridge Heatsink.
* Features: thermal properties, strong adhesion
* Melting capacity: 0 (200 / 24Hours)
* Evaporation: 0.001% (200 / 24Hours)
* Thermal conductivity:> 1.2W/m-K
* Thermal Impedance: <0.06
* Clotting time: 3min (25 )
* Strength of connected buildings: 25Kg
* Insulation coefficient> 5.1
* Dissipation coefficient <0.005
* Temperature resistance: 200
* Net Weight: 10g
Package Includes:
1 x Thermal Heatsink Plaster Glue.
7. Sywon Professional Thermal Adhesive Conductive Tape Double Sided Cooling Tape for IC Chipset Heatsink LED,10mm x 25m
Feature
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.
Satisfy thermal conducting needs of high-end electronic products; Improve the lifespan of electronic components
Make applying a heatsink compound as simple as possible
Material: fiberglass substrate, adhesive layer, backing paper; High thermal conductivity and electrical insulator
Description
Sywon Thermal Adhesive Conductive Tape can satisfy thermal conducting or cooling needs of high-end electronic products, and help improve the lifespan of electronic components. It's professional thermal adhesive tape for attaching heat sinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.Specifications:
Material: fiberglass substrate, adhesive layer and backing paper
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)
Net Weight: 95g
Short term heat resistance: 356 (180C)
Thermal Conductivity: 1.3w/m-K
Initial Adhesion: 1.3kg/inch
180 Stripping Power: >16 N/25mm
Breakdown Voltage: 4kv
Applicable temperature range: -20C ~ +120C
NOTE:
1.Peel off the blue backing before using it, thus the heat transfer tape is white and double-sided adhesive.
2.When using this thermal conductive double-sided tape, keep the adhesive surface clean and dry.
3.The adhesion of the heat-conductive adhesive tape has initial value and persistent value. At room temperature it takes 72 hours to achieve the maximum adhesive strength. That is, the initial viscosity is around 40% of its maximum viscosity, and persistent stickiness will become stable over time.
Package Includes:
1 x Thermal Conductive Double-Sided Adhesive Tape (10mm x 25m)
8. MEC 8mm Double Sided Adhesive Thermal Conductive Silicone Tape For Heatsink GPU LED Cooling
Description
* 100% New.* Used for attaching heatsinks to CPU GPU,high power LED,Video Card RAM, DDR Memory Modules and other power Semiconductors.
* Ultra-thin film with excellent insulation , Low cost solution for many application
* Color: White
* Temp:
Long term heat resistance: 120 degrees Celsius
Short term heat resistance: 180 degrees Celsius
* Thermal Conductivity:1.3w/m-K
* Adhesive power: 1.3kg/inch
* Breakdown Voltage:4kv
* Thickness: 0.25mm
* Width: 5mm, 8mm, 10mm, 15mm, 20mm
* Length : 20M
9. D-worthy Professional Double Side Thermal Adhesive Conductive Tape for IC LED GPU Chipset Heatsink (20mm x 25m)
Feature
Package includes: 1 rollDimension: 20mm x 25m x 0.2mm (Width x Length x Thickness)
Used for attaching heatsinks to CPU GPU, high power LED, chipset, etc.
Improve the lifespan of electronic components
Double Side Adhesive Thermal Conductive Tape for hesatsink led
Description
Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED. etc. Improve the lifespan of electronic components
Product Specification:
Dimension: 20mm x 25m x 0.2mm (Width x Length x Thickness)
Glass fiber thickness: 0.2mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+220 C
Recent Comments