10 best quad frame 6mm for 2022
Finding your suitable quad frame 6mm is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best quad frame 6mm including detail information and customer reviews. Let’s find out which is your favorite one.
Best quad frame 6mm
1. BETAFPV Beta65S 65mm Whoop Frame Kit 3.6g V4 Version 7x16mm 19000KV Brushed Motors Compatible Tiny Whoop Racing
Feature
This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.
Battery holder location is changed to a bit higher, enabling pilots to do perfect acro manuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear.
These 7x16mm 19000KV motors with JST 1.25mm 2P connector only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames and pecfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2.9g (including cables and connector).
The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
Description
BETAFPV Beta65S 65mm Whoop Frame Kit 3.6g V4 Version with 7x16mm 19000KV Brushed Motors for Tiny Whoop Racing
The Beta65S frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix, which is lighter and more durable. It works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs.
The biggesst advantage is using the most powerfull 7x16mm motors with up to19000KV value which can give this quad more power and more flight time than your regular 6mm Whoop.Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
Specifications
Beta65S Frame
Frame base: 65mm wheelbase distance
Frame motor holder: for 7x16mm coreless motors
Frame Color: Transparent white
Propeller: 3-blades 31mm props
Weight: 3.60.1g
7x16mm 19000KV Motor
Size: 7x16mm
Width: 7mm
Height: 16mm
Cable length: 50mm
Shaft Diameter: 0.8mm
Weight: 2.95g per motor(including cables and connector)
Speed: 19000KV
Voltage: 3.7V
Connector: JST 1.25mm 2P connector
Note:This is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment.
Package
1 * Beta65S 65mm frame
4 * BETAFPV 3-blade 31mm propeller
4 * 7x16mm 19000KV motors (2CW +2CCW)
2. BETAFPV 2pcs Beta65S V4 Version 65mm Whoop Frame Kit 3.6g Compatible for 7X16mm 19000KV Motor for Tiny Whoop Racing
Feature
This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.Battery holder location is changed to a bit higher, enabling pilots to do perfect acro manuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Best Match of 716 19000KV motors(Not including) give this quad more power and more flight time than your regular 6mm Whoop.
Support Struts is strengthened to prevent them from being broken after a harsh crash. The Beta65S V4 frame is far more flexible than the stiff V3 guy.
The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
Redundant design of the LED holder is removed in the V4 BETA 65S frame.
Description
BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit 3.6g V4 Version Compatible for 7X16mm 19000KV Motor for Tiny Whoop Racing
Specifications:
Frame base: 65mm wheelbase distance
Frame motor holder: for 7x16mm coreless motors(Not including)
Frame Color: Transparent white
Propeller: 3-blades 31mm props
Weight: 3.60.1g
Package
2 * Beta65S 65mm frame
3. QWinOut Happymodel Snapper6 1S 65mm Whoop Indoor Brushless Quadcopter 0603 RC Racing Drone BNF Version (with Frsky Receiver)
Feature
CNC aluminum alloy propeller guard.Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles. Adjust the settings and the PID of the flight controller via OSD.
Frsky version support both EU LBT and NON-EU Frsky transmitter. Frsky D8/D16 switchable; Compatible both of Non EU and EU LBT transmitter;Channels: 8ch or 16ch; Failsafe support;No ground interference ( Transmitter and receiver 1 m from the ground): 300m;
Full telemetry function ready. Head lights ready. Camera angle adjustable. Real Bind and Fly version.
Betaflight support , multi flight mode: ACRO/AIR/ANGLE. Powerful Brushless motor and Smooth ESC.;Motor; Mode: SE0603 KV19000; Configu-ration:9N12P; Stator Diamter:6mm; Stator Length:3mm; Shaft Diameter:0.8mm; Motor Dimension(Dia.*Len):9mm*15.5mm; Weight(g):1.7g; No.of Cells(Lipo):1S;Onboard 4in1 ESC; Power supply: 1S LiPo/LiPo HV (4.2v/4.35v); Current: 5A continuous peak 6A (3 seconds); Support BLHeliSuite programmable; Factory firmware: O_L_5_REV16_6.HEX; Default protocol: DSHOT600;
Description
Specifications:Brand Name: Happymodel
Mode Name: Snapper6
Item Name: 1S Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 23g(without battery); 31g(with battery)
Package includes:
Snapper 6 Frame *1
Crazybee F3 FC *1
SE0603 KV19000 Motor *4 31mm 3-blades propeller(4cw+4ccw)
700TVL 1/4 CMOS Camera & 5.8g 48CH 25MW VTX *1
3.8v 250mah 30C/60C battery *1
USB Lipo/LIHV Charger *1
Propeller disassemble tool *1
Screwdriver *1
Flight controller
Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
t-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
AIO Camera&VTX
Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
4. 1 Pair DYS MARS Brushless Motor 2400KV 3-6S for 230 250 280 300 FPV Racing Frame Multirotor Quadcopter (CW & CCW)
Feature
Item Name: DYS MARS Brushless MotorKV: 2400
Configu Ration: NP
No.of Cells (Lipo): 3-6S
Package Contents: 1 Pair Brushless Motor (CW & CCW)
Description
Item Name: DYS MARS Brushless MotorKV: 2400
Pull: 1.4kg
Configu Ration: NP
Stator Diameter: 23mm
Stator Length: 6mm
Shaft Diameter: M5
Motor Dimensions (Dia.*Len): 28.5x18.7mm
Weight (g): 34.36g
No.of Cells (Lipo): 3-6S
Max Continuous Current(A): 34.5A
Max Continuous Power(W): 574.4W
Internal Resistance: 0.04
Package Contents:
1 Pair Brushless Motor (CW & CCW)
If for any reason you are unhappy with any product, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
5. Armattan Gecko 3 inch Mini-Freestyle Frames FPV Racing Kit - Safely Guard Any 19mm Micro Cam : SD or HD and for Mini HD Split Camera Board (Runcam Split Mini or Caddx Turtle)
Feature
Designed around the best principals that brought the Japalura and the Rooster to the front of their fields,this frame gives you the best protection & quality that the multirotor kingdom has to offer.The cage is cut with 6 axis titanium milling. This is a first for Armattan, and it gives the head of this baby a smooth, svelte expression.
The stack mounting system is a fresh take on providing options for pilots. You no longer have to choose between an M2 or an M3 board because the Gecko offers provisions for both
The rear 20x20, M3 mounting holes will be there for your FC, ESC, VTX, or whatever else is left.The aluminum camera saver is a new mounting system designed to protect your camera even in the most crushing of cage crashes.
A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props.
Description
Armattan Gecko
The stack mounting system is a fresh take on providing options for pilots. You no longer have to choose between an M2 or an M3 board because the Gecko offers provisions for both. While the 20x20, M2, forward stack was designed to be used for a mini HD split camera board (such as the Runcam Split Mini or Caddx Turtle), you can slap any board you want in there. The rear 20x20, M3 mounting holes will be there for your FC, ESC, VTX, or whatever else is left. And with the familiar 22mm deck height you'll find that your batteries are safely out of the line of fire of your props, but are also low enough to bring the centre of gravity back down towards your prop-line.
The tail provides the quality mounting options that Armattan is known for. A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props. If that doesn't suit your fancy, simply use the elongated M3 holes to zip-tie your dongle in the tried-and-true way instead. Lastly, lets put an end to rear-impact delamination. The carbon itself is protected from impacts by the custom Aluminum standoffs.
Included
Titanium:
2x Camera-cage braces
Hardware:
8x 6mm button-head M3 bolts
4x 4mm button-head M3 bolts
4x 16mm buton-head M3 bolts
2x 5mm cup-head M2 bolts
2x M3 sunk nuts
Aluminum:
2x Camera-saver braces
1x 19.1mm Front standoff (silver)
2x Rear standoffs (black)
Nylon:
4x M3 nuts
2x Washers
Carbon Fiber:
1x 2mm Top (LiPo) plate
1x 3mm Main plate (3 inch)
Other:
1x Lipo strap
1x LiPo foam pad
4x Dog-bone landing pads
1x Molded rubber VTx antenna holder
6. Exinnos ALFA Monster 6mm Carbon Fiber 5/6/7inch FPV Freestyle Stretch X Quadcopter Frame Kit for RC Drone - (Frame arm: 6 inch)
Feature
Frame arm: 6 inchPackage Includes: 1XALFA MonsterFrame Kit
Quick disassembly design
6MM independent arm, fast demolition, unique design virtual bit less.
We also designed a fixed four arm of the aluminum alloy, so that the arm is not easy to shift.
Description
ALFA Monster 6mm Carbon Fiber 5/6/7inch FPV Freestyle Stretch X Quadcopter Frame Kit for RC DroneSpecifications:
Item name:ALFA MonsterFrame Kit
Wheelbase: 215mm(5inch)/245mm(6inch)/275mm(7inch).
Arm Thickness: 6MM.
Bottom Plate Thickness: 2.5mm.
Upper Plate Thickness: 2.5mm.
Height of aluminum column:30mm.
Camera angle range: 0-90.
Weight: 95g/103g/110g.
Material: 3K Carbon Fiber.
Recommend Parts(not included):
Flight Controller: Tower System/Kiss/F4/F3/Naze32/CC3D(Hole distance:30.5*30.5mm).
Motor: 22XX/23XX/24XX/25XX/26XX/27XX...Brushless Motor.
ESC: 20-100A Brushless ESC.
Propeller: 5-7inch.
Battery: 3/6S 1300-2200mAh Lipo Battery
Features:
Quick disassembly design
6MM independent arm, fast demolition, unique design virtual bit less.
We also designed a fixed four arm of the aluminum alloy, so that the arm is not easy to shift.
stretch X structure, suitable for racing with Freestyle fancy flight.
The position of the motor compartment is widened and the collision is not easy to hit the motor.
According to individual needs, can choose the frame assembly of battery on or under.
support RunCam Micro series FOXEER Micro series CADDX.US Micro series......and other FPV camera.
Package includes:
1XALFA MonsterFrame Kit
7. Rakonheli CNC 90mm Quadcopter Kit (6mm Motor) (Purple) - RKH 90RQX - Inductrix, Nano QX/QX2, Eachine
Feature
Rakon6090RQX980-V
Description
1. Description:
- Material: Aluminum alloy, 3K Pure Carbon Fiber and Delrin.
- Screws: Steel and Stainless Steel.
- Frame size 90mm, use with 6mm Brushed Motors.
- Weight: 4.65(g) = 0.164(oz).
2. Compatible:
- The Blade Nano QX, QX 2 and Inductrix Flight Control Board.
- The Eachine Beecore F3_EVO_Brushed ACRO Flight Control Board..
3. Package Included:
1 x Rakonheli CNC 90mm Quadcopter Kit (6mm Motor) (included hardware).
2 x 3M Double Side Tape (25x25mm).
4 x Oring 6x1mm.
10 x Rubber Band 20x2mm.
4. Option Parts (not included):
- Rakonheli CNC AL and CF 60mm Propeller Guard (4) (SKU: 60PG210).
- Rakonheli CNC Micro FPV Camera Mount Set (SKU: 010E384).
- Rakonheli CNC AL 7mm Brushed Motor Mount and Landing Gear (4) (SKU: 70B601).
- Rakonheli CNC AL 8mm Brushed Motor Mount and Landing Gear (4) (SKU: 80B601).
- Rakonheli CNC AL 8.5mm Brushed Motor Mount and Landing Gear (4) (SKU: 85B601).
8. Happymodel Snapper6 1S 65mm Whoop Indoor Brushless Quadcopter 0603 RC Racing Drone BNF Version (with Flysky Receiver)
Feature
CNC aluminum alloy propeller guard.Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles. Adjust the settings and the PID of the flight controller via OSD.
Flysky version support both AFHDS and AFHDS-2A Protocol Flysky transmitter. Flysky receiver Version:SPI BUS receiver;Protocol: AFHDS and AFHDS-2A Switchable;Channels: 8ch(AFHDS) or 14ch(AFHDS-2A);No ground interference ( Transmitter and receiver 1 m from the ground): 300mFailsafe support
Full telemetry function ready. Head lights ready. Camera angle adjustable. Real Bind and Fly version.
Betaflight support , multi flight mode: ACRO/AIR/ANGLE. Powerful Brushless motor and Smooth ESC.;Motor; Mode: SE0603 KV19000; Configu-ration:9N12P; Stator Diamter:6mm; Stator Length:3mm; Shaft Diameter:0.8mm; Motor Dimension(Dia.*Len):9mm*15.5mm; Weight(g):1.7g; No.of Cells(Lipo):1S;Onboard 4in1 ESC; Power supply: 1S LiPo/LiPo HV (4.2v/4.35v); Current: 5A continuous peak 6A (3 seconds); Support BLHeliSuite programmable; Factory firmware: O_L_5_REV16_6.HEX; Default protocol: DSHOT600;
Description
Specifications:Brand Name: Happymodel
Mode Name: Snapper6
Item Name: 1S Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 23g(without battery); 31g(with battery)
Package includes:
Snapper 6 Frame *1
Crazybee F3 FC *1
SE0603 KV19000 Motor *4 31mm 3-blades propeller(4cw+4ccw)
700TVL 1/4 CMOS Camera & 5.8g 48CH 25MW VTX *1
3.8v 250mah 30C/60C battery *1
USB Lipo/LIHV Charger *1
Propeller disassemble tool *1
Screwdriver *1
Flight controller
Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
t-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
AIO Camera&VTX
Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
9. BangBang Blade Inductrix Model MQDFV-75A 75mm Aggress Mini CNC DF DIY Frame Quadcopter Support 6mm Coreless Motor (1Pc: Color Silver)
Feature
Item NO.: MQDFV-75A, Wheelbase: 75mmMaterial of main frame: Carbon Fiber, Material of intake ring: Alloy CNC DFhttps://catalog.amazon.com/abis/Classify/SelectCategory?itemType=hobby-rc-quadcopters-and-multirotors&productType=TOYS_AND_GAMES&newCategory=622892011/623195011/623205011/11608079011&displayPath=All%20Product%20Categories%2FToys%20%26%20Games%2FHobbies%2FHobby%20RC%20Quadcopters%20%26%20Multirotors&recommendedBrowseNodeId=11608079011&itemName=#
Thickness of carbon main frame: 0.5mm, Motor diameter: 6mm
Airscrew: 30mm (1.2"), Size: L89mm x W89mm x H22mm, Bare weight: 6g (Motor not included)
Package included: 1 x MQDFV-75A Aggress Mini DF Frame Quadcopter 4 x Motor bracket 4 x Rubber mat 12 x Scres (M1x2mm)
Description
Description:Blade Inductrix Model MQDFV-75A 75mm Aggress Mini CNC DF DIY Frame Quadcopter Support 6mm Coreless Motor
Item Name: Aggress Mini DF
Item NO.: MQDFV-75A
Wheelbase: 75mm
Material of main frame: Carbon Fiber
Material of intake ring: Alloy CNC DF
Thickness of carbon main frame: 0.5mm
Color: Silver
Motor diameter: 6mm
Airscrew: 30mm (1.2")
Size: L89mm x W89mm x H22mm
Bare weight: 6g (Motor not included)
Features:
- Optimized for weight and durability.
- Mini DF version quad for 6mm motor.
- The landing is designed by Rubber material to reduce bounce when grounding.
Package included:
1 x MQDFV-75A Aggress Mini DF Frame Quadcopter
4 x Motor bracket
4 x Rubber mat
12 x Scres (M1x2mm)
10. 4pcs EMAX RS1106 6000KV Brushless Motor Racing Edition for 60 70 80 90 100 FPV Racing Drone Quadcopter by Crazepony
Feature
High Quality Guarantee: The new standard of EMAX RS1106 1106 6000KV brushless motor supporting 2-3S Lipo is upgraded with features mini racing multirotors absolutely need. The motor yields faster bell rotational response, higher thrust-reach 330g than other 1106 brushless motorCooling Quickiy: This1106 brushless motor is also one of the only micro brushless motors with active cooling fins integrated into the bell to keep magnets cooler so the power is consistent lap after lap
Two Size: The bell housing has two sizes of hole spacing to fit most powerful micro motors for 2 inch to 3 inch propellers, such as Prop bolt pattern for Emax 2345 M2 x 9mm and M2 x 5mm Propellers, to get the more powerful pulling
More Detail: High Quality NSK bearings for long lasting smoothness,the RS1106 has 6mm tall stator to provide the instantaneous torque that is usually lacking in high 1104 motors
Precision CNC: To ensure smoothness, each motor is precision CNC to declide the mechanical vibration, which uses premium ball bearings and comes factory balanced.
Description
4pcs EMAX RS1106 6000KV Brushless Motor Racing Edition for 60 70 80 90 100 FPV Racing Drone Quadcopter by Crazepony
Features
1.This is one of the most powerful micro motors for 2''to 3'' propellers
2.Strong N52SH Magnets,Factory balanced precision CNC motor bells
3.Suit prop bolt pattern for Emax 2345 M2 x 5mm and other M2 x 5mm Propellers
4.To ensure smoothness each motor is precision CNC, uses premium ball bearings and comes factory balanced
5.High quality NSK bearings for long lasting smoothness
Specification:
Brand name: EMAX
Item model: RS1106
KV: 6000KV(2-3s)
Framework:9N12P
Weight: 7g (w/ O silicone wire)
Recommend Parts (not included):
Propeller: 2 inch and3 inch 2040 2035 3035 etc
Frame:60 70 80 90 100 etc mini micro FPV racing drone
Package Including
4* Emax RS1106 6000KV Brushless Motor
Tip: If you only need one RS1106 motor, you can click our store to know more.
Recent Comments