10 best h11 hid wire harness for 2022
Finding your suitable h11 hid wire harness is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best h11 hid wire harness including detail information and customer reviews. Let’s find out which is your favorite one.
Best h11 hid wire harness
1. iJDMTOY H11 (H8 or H9) Wire Harness for HID ballast to stock socket for HID Conversion Kit
Feature
2 pieces20 inches long
H11 H8 H9 lamp connector
Pre-Wired for Plug and Play. No need to modify the stock wires at all
High beam extended wire is also included
Description
This page features one pair (2 pieces) brand new heavy duty connection wiring
harness (from HID ballast to stock socket) for H11 (aka H8 or H9) bulb size HID Conversion Kit.
This plug-N-play wire is compatible with both 35W and 55W HID Conversion Kits.
2. ZEEZ HID - H11 / H8 / H9 / H16 Relay Harness For Xenon HID Conversion Kit
Feature
MAXIMUM OF 50W POWER SUPPORTDRAWS POWER FROM THE BATTERY
POLY SYNTHETIC WIRE COVER TO PREVENT DAMAGE FROM EXCESSIVE HEAT
GUARANTEED NOT TO SHORT YOUR VEHICLE
CONNECTOR TO OEM SOCKET
Description
Relay Harness For Xenon HID Conversion KitFeatures and Benefit
-MAXIMUM OF 50W POWER SUPPORT!
-BLACK NEGATIVE WIRE; RED POSITIVE WIRE
-CONNECTOR TO OEM SOCKET WHICH ALLOWS THE THE HID TO TURN ON AND OFF WITH THE CONTROL OF THE VEHICLE'S LIGHT SWITCH
-2x HID BULB CONNECTOR WIRES
-DRAWS POWER FROM THE BATTERY
-NOT THE VEHICLE'S ELECTRICAL SYSTEM
-GUARANTEED NOT TO SHORT YOUR VEHICLE POLY SYNTHETIC WIRE COVER TO PREVENT DAMAGE FROM EXCESSIVE HEAT
-E-MARK AND CE APPROVED
-EXTRA LONG WIRES AND WIRE TIES FOR A CLEAN INSTALLATION
-Not Compatible With Bi-Xenon High Low Beam HID Kit
3. HID Relay Wiring Harness Xenon HID Conversion Kit Universal Single Beam Wire Harness for H1 H3 H4 H7 H8 H9 H10 H11 H13 9004 9005 9006 9007 9140 9145 5202 880 884
Feature
HIGH PERFORMANCE - Produce brighter light than halogen,increases more visibility,use less power,and has long lasting non-fading lifetime.PROTECTION - Deliver steady voltage directly from car battery to protect your HID system.Wires are covered with heat shield and heat shrink to protect from water.
RESOLVE ISSUES - For vehicles with poor battery,alternator or heavy draw on power from stereo's.No more flickering or shut-off issues due to low voltage and works around many DRL (Daytime Running Light)systems.
UNIVERSAL FITMENT - For all single beam bulbs:H1 H3 H4 H7 H8 H9 H10 H11 H13 9004 9005 9006 9007 9140 9145 5202 880 884.
SPECIFICATIONS - Power for both passenger and driver side headlights.Fuse:30amp Relay:40amp Voltage:12v DC Tubing Material:PVC Compatible 35w-55w.
Description
Protects your HID system by drawing stable current directly from your battery
No more flickering due to low electrical current
40 Amp relay and 30 Amp fuse
High Quality materials for maximum durability and performance
One relay harness powers both driver and passenger sides
Fits all single beam bulbs - H1, H3, H4, H7, H8, H9, H10, H11, H13, 5202, 880, 881, 9004, 9005, 9006, 9007
Includes : 1x Kensun High Quality HID Universal Single Beam Relay Harness
4. H1 H3 H7 H11 9005 9006 HB4 Single Beam HID Conversion Kit Relay Wire Harness
Feature
9005 9006 H11Description
relay harness5. iJDMTOY (1) H11/H8 Relay Harness Wire Kit with LED Light ON/OFF Switch For Aftermarket Fog Lights, Driving Lights, HID Conversion Kit, LED Work Lamp, etc
Feature
Works with H11/H8 lighting applications with an easy installation process (Installation Guide https://youtu.be/KaaVSg6MMWk)Good for any system between 9V-16V with wattage not exceeding 130W
Comes with relay module box, wiring harness w/ adapters, safety fuse box, and LED indicator on/off switch
Good For Replacement fog lamps, Add-on fog lights, HID lights, LED daytime running lights, Driving lights, LED work lights, Off-road lighting kit
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
This page features one set of brand new H11/H8 relay wiring harness with On/Off switch, universal fit for replacement fog lamps, HID lights, add-on fog lights, LED daytime running lights, LED work lights and many many more.
Good For
Replacement fog lamps
Add-on fog lights
HID lights
LED daytime running lights
Driving lights
LED work lights
Off-road lighting kit
Universal for most vehicles:
Acura Integra MDX NSX RDX RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Corvette Cruze Malibu Silverado 1500 2500 3500 Tahoe
Dodge Challenger Charger Dart Durango Neon Nitro Ram
Ford Edge Escape Explorer F-150 F-250 F-350 Fiesta Flex Focus Fusion Mustang
GMC Canyon Denali Sierra Yukon
Honda Accord Civic CR-V CR-Z Element Fit Pilot S2000
Hyundai Genesis Santa Fe Sonata Tiburon
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX56 QX60 QX70 QX80
Jeep Grand Cherokee Liberty Wrangler
Lexus CT ES GS GX HS IS LS LX RX
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GLA GLK M Class
MINI Cooper
Nissan 350Z 370Z Altima Cube Frontier GT-R Juke Maxima Murano Rogue Sentra Titan
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Prius RAV4 Sequoia Sienna Tacoma Tundra
Volkswagen Beetle CC Golf GTI Jetta Passat Rabbit
6. Somaer HID Conversion Kit with 12V 40A Relay 30A Fuse and 18AWG Single Beam Relay Wiring Harness - 9005 9006 HID Wiring Relay Harness
Feature
HID Relay Wiring Harness can ensure the stability of the HID Ballast and improve the service life of the XENON BULB for a long time,Solves Issues with Poor Electrical Systems.Product Structure:12V 40A High Quality Relay, 30A FUSE,6.3 Ground Ring,9005 male,18AWG,8ft etc.
Compatible with Single Beam sizes: H1,H3,H4,H7,H8,H9,H10,H11,H13,5202,9004,9005,9006,9007 etc.
Easy and Simple Installation,follow the HID XENON BULB with relay wiring harness control manual.
Packaging and Warranty: 1 SET HID Xenon Relay Harness with a 12-month warranty.
Description
This HID Wiring Harness is 18 gauge, which can be used to control two HID xenon ballast. In the case of the installation of two HID xenon ballast: Each light can support the maximum power of35W.
You do not need too much expertise to install the set of harness control system, it is very simple, in order to better install the wire harness system and you can save lots of time, please follow the following steps:Installing
wiring harness system.
Installing wiring harness system:
1, Parking and closing the vehiclel. At the same time to ensure that the light has been installed, if not installed, please install the light to the desired location.
2, Removing the original light's wiring control system.
3, Connecting the power wire with the light power supply power wire connector, for two lights, starting from the farthest, and make sure good seal by electrical tape. When connecting, make sure that it is not scratched by any object
on the vehicle, in order to avoiding electric leakage.
4, Connecting the connector(position #1 on the diagram) to positive terminal of the battery.
5, Connecting the connector(position #2 on the diagram) to negative terminal of the battery.
6, Connecting the connector(position #3 on the diagram) to Power supply port of original car bulb.
7, Fixed and tied the wiring harness system (the relay is generally tied to the position near battery, the other lines in the process of fix should avoid damage).
Note:
If you are installing them to a big truck, the wires might not be long enough and you will need to extend the wires on your own.
the safety of the wiring harness is controlled by fuse. Now in order to help customer choice correct fuse, we provide a fuse point calculate formula: fuse amps * 1.35 = fuse point
amps.
7. iJDMTOY (2) H11 H8 H9 Extension Wiring Harness Sockets Wires For Headlights or Fog Lights Use
Feature
100% Brand new, never used 1 pair (left side and right side harness) H11/H8 lamp connector16 Gauge wire, high efficient copper wiring, male and female connector included
Pre-Wired for Plug and Play. No need to modify the stock wires at all
PVC Nylon plugs
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
This auction features one pair brand new H11/H8 extension wiring harness made with high temperature nylon for headlights, fog lights. It has easy plug and play pre-wire socket and heat resistant PVC plastic plug.8. iJDMTOY H11 880 890 Relay Wiring Harness For HID Conversion Kit, Add-On Fog Lights, LED Daytime Running Lamps and more
Feature
H11 or 880 adapters (also work for H8, H9, 881, 882, 883, 890, etc); 40AMP relayIn-line safety fuse included
For both driver side and passenger side
Good for add-on fog lights, LED work light, HID conversion kit, daytime running lights, etc
Improved easier trigger wire, you just need to tap this one piece to any 12V + or fuse box ACC to draw power
Description
This page features one set brand new battery relay wiring harness for bulb size H11 or 880.
You can use this H11/880 relay harness for installing add-on fog lights, HID conversion kit, daytime running lights, work lamps, LED angel eyes and many other lighting applications with these easy plug-able female adapters.
Good For
Replacement fog lamps
Add-on fog lights
HID lights
LED daytime running lights
Driving lights
LED work lights
Off-road lighting kit
Universal for most vehicles:
Acura Integra MDX NSX RDX RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Corvette Cruze Malibu Silverado 1500 2500 3500 Tahoe
Dodge Challenger Charger Dart Durango Neon Nitro Ram
Ford Edge Escape Explorer F-150 F-250 F-350 Fiesta Flex Focus Fusion Mustang
GMC Canyon Denali Sierra Yukon
Honda Accord Civic CR-V CR-Z Element Fit Pilot S2000
Hyundai Genesis Santa Fe Sonata Tiburon
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX56 QX60 QX70 QX80
Jeep Grand Cherokee Liberty Wrangler
Lexus CT ES GS GX HS IS LS LX RX
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GLA GLK M Class
MINI Cooper
Nissan 350Z 370Z Altima Cube Frontier GT-R Juke Maxima Murano Rogue Sentra Titan
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Prius RAV4 Sequoia Sienna Tacoma Tundra
Volkswagen Beetle CC Golf GTI Jetta Passat Rabbit
9. Ricoy 12V 40A H11 Fog Light Wiring Harness Sockets Wire LED indicators Switch For Aftermarket Fog Lights, Driving Lights, HID Conversion Kit, LED Work Lamp, etc
Feature
Works with H11 lighting applications with an easy installation processEasy and Simple installation. Usually takes less than 20 minutes! "Plug-and-Play" in most vehicles. Some vehicles may need professional installation. The manufacturer provides free full technical support with hundreds of thousands of satisfied users.
Comes with 12V 40A relay module box, wiring harness w/ adapters, safety fuse box, and LED indicator on/off switch
Good For Replacement fog lamps, Add-on fog lights, HID lights, LED daytime running lights, Driving lights, LED work lights, Off-road lighting kit
Pack include : 1 x fog light wire harness (fog light is NOT included) 1 x switch with LED indicators1 x 12V/40A automotive relay
Description
SPECIFICATIONS Condition: 100% new Color: Black Material: high quality plastic & metal Voltage: 12V Current: 40A Suitable for: H11 Bulbs interface Note: please ensure the interface of our item before purchase Item included: 1 x fog light wire harness (fog light is NOT included) 1 x switch with LED indicators 1 x 12V/40A automotive relay Compatible: For Acura ILX sedan 4 door 2013-2014, For Acura RDX 2010-2014, For Acura TL 2012-2014, For Acura TSX 2011-2014, For Ford C-Max / Fusion 2013-2014, For Ford Explorer / Transit Connect 2011-2014, For Ford Focus 2008-2014, For Ford Freestyle 2005-2007, For Ford Mustang 2005-2014, For Ford Ranger 2005-2011, For Ford Taurus X 2008-2009, For Ford Fiesta 2014, For Infiniti EX35/EX37/QX50 2008-2015, For Infiniti FX35/FX37/FX45/FX50/QX70 2006-2015, For Infiniti G25/G37/Q60 Sedan 2010-2014, For Infiniti M37/M56/Q70 2011-2015, For Honda Crosstour 2013-2014, For Honda CR-V / Pilot 2012-2014, For Jaguar S-Type / X-Type 2004-2008, For Jaguar XK 2009-2010, For Lincoln LS 2005-2006, For Lincoln Navigator 2007-2014, For Nissan Sentra 2007-2012, For Nissan Cube 2009-2015, For Nissan Juke / Quest 2011-2014, For Nissan Murano 2009-2014, For Nissan Rogue 2011-2013, For Nissan Versa 2007-2012, For Subaru Outback 2010-2012, For Suzuki Swift 2009-2013, For Suzuki Swift+ 2005 DESCRIPTION Feature: 1) Supports up to 2 fog lights. 2) Easy to install. 3) Perfect match for the original car. 4) Stable characteristics, high reliability.10. Xotic Tech H11 H8 H9 Wire Wiring Harness for HID ballast to stock socket for HID Conversion Kit, H11 H8 Sockets to 9006 Bulbs Adapter Power Cords Cable For Headlight Fog Lamp
Feature
One pair (2 pieces) brand new H11 / H8 / H9 bulbs size HID connection wiring harnessMale and female sockets included to connect HID ballets to H11 / H8 / H9 stock socket
Extended wire for high beam include
Length: Approx 20" long
High quality 16 Gauge copper wiring
Description
This listing is for 2 pieces of H11 / H8 / H9 bulbs size HID connection wiring harness good for heavy duty use.You can use this item to connect HID ballasts to H11 / H8 / H9 size stock socket. It will fit both 35W and 55W HID conversion kits. This item is direct plug and play conversion, no modification needed.
Recent Comments